Instrukcja obsługi WMD Subway

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla WMD Subway (1 stron) w kategorii Niet gecategoriseerd. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/1
AN (Knob & CV Input): Scans
rough the inputs that are
abled. The potentiometer
comes an attenuator when a CV
applied to the jack.
OUT (Jack & LED): Output of t
the crossfader. Bicolor LED
bipolar signals.
SUBWAY
8 INPUT 1 OUTPUT SCANNING CROSSFADER
INPUTS: DC coupled inputs for
the signals you would like to scan
through.
ENABLES: Buttons that enable and
disable the associated input. When
an input is disabled the signal will
be removed from the scanning
crossfade.
SPECS:
Size: 6hp
Depth: 38mm (with cables)
Power: +80mA, -22mA
100k ohm input/CV impedance
1k ohm output impedance
20Vpp range
Memory:
Front panel settings save to
EEPROM 1 minute after last button
press.
Digitally controlled analog signal
path operates at 48kHz
FADE CURVES: Subway has 3
selectable crossfade curves.
Choose a curve by holding one of
the following buttons on startup:
1. Linear
2. Exponential
3. Equal Power
Subway is the intelligent crossfader for multiple signals that we never knew we needed. Eight
inputs that can all be crossfaded transparently in analog by a smart digital control interface.
The uses for Subway are endless. Dramatically increase the timbral possiblities of your os-
cillator(s) or turn any module with multiple outputs into a continuously crossfading system.
Subway will nd plenty of uses in your rack.

Specyfikacje produktu

Marka: WMD
Kategoria: Niet gecategoriseerd
Model: Subway

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z WMD Subway, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niet gecategoriseerd WMD

WMD

WMD Kraken Instrukcja

21 Września 2024
WMD

WMD Subway Instrukcja

21 Września 2024

Instrukcje Niet gecategoriseerd

Najnowsze instrukcje dla Niet gecategoriseerd

Playtive

Playtive IAN 366944 Instrukcja

21 Września 2024
Motu

Motu HDX-SDI Instrukcja

21 Września 2024
VAX

VAX Dual W86-DP-A Instrukcja

21 Września 2024
Olivetti

Olivetti ECR 8220 Instrukcja

21 Września 2024
Conair

Conair TS240X Instrukcja

21 Września 2024
Conair

Conair HCT45N Instrukcja

21 Września 2024
Fluance

Fluance P110 Instrukcja

21 Września 2024
Conair

Conair BEH17 Instrukcja

21 Września 2024
Steren

Steren TC-1240 Instrukcja

21 Września 2024