Instrukcja obsługi White Knight WKCD40

White Knight Wentylator WKCD40

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla White Knight WKCD40 (5 stron) w kategorii Wentylator. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/5
WKCD40 ELECTRIC FAN
IMPORTANT INSTRUCTIONS
1. Read all instructions carefully before you use the appliance.
2. Remove the packaging and ensure that the appliance is undamaged. In case
of doubt do not use the fan and contact your supplier.
3. Do not let children play with parts of the packaging (such as plastic bags).
4. Before plugging the fan into the socket, check that the voltage of your mains
supply matches the voltage marked on the rating label of the appliance.
5. Before assembling or dismantling the fan, ensure that the fan is unplugged.
6. Before unplugging the supply cord, turn off the switch at the socket outlet.
7. Do not insert any object into the guard while the fan is operating.
WARNING: RISK OF INJURY.
8. The fan is meant for use in temperate climates. Do not use the fan in high
humidity or a dusty area.
9. Do not hang any clothes on the fan guards.
10. Do not use the fan outdoors.
INSTRUCTION MANUAL
Description of Parts
Caution
This appliance is for household use only. Any servicing other than cleaning
and user maintenance should be performed by an authorised service
representative. Do not immerse the unit in water. To reduce the risk of fire or
electric shock, do not remove the housing. The fan has no user serviceable parts
inside. Only authorised service personnel should handle repair work.
If the supply cord is damaged, it must be replaced by the manufacturer or its
service agent or a similar qualified person in order to avoid a hazard.
Assembly of the base
1. Remove the base mounting nut from the stand
by turning it anti-clockwise.
2. Feed the supply cord through the opening in
the base.
3. Insert the stand into the base and tighten the
base mounting nut clockwise
4. Lead the supply cord through the recess at
the side of the base.
Assembly of the fan
1. Remove the blade cap from the motor shaft and remove the guard lock nut
from the motor body.
2. Fit the rear guard to the motor body, by positioning on the location pins.
Secure the guard to the motor body with the guard lock nut.
3. Push the fan blade onto the motor shaft by matching the slots on the base of
the fan blade with the shaft pin. Secure the blade with the blade cap, turning
it in an anti-clockwise direction. Check that the fan blade rotates freely by
turning it with your hand.
4. Open the securing clip at the bottom of the front guard and loosen the clip
screw. Position the top clip on the uppermost part of the rear guard. Push
the top clip down and press rim of the front guard onto the rear guard.
Close the bottom clip and tighten the screw.
Operations
1. 3-Step Speed Control
OFF 0
LOW 1
MEDIUM 2
HIGH 3

Specyfikacje produktu

Marka: White Knight
Kategoria: Wentylator
Model: WKCD40

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z White Knight WKCD40, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Wentylator White Knight

White Knight

White Knight WKCD40 Instrukcja

22 Sierpnia 2024

Instrukcje Wentylator

Najnowsze instrukcje dla Wentylator

Air King

Air King E130SH Instrukcja

10 Października 2024
TriStar

TriStar VE-5936 Instrukcja

10 Października 2024
Orbegozo

Orbegozo PW 1321 Instrukcja

10 Października 2024
Thermex

Thermex Silent 100 CZ Instrukcja

9 Października 2024
Imarflex

Imarflex IF-375BU Instrukcja

9 Października 2024
Imarflex

Imarflex IF-365BK Instrukcja

9 Października 2024
Solis

Solis Charge & Go Fan 7586 Instrukcja

9 Października 2024
Kogan

Kogan KARCDCFANLA Instrukcja

9 Października 2024
Westinghouse

Westinghouse 72206 Instrukcja

9 Października 2024
Westinghouse

Westinghouse 78425 Instrukcja

9 Października 2024