Instrukcja obsługi Whirlpool WUI75X15HW

Whirlpool Maszyna do lodu WUI75X15HW

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Whirlpool WUI75X15HW (26 stron) w kategorii Maszyna do lodu. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/26

How Your Ice Maker Works

When you rst start your ice maker, the water pan will ll and the

system will rinse itself before starting to make ice. The rinsing process

takes about 5 minutes.

Under normal operating conditions, the ice maker will cycle at preset

temperatures. The ice level sensor located in the ice storage bin will

monitor the ice levels.

IMPORTANT: If the water supply to the ice maker is turned off, be

sure to set the ice maker control to OFF.

The Ice Making Process

1. Water is constantly circulated over a freezing plate. As the water

freezes into ice, the minerals in the water are rejected. This

produces a sheet of ice with a low mineral content.

User Guide

Ice Maker

LEARN MORE

In an effort to conser e ma a cove natural resource ths, is ic ker incl es ud ndensed User Guide. A complete User Guide can

be downloaded at www.whirlpool.com/manuals. The mode number l is located on e inth side of th e mae ic ker.

In e th U.S.A., register your ice maker at www.w .comhirlpool .

In da register ur Cana , yo ice maker at www.whirlpool.ca.

Para a instun version de estas rucciones en español, visite www.whirlpool.com.

You can be killed or seriously injured if you don’t immediately f .ollow instructions

You ca be killed or seriously injured if u don’t llow instructions.n yo fo

All sa ty messages will tell you what the potential hazard is, tell you how to reduce the chance of injur and tell you what can happen if thefe y,

inst ctions are not llowed.ru fo

Your safety and the safety of othe are very important.rs

We ha provided ma impove ny rtant sa ty messages in this manual and on your appliancfe e. Al ys read and obey all sa ty messagewa fe s.

This is the sa ty alert symbol.fe

This symbol alerts you to potential hazards that can kill or hurt you and others.

All sa ty messages will ll the sa ty aler “DANGER” or “WARNINGfe fo ow fe t symbol and either the word .”

These words mean:

DANGER

WARNING

IMPORTANT SAFETY INSTRUCTIONS

WARN G IN : To reduce the risk of fire, electric shock, or injury when using your ice maker, follow these basic

precautions:

SAVE THESE INSTRUCTIONS

P glug into a rounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do ot se an extension cord.n u

Disconnect power before cleaning.

Disconnect power before servicing.

Replace al nelsl parts and pa before operating.

Use two or more people to move and install ice maker.

Stat of alifornia Propositio 65 rnings:e C n Wa

WARNING This produc contains one or more hemical kn to th Stat of California to cause cancer.: t c s own e e

WARNING This produc contains one or more hemical kn to th Stat of California to cause bi de ct or othe reproductiv ha .: t c s own e e rth fe s r e rm

OPERATING YOUR ICE MAKER

W11256912A

2. When the desired thickness is reached, the ice sheet is released

and slides onto a cutter grid. The grid divides the sheet into

individual cubes.

3. The water containing the rejected minerals is drained after each

freezing cycle.

4. Fresh water enters the machine for the next ice making cycle.

5. Cubes fall into the storage bin. When the bin is full, the ice maker

shuts off automatically and restarts when more ice is needed. The

ice bin is not refrigerated, and some melting will occur. The

amount of melting varies with room temperature.

NOTE: As the room and water temperatures vary, so will the amount

of ice produced and stored. This means that higher operating

temperatures result in reduced ice production.

Using the Controls

1. To start ice production, press ON/OFF.

2. To stop ice maker operation, press ON/OFF.

NOTES:

■

Pressing the ON/OFF button does not shut off power to the ice

maker.

■

Allow 24 hours to produce the rst batch of ice. Discard the rst 2

batches produced.

FAST ICE Mode

Select the FAST ICE feature when you have an upcoming need for a

large amount of ice and the ice bin is low or empty. FAST ICE mode

will produce a greater quantity of ice in a 24-hour period.

■

Press FAST ICE while the ice maker is on. The indicator light will

illuminate.

■

Press FAST ICE again to turn off the FAST ICE feature. The

indicator light will turn off.

■

The FAST ICE mode will be on when you rst turn on the product.

It will turn off after 24 hours. To turn FAST ICE back on,

press FAST ICE.

Clean

It is recommended that you clean the ice maker when the “Cleaning

Needed” light is illuminated or 9 months has elapsed, or ice

production decreases signicantly. To clean your ice maker, see

“Ice Maker System” in the “Cleaning” section.

Door Ajar Alarm

The Door Ajar Alarm feature sounds an alarm when the ice maker

door is open for 5 minutes. The alarm will repeat every 2 minutes.

Close the door to turn off. The feature then resets and will reactivate

when the door is left open again for 5 minutes.

Water Filtration System

Installing a Water Filter

1. Purchase a Whirlpool approved water lter.

2. Take the water lter out of its packaging and remove the cover

from the O-rings. Be sure the O-rings are still in place after the

cover is removed.

3. The water lter compartment is located in the right-hand side of

the ice maker controls.

4. Using the arrow pointing to the alignment pin on the side of the

lter and the arrow inside the control housing, align the alignment

pin with the cutout notch and insert the lter into the housing.

Do not use with ter that is microbiologically unsa or wa fe

of unknown quality without adequate disin ction before fe

or after the system. Systems certified r cyst reduction fo

may be used on disinfected ters that may contain wa

filterable cysts.

A B C D

A. Cover

B. O-rings

C. Alignment pin

D. Alignment arrow

A. Alignment pin

B. Unlocked symbol

C. Locked symbol

D. Cutout notch inside control housing

E. Arrow pointing to cutout notch

F. Arrow pointing to alignment pin

5. Turn the lter clockwise until it locks into the housing. Ensure

that the alignment arrow on the lter head aligns with the locked

symbol on the control box housing.

NOTE: If the lter is not correctly locked into the housing, the ice

maker will not produce ice.

The Water Filter Status Light

The water lter status lights will help you know when to change your

water lter.

■The “Order Filter” status light will be illuminated when it is time to

order a replacement lter.

■The “Replace Filter” status light will be illuminated when it is time

to replace the lter.

■Replacing the disposable water lter with a new lter will

automatically reset the lter status tracking feature. See “Using

the Controls.”

Replace the Water Filter

To purchase a replacement water lter, see “Accessories.”

Replace the disposable water lter when indicated on the water

lter status display or at least every 9 months. If the ice making rate

decreases before the Replace Filter light illuminates, then replace the

lter.

1. Locate the water lter compartment in the right-hand side of the

control housing. See Step 3 in the “Install Water Filter” section.

2. Turn the water lter counterclockwise (to the left), and pull it

straight out of the compartment.

NOTE: There may be some water in the lter. Some spilling may

occur.

3. Install the replacement water lter by following steps 2 through 5

in the “Install the Water Filter” section.

Normal Sounds

Your new ice maker may make sounds that are not familiar to you.

Because the sounds are new to you, you might be concerned about

them. Most of the new sounds are normal. Hard surfaces such as

oors, walls and cabinets can make the sounds seem louder than

they actually are. The following describes the kinds of sounds that

might be new to you and what may be making them.

■

You will hear a buzzing sound when the water valve opens to ll

the water pan for each cycle.

■

Rattling noises may come from the ow of the refrigerant or the

water line. Items stored on top of the ice maker can also make

noises.

■

The high-efciency compressor may make a pulsating or high

pitched sound.

■

Water running over the evaporator plate may make a splashing

sound.

■

Water running from the evaporator plate to the water pan may

make a splashing sound.

■

As each cycle ends, you may hear a gurgling sound due to the

refrigerant owing in your ice maker.

■

You may hear air being forced over the condenser by the

condenser fan.

■During the harvest cycle, you may hear a “thud” when the ice

sheet slides from the evaporator onto the cutter grid.

■

When you rst start the ice maker, you may hear water running

continuously. The ice maker is programmed to run a rinse cycle

before it begins to make ice.

■

If the ice maker is connected to a water supply pressure in excess

of 60 psi, you may hear a loud sound during water lling

associated with the ow of water through the inlet valve. Call a

licensed, qualied plumber to determine the best method to

reduce the supply water pressure (50 psi is recommended).

Cleaning

The ice making system and the air-cooled condenser need to be

cleaned regularly for the ice maker to operate at peak efciency and

to avoid premature failure of system components. See the “Ice Maker

System” and the “Condenser” sections.

Exterior Surfaces

Wash the exterior surfaces and gaskets with warm water and mild

soap or detergent. Wipe and dry. We recommend using a clean micro

ber cloth or a soft clean cloth to polish and dry.

For products with a painted or colored exterior, regular use of a good

household appliance cleaner and polish will help protect the nish.

Using paper towels may scratch and/or dull the clear coat of the

painted door.

For products with a ngerprint resistant stainless steel exterior, do

not use soap-lled scouring pads, abrasive or harsh cleaners, any

cleaning product containing chlorine bleach, steel-wool pads, gritty

wash cloths or paper towels. Using these types of products may

scratch and/or dull the clear coat of the ngerprint resistant stainless

steel door.

Ice Maker System

Minerals that are removed from water during the freezing cycle will

eventually form a hard scaly deposit in the water system. Cleaning the

system regularly helps remove the mineral scale buildup. How often

you need to clean the system depends upon how hard your water is.

With hard water of 15 to 20 grains/gal. (4 to 5 grains/liter), you may

need to clean the system as often as every 9 months.

NOTE: Use one 16 oz (473 mL) bottle of approved ice maker cleaner.

To order, see “Accessories.”

1. Press the ON/OFF button.

2. Wait 5 to 10 minutes for the ice to fall into the storage bin.

Remove all ice from the storage bin.

3. Unscrew the drain cap from the bottom of the water pan located

inside the storage bin as shown. Allow the water to drain

completely.

A. Alignment arrow aligned with locked symbol

CARING FOR YOUR ICE MAKER

Specyfikacje produktu

Marka:	Whirlpool
Kategoria:	Maszyna do lodu
Model:	WUI75X15HW

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Whirlpool WUI75X15HW, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Maszyna do lodu Whirlpool

Whirlpool GI15NDXZ Instrukcja

3 Września 2024

Whirlpool WUI95X15HZ Instrukcja

26 Sierpnia 2024

Whirlpool GI15PDXZ Instrukcja

21 Sierpnia 2024

Whirlpool WUI75X15HW Instrukcja

3 Lipca 2024

Instrukcje Maszyna do lodu

Najnowsze instrukcje dla Maszyna do lodu

Spaceman 6250 Instrukcja

12 Stycznia 2025

Beper 70257 Instrukcja

11 Stycznia 2025

U-Line U-3018CLRINT-00B Instrukcja

11 Stycznia 2025

Koenic KIM 91221 B Instrukcja

11 Stycznia 2025

Eldom Cube KS200 Instrukcja

11 Stycznia 2025

Eldom Cristall KS210 Instrukcja

11 Stycznia 2025

Edgestar IB250SSOD Instrukcja

10 Stycznia 2025

Edgestar IB121SS Instrukcja

10 Stycznia 2025

Edgestar IB250BL Instrukcja

10 Stycznia 2025

Summit BIM182 Instrukcja

9 Stycznia 2025