Instrukcja obsługi Whirlpool AKR 703 IX

Whirlpool Okap wyciągowy AKR 703 IX

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Whirlpool AKR 703 IX (4 stron) w kategorii Okap wyciągowy. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/4

5019 318 33292

SAFEGUARDING THE ENVIRONMENT

1. Packing

Packing materials are 100% recyclable and are marked with the

recycling symbol .Comply with the local regulations for

disposal. The packing materials (plastic bags, polystyrene, etc.)

are a potential source of danger and must be kept out of the

reach of children.

2. Product

This appliance is marked in compliance with European Directive

2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).

By ensuring that this appliance is correctly scrapped, the user can

help prevent potentially harmful consequences for the

environment and the health of people.

The symbol on the product or the accompanying

documentation indicates that this product should not be treated

as domestic waste but must be taken to a suitable collection

centre for the recycling of electrical and electronic equipment.

Disposal must be carried out in compliance with local regulations

on waste disposal.

For further information on the treatment, recovery and recycling

of this product, contact the competent local office, the

household waste collection service or the shop where you

purchased the appliance.

IMPORTANT INSTRUCTIONS FOR

SAFETY

WARNING: To reduce the risk of accidents, electric shock,

injury or damage, when using the hood comply with the basic

precautions, including the following.

1. Always disconnect the hood from the power supply before

carrying out any installation or maintenance operation on the

appliance.

2. Installation must be carried out by a specialised technician, in

compliance with the manufacturer’s instructions and local

safety regulations.

3. Earthing of the appliance is compulsory. (Not possible for

Class II hoods).

4. Never use multisockets and extension leads.

5. The electrical components must no longer be accessible to

the user after installation.

6. Do not touch the hood with wet parts of the body or use it

when barefoot.

7. Do not pull the appliance power cable to unplug it.

8. After-sales service – do not repair or replace any part of the

hood unless specifically indicated in the manual. All other

maintenance services must be carried out by a specialised

technician.

9. When drilling the wall, make sure not to damage the

electrical connections and/or pipes.

10. The ventilation ducts must always discharge to the outside.

11. The Manufacturer declines any liability for improper use or

incorrect setting of the controls.

12. The appliance is not intended for use by children or persons

with limited physical, sensory or mental abilities or without

experience and knowledge of it, unless they are under the

supervision of or instructed in its use by a person responsible

for their safety.

13. Keep children away.

14. To reduce the risk of fire, only use a metal inlet duct.

15. Children must be supervised so that they do not play with

the appliance.

16. The product must be disposed of in compliance with local

regulations on waste disposal.

17. For further information on the treatment, recovery and

recycling of this product, contact the competent local office,

the household waste collection service or the shop where

you purchased the appliance.

18. Regular cleaning and maintenance is essential for correct

hood operation and good performance. Frequently clean all

encrustations from dirty surfaces to prevent the

accumulation of grease. Regularly clean or replace filters.

19. Do not “flambé” food under the hood. Naked flames could

cause a fire.

20. The room must have adequate ventilation when the hood is

used at the same time as appliances operating on gas or

other fuels.

21. The discharge air must not be eliminated in a duct used to

remove fumes produced by appliances operating on gas or

other fuels, but must have a separate outlet. All the national

regulations on air discharge envisaged by art. 7.12.1 of CEI

EN 60335-2-31 must be observed.

22. If the hood is used together with other appliances operating

on gas or other fuels, the negative pressure in the room

must not exceed 4 Pa (4 x 10-5 bar). Therefore, make sure

the room is adequately ventilated.

23. Do not leave pans unattended when frying, since the cooking

oil could catch fire.

24. Make sure the lamps are cold before touching them.

25. The hood is not a shelf, therefore do not overload or place

objects on it.

26. Do not use or leave the hood without its lamps correctly

installed - risk of electric shock.

27. Wear work gloves for all installation and maintenance

operations.

28. The product is not suitable for outdoor use.

29. The air sucked by the hood must not be eliminated through

the same flue of the heating system or other appliances using

gas or other fuels.

IF E PNLGBD GR

5019 318 33292

Electrical connection

The mains voltage must match that given on the rating plate

located inside the hood. If provided with a plug, connect the

hood to a socket complying with the current regulations and

located in an accessible area. If it does not have a plug (direct

connection to the power supply) or if the plug is not in an

accessible place, fit a suitable double-pole switch that ensures

complete disconnection from the power supply in category III

overvoltage conditions, complying with the installation rules.

WARNING: Before reconnecting the hood circuit to the

power supply and checking correct operation, always make sure

the power cable is correctly fitted and that it was NOT crushed

in its housing during installation. Make sure to have this operation

carried out by a specialised technician.

Cleaning the hood

WARNING! Failure to remove oil/grease (at least once a

month) could result in fire.

Use a soft cloth with a neutral detergent. Never use abrasive

substances or alcohol.

Before using the hood

Please read these instructions carefully and keep them for future

reference, in order to ensure best use of your hood.

The packing materials (plastic bags, polystyrene, etc.) are a

potential source of danger and must be kept out of the reach of

children.

Make sure the hood has not been damaged during transport.

Declaration of conformity

This product has been designed, manufactured and put on the

market in conformity with:

- safety objectives of the “Low Voltage” Directive 2006/95/EC

(which replaces 73/23/EEC as amended)

- protection requirements of “EMC” Directive 89/336/EEC

amended by Directive 93/68/EEC.

Troubleshooting guide

If the hood does not work:

• Is the plug properly inserted in the power socket?

• Is there a power failure?

If the hood is not extracting enough:

• Is the right speed selected?

• Do the filters need cleaning or replacing?

• Are the air outlets blocked?

If the lamp does not work:

• Does the lamp need replacing?

• Is the lamp correctly fitted?

AFTER-SALES SERVICE

Before calling the After-Sales Service

1. Check to see if you can fix the problem yourself (see

“Troubleshooting Guide”).

2. Switch the appliance off and then on again to check if the

problem has been eliminated.

3. If the problem persists, contact the After-Sales Service.

Specify:

• the type of fault,

• the product model given on the dataplate inside the hood,

visible on removing the grease filters,

• your full address,

• your telephone number and area code,

• the Service code (the number under the word SERVICE on

the dataplate inside the hood, behind the grease filter).

If any repairs are necessary, contact an authorised Service Centre

(to ensure the use of original spare parts and correct repair).

Failure to comply with these instructions can compromise the

safety and quality of the product.

IF E PNLGBD GR

5019 318 33292

The hood is designed for use in “Extractor version” or in “Filter version”.

Extractor Version

Fumes are extracted and expelled to the outside through an exhaust pipe (not supplied) fixed to the hood exhaust pipe

connector (Fig.d, Fig.e).

Depending on the exhaust pipe purchased, provide for suitable fixing to the exhaust pipe connector.

Important: If already installed, remove the carbon filter/s.

Filter Version

Air is filtered through the carbon filter/s and recycled into the surrounding environment.

Important: check that air recirculation is facilitated (to this end, carefully follow the instructions given in the installation

handbook)

Important! If the hood does not have a carbon filter/s, it/they must be ordered and fitted before use.

Preliminary information for installing the hood:

Expansion plugs are provided to secure the hood to most types of ceilings. However, a qualified technician is needed to make

sure that the plugs are suitable for your ceiling. The wall/ceiling must be strong enough to take the weight of the hood. Remove

the grease filters

Pre-assembly of the electrical connection box:

(a.) remove the screws and washers on the extractor unit and remove the adhesive tape fixing the box to the extractor unit,

(b.) position the electrical connection box above the extractor unit, (c.) secure with 2 Ø 3.5 x 9.5 screws and 2

Ø 14 x 12 washers (previously removed).

1. Using a pencil, draw the centre line on the wall up to the ceiling (Fig.1).

2. If necessary, cut the drilling template according to the width of the hood.

3. Apply the drilling template to the wall: the vertical centre line printed on the drilling template must match the centre line

drawn on the wall and, depending on the height of the hood, the lower horizontal edge of the drilling template must match

the lower edge of the hood.

4. Drill as shown on the template, insert the wall plugs and screw in the top 2 screws, leaving a space of approx. 1 cm

between the screw head and the wall.

Note: Drill all the holes indicated on the template: the top 2 holes are for hanging the hood and the bottom holes are for

fixing it securely to the wall.

5. Fit the flue support bracket “G” (Fig.1) to the wall and against the ceiling. Use the support bracket as drilling template (if

present, the small slot on the support must match the line drawn on the wall) and mark 2 holes with the pencil, drill the

holes and finally insert 2 plugs.

6. Fix the flue support bracket to the wall with 2 screws.

7. Remove the drilling template from the wall and hang the hood on the 2 top screws (Fig.1).

8. Screw in the bottom screws (and washers!) to fix the hood securely in place (COMPULSORY!!).

After checking the alignment of the hood, TIGHTEN ALL THE SCREWS - top and bottom.

Note: the bottom fixing points are visible upon removal of the grease filters.

9. Connect an exhaust pipe to the exhaust pipe connector located above the extraction motor unit.

For extractor operation, connect the other end of the exhaust pipe to the home discharge device.

For filter operation, fix the deflector F to the flue support bracket and connect the other end of the exhaust pipe to the G

deflector collar F (Fig.1).

10. Make all necessary electrical connections.

11. Fit the flues over the extractor unit, engaging them in their seat above the hood.

12. Slide the top section of the flue upwards and secure it with 2 screws (11a) to the flue support bracket “G” (11b).

Refit the grease filters and check for correct hood operation.

IF E PNLGBD GR

Specyfikacje produktu

Marka:	Whirlpool
Kategoria:	Okap wyciągowy
Model:	AKR 703 IX

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Whirlpool AKR 703 IX, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Okap wyciągowy Whirlpool

Whirlpool AKR 429 WH Instrukcja

8 Października 2024

Whirlpool AKR 635 WH-1 Instrukcja

8 Października 2024

Whirlpool WHVS 93F LT BSS/1 Instrukcja

7 Października 2024

Whirlpool AKR 754/1 L IX Instrukcja

6 Października 2024

Whirlpool WVI51UC0LS Instrukcja

6 Października 2024

Whirlpool AKR 635 GY-2 Instrukcja

5 Października 2024

Whirlpool AKR 948 Instrukcja

4 Października 2024

Whirlpool AKR 902 Instrukcja

4 Października 2024

Whirlpool HOO 401 Instrukcja

2 Października 2024

Whirlpool AKR 673 IX-1 Instrukcja

29 Września 2024

Instrukcje Okap wyciągowy

Najnowsze instrukcje dla Okap wyciągowy

Pelgrim ISW990 Instrukcja

15 Października 2024

PKM 6080X Instrukcja

15 Października 2024

M-System MSPK 761 IX Instrukcja

15 Października 2024

Pelgrim ISWA991RVS Instrukcja

15 Października 2024

Pelgrim ISW751RVS Instrukcja

15 Października 2024

Pelgrim ISW771RVS Instrukcja

15 Października 2024

Amana WVW53UC6HV Instrukcja

15 Października 2024

Haier HPH60IMB2 Instrukcja

15 Października 2024

Haier HC60BMB2 Instrukcja

15 Października 2024

Haier HPH90IMB2 Instrukcja

15 Października 2024