Instrukcja obsługi WilTec 51541
WilTec
pompa wody
51541
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla WilTec 51541 (10 stron) w kategorii pompa wody. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/10
Operation Manual
Waste Water Pump
51537–51541
Similar to image, may vary depending on model
Read and follow the operating instructions and safety information before use.
Technical changes reserved!
Due to further developments, illustrations, functioning steps, and technical data can differ slightly.
https://www.XPOtool.com Item 51537–51541 Page 2
The Tool Experts
08 2022-1
The information contained in this document may alter at any time without previous notice. It is prohibited
to copy or spread any parts of this document in any way without prior written allowance. All rights re-
served.
The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this
operating manual, nor in the diagrams and figures shown.
Even though, the WilTec Wildanger Technik GmbH has undergone biggest possible efforts to ensure
that the operating manual is complete, faultless, and up to date, mistakes cannot be entirely avoided.
If you should find a mistake or wish to make a suggestion for improvement, we look forward to hearing
from you.
Send an e-mail to:
service@wiltec.info
or use our contact form:
https://www.wiltec.de/contacts/
The most recent version of this manual in various languages can be found in our online shop via:
https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler
Germany
To return orders for exchange, repair, or other purposes, please use the following address. Attention!
To allow for a smooth execution of your complaint or return, it is important to contact our customer
service team before returning the goods.
Returns Department
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler
E-mail: service@wiltec.info
Tel: +49 2403 55592–0
Fax: +49 2403 55592–15
https://www.XPOtool.com Item 51537–51541 Page 3
The Tool Experts
08 2022-1
Introduction
Thank you very much for purchasing this quality product. To minimise the risk of injury, we ask you to
comply with basic safety precautions, when using this product. Please read this operating manual thor-
oughly and ensure you have understood them. Keep this operating manual for future reference.
Please note before starting:
The pump can be attached to any protective contact socket, which has been installed properly. The
socket needs a supply voltage of 230 V and a fuse of at least 6 A.
Warning! If the pump is meant to be used near swimming pools or garden ponds and in their
protective area, it needs to be equipped with an earth fault circuit breaker with a normal tripping current
of max. . The pump must not be operated if there are people within the pool or pond. Please 30 mA
contact an electrician.
Safety notes for the pump
General safety notes
• Know the application of the pump and ensure to be familiar with the limitations and potential
dangers.
• Make sure that the electricity source corresponds to the requirements of the device.
• Disconnect the pump from the electricity supply before carrying out any maintenance work.
• Release the pressure from the system before maintaining a part.
• Release the liquid from the system before maintaining the pump.
• Secure the pressure line before starting the pump. An unsecured pressure line can retaliate and
thus lead to injuries and/or damages.
• Check the hose for wear and damage before every use. Ensure that all connections are se-
cured.
• Occasionally check the pump and the system components. Keep the pump and the system free
of residues and foreign bodies. If necessary, carry out a routine maintenance.
• Keep a remedy for pressure relief near pumps, the pressure lines of which can be closed off or
clogged.
Personal safety
• Always wear protective glasses when working with the pump.
• Keep your working area clean, tidy, and well illuminated. Store tools and equipment when the
pump is not in use.
• Keep bystanders away from your working area.
• Make sure to make the working area safe for children by using padlocks and main switches and
by removing ignition keys.
• When connecting an electrically powered pump, all electrical and safety instructions need to be
regarded.
• The pump motor is equipped with an automatic resetting thermal protection and can unexpect-
edly re-start.
• Danger of electric shock: This device is designed to only be operated with 230 V. To reduce the
risk of electric shock, ensure that the pump is connected to a safety plug properly installed.
• The entire wiring should be done by a qualified technician.
• Protect the power cable from sharp objects, hot surfaces, oil, and chemicals. Avoid bending the
cable. Damaged or worn cables need to be replaced immediately.
• Use cables with a sufficient size to minimise a voltage drop to the motor.
• Do not touch a running motor. Modern motors can reach very high temperatures when running.
Specyfikacje produktu
| Marka: | WilTec |
| Kategoria: | pompa wody |
| Model: | 51541 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z WilTec 51541, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje pompa wody WilTec
9 Września 2024
9 Września 2024
9 Września 2024
9 Września 2024
9 Września 2024
9 Września 2024
9 Września 2024
9 Września 2024
9 Września 2024
9 Września 2024
Instrukcje pompa wody
- pompa wody Gardena
- pompa wody Einhell
- pompa wody Fiap
- pompa wody Sunnydaze Decor
- pompa wody Garden Feelings
- pompa wody CMI
- pompa wody Hozelock
- pompa wody Meec Tools
- pompa wody Güde
- pompa wody Eden
- pompa wody Hayward
- pompa wody JUNG
- pompa wody Proviel
- pompa wody De Dietrich
- pompa wody Eurom
- pompa wody Yellow Garden Line
Najnowsze instrukcje dla pompa wody
6 Października 2024
1 Października 2024
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
10 Lipca 2024
8 Lipca 2024
18 Czerwca 2024
11 Czerwca 2024