Instrukcja obsługi Whynter KS-1100

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Whynter KS-1100 (6 stron) w kategorii waga kuchenna. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/6
WHYNTER Digital Wall Kitchen Scale
MODEL: KS-1100
Please read this instruction booklet completely before operating.
SPECIFICATIONS
Equipped with a high precision strain gauge sensor system
Capacity: 2kgx1g
Auto off & Manual off
Tare function
Over load / Low battery indicator
Electronic clock, countdown timer with alarm
POWER SUPPLY
1 x 3V CR2032 lithium battery (included)
When the LCD indicates “ , please open the battery cover at the bottom of the unit and
replace the battery with a new one.
ASSEMBLE AND INSTALL THE SCALE TO THE WALL
(Please choose a smooth and flat wall surface to install the scale.)
STEP 1: Use the paper card as reference to drill 4 holes on the wall. (Make sure that the
reference card is horizontal)
STEP 2: Drill in the screw knots(plug) into the 4 holes
STEP 3: Install the fixture plates to the holes and drill in the screws tightly to secure the
plates.
STEP 4: Pull the insulating tape out of the battery cover of the scale.
STEP 5: Insert the scale to the fixture plates and press downwards then push to the right.
OPERATION
STEP 1: Pull down the glass platform of the scale.
STEP 2: Press the “ON/TARE” button and the scale will display “HELO”, and then zero.
The scale is now ready for weighing.
STEP 3: Put the food / ingredient on the glass platform, the weight will appear on the
display.
STEP 4: After use, press the “MODE” button, the system return to clock mode.
STEP 5: Push glass platform upwards when not in use.
TARE FUNCTION
STEP 1: In the weighing mode, put the container on the glass platform, the display will
show the weight of container.
STEP 2: Press the “ON/TARE” button again, the display will show zero. Put the food/
ingredient into the container, the weight of the food/ ingredient will appear on the display.
TIME SETTING
Press the “MODE” button for a few seconds to turn on the time setting function.
Minute will flash on the display.
Press the “UNIT” button to setup the minute.
Press the “MODE” button again, hour will flash on the display.
Press the “UNIT” button to setup the hour.
After finish setting the time, press the “MODE” button to exit Time Setting.

Specyfikacje produktu

Marka: Whynter
Kategoria: waga kuchenna
Model: KS-1100

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Whynter KS-1100, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje waga kuchenna Whynter

Whynter

Whynter KS-1100 Instrukcja

1 Października 2024

Instrukcje waga kuchenna

Najnowsze instrukcje dla waga kuchenna

Soehnle

Soehnle Anna 67003 Instrukcja

14 Października 2024
Ufesa

Ufesa BC1100 Instrukcja

9 Października 2024
Ufesa

Ufesa BC1450 Instrukcja

9 Października 2024
Ufesa

Ufesa BC1550 Instrukcja

9 Października 2024
Ufesa

Ufesa Precision BC1700 Instrukcja

9 Października 2024
Taylor

Taylor 384521 Instrukcja

9 Października 2024
Adler

Adler AD 3181 Instrukcja

9 Października 2024
Adler

Adler AD 3180 Instrukcja

9 Października 2024
Soehnle

Soehnle 66308 Instrukcja

9 Października 2024
Innoliving

Innoliving INN-137 Instrukcja

8 Października 2024