Instrukcja obsługi Wimberley M-8

Wimberley nieskategoryzowany M-8

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Wimberley M-8 (4 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/4

Wimberley, Inc. - - - Phone: 1 434 529 8385

1750 Broadway St Toll Free: 1 2746 -888-665-(USA & Canada)

Charlottesville, VA

22902 USA www.tripodhead.com info@tripodhead.com

Instructions on Reverse >>

Wimberley, Inc. - - - Phone: 1 434 529 8385

1750 Broadway St Toll Free: 1 2746 -888-665-(USA & Canada)

Charlottesville, VA

22902 USA www.tripodhead.com info@tripodhead.com

5 Year Warranty – See www.tripodhead.com/warranty.cfm for complete details

Made in USA

Package Contents:

•M 8 Module: QR -Perpendicular Plate (Qty 1)

•Safety Stop Screw: M3 x 6mm (Qty 1)

•Hex Key: 2.5mm (Qty 1)

Weight: 3.0 oz

Dimensions (Overall L x W x H): 4.54 in x 1.5 in x 1.0 in

Materials: Anodized 6061 Aluminum, stainless steel fasteners

M 8- Perpendicular Plate

Flash Bracket Module

Pre requisites:-

The M 8 requires a camera body plate or L- - -bracket with Arca Swiss style dovetails attached to the bottom of your camera.

The M 8 is compatible with most Arca- -Swiss style dovetails such as those from Really Right Stuff and Kirk Enterprises.

Note: The M 8 is not compatible with most fixed width quick release clamps or plates made by Manfrotto or Gitzo.- - -

Safety Stop

Screw

Instructions continued >>

The Perpendicular Plate comes with one 3mm screw and a matching hex key. This screw can be inserted into the threaded hole in the

bottom of the plate to serve as a stop that prevents the plate from accidentally sliding out of the quick release clamp if the clamp is -

accidentally loosened (the knob at the back of the Perpendicular Plate keeps it from sliding out in the other direction).

If you opt to use the stop screw, you must open the jaws of the quick release clamp wide enough to load the plate from the top -

(instead of sliding it in from the side). Top loading is a little less convenient, but if you use the safety stop screw you can be

certain that your camera will not slide out of the clamp.

Using the stop screw will make it more difficult to quickly attach a flash bracket to the bottom of the plate.

However the stop screw will not interfere with attaching a flash bracket to the top surface of the plate.

1. Widen the jaws of the M 8 clamp by turning the clamp knob. The camera plate should seat flush against the clamp surface and slide in -

easily. Note: If you have safety stop screws installed on your camera body plate, you will need to top load the plate into the M 8 clamp-.

2. Tighten the M 8 clamp knob firmly to secure the camera plate within the clamp jaws.-

Tighten Knob

Safety Stop Screw:

Connecting the M 8 to Your Camera:-

Loosen knob and

slide into place

Arca Swiss style -

camera body plate

or L bracket-

Instructions continued >>

Attaching Two Wimberley Macro Flash Brackets to Your Camera Body:

Attach one bracket to the bottom dovetail of the plate, and one bracket to the top dovetail. You may have to experiment with the ex-

act configuration of the macro brackets to insure that you have enough room to easily grab the camera and manipulate the flash

brackets.

Use as a Macro Slider:

By sliding the M 8 Perpendicular Plate in the quick release clamp of your tripod head, you can make small forward and backward adjust-- -

ments in the position of you camera as shown below. This is useful for macro photography. Note: The Perpendicular Plate is not designed

to give you the range of motion and precise adjustability of a rack pinion focusing rail.-and-

The Perpendicular Plate gives you about 1.7 inches of total forward backwards adjustment. This amount of adjustment is most useful -

when you are doing macro photography in the 1:1 scale range. Often you want to get as close to a subject as possible, but after you ve ’

positioned your tripod you may find that you are too close and the subject is just out of the focal range of your lens. Use the Perpendicular

Plate to slide your camera backward or forward just enough to get your subject in focus.

M 8-

P 5 plate-

M 1-

M 4-

F 2 Macro-

Flash Bracket

(includes M 1 and M- -4)

In order to insure that the M 8 plate is -

clamped securely, it is important to

make sure that the end of the plate

extends at least ½ inch beyond the

middle of the clamp.

We recommend installing the safety

stop screw provided with the M-8

plate to prevent the plate from acci-

dentally sliding out of the clamp when

it is loosened (Previous Page)

Caution: When using the perpendicular plate

as a macro slider, you may end up sliding the

plate so far back in the clamp that it is no longer

properly clamped.

Specyfikacje produktu

Marka:	Wimberley
Kategoria:	nieskategoryzowany
Model:	M-8

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Wimberley M-8, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje nieskategoryzowany Wimberley

Wimberley M-8 Instrukcja

19 Czerwca 2024

Wimberley M-1 Instrukcja

19 Czerwca 2024

Wimberley MH-100 Instrukcja

19 Czerwca 2024

Wimberley F-1 Instrukcja

19 Czerwca 2024

Wimberley M-3 Instrukcja

19 Czerwca 2024

Wimberley F-6 Instrukcja

19 Czerwca 2024

Wimberley M-5 Instrukcja

19 Czerwca 2024

Wimberley M-2 Instrukcja

19 Czerwca 2024

Wimberley FA-11 Instrukcja

19 Czerwca 2024

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Meec Tools 010-084 Instrukcja

6 Października 2024

Outwell Scenic Road 250 Instrukcja

5 Października 2024

Impact Qualite QL-3560-LED Instrukcja

4 Października 2024

Impact QuikBalance Instrukcja

4 Października 2024

Impact CA-112 Instrukcja

4 Października 2024

Impact Forever Ready Cool FRC-24-LED Instrukcja

4 Października 2024

Impact LS-BHA Instrukcja

4 Października 2024

Impact LKB-5C Instrukcja

4 Października 2024

Impact Varipole Drop Ceiling Adapter Instrukcja

4 Października 2024

Impact RST-001 Instrukcja

4 Października 2024