Instrukcja obsługi Wells MOD100

Wells Płyta rozgrzewająca MOD100

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Wells MOD100 (16 stron) w kategorii Płyta rozgrzewająca. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/16

WELLS MANUFACTURING

10 Sunnen Dr., St. Louis, MO 63143

telephone: 314-678-6314

fax: 314-781-2714

www.wellsbloomfield.com

IMPORTANT: DO NOT DISCARD THIS MANUAL

This manual is considered to be part of the appliance and is to be given to the OWNER or

MANAGER of the restaurant, or to the person responsible for TRAINING OPERATORS of

this appliance. Additional manuals are available from your WELLS DEALER.

THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR

INSTALLING THIS APPLIANCE. Contact your WELLS DEALER if you have any

questions concerning installation, operation or maintenance of this equipment.

OWNERS MANUAL

BUILT-IN

SINGLE-WELL

MODULAR

WARMERS

with

INFINITE SWITCH

CONTROL

MODELS

MOD100

MOD100D

Includes

INSTALLATION

USE & CARE

EXPLODED VIEW

PARTS LIST

WIRING DIAGRAM

012C

p/n 2M-308029 Rev. (-) M012C.01 110124

MOD-100

Unless otherwise specified, all commercial cooking

equipment manufactured by WELLS MANUFACTURING is

warranted against defects in materials and workmanship for

a period of one year from the date of original installation or

18 months from the date of shipment from our factory,

whichever comes first, and is for the benefit of the original

purchaser only.

THIS WARRANTY IS THE COMPLETE AND ONLY

WARRANTY, EXPRESSED OR IMPLIED IN LAW OR IN

FACT, INCLUDING BUT NOT LIMITED TO, WARRANTIES

OF MERCHANTABILITY OR FITNESS FOR ANY

PARTICULAR PURPOSE, AND/OR FOR DIRECT,

INDIRECT OR CONSEQUENTIAL DAMAGES IN CONNEC-

TION WITH WELLS MANUFACTURING PRODUCTS.

This warranty is void if it is determined that, upon inspection

by an authorized service agency, the equipment has been

modified, misused, misapplied, improperly installed, or dam-

aged in transit or by fire, flood or act of God. It also does not

apply if the serial nameplate has been removed, or if service

is performed by unauthorized personnel. The prices charged

by Wells Manufacturing for its products are based upon the

limitations in this warranty. Seller’s obligation under this

warranty is limited to the repair of defects without charge by

a Wells Manufacturing factory authorized service agency or

one of its sub-service agencies. This service will be provid-

ed on customer’s premises for non-portable models. Porta-

ble models (a device with a cord and plug) must be taken or

shipped to the closest authorized service agency, transpor-

tation charges prepaid, for service. In addition to restrictions

contained in this warranty, specific limitations are shown in

the Service Policy and Procedure Guide. Wells Manufactur-

ing authorized service agencies are located in principal cit-

ies. This warranty is valid in the United States and Canada

and void elsewhere. Please consult your classified tele-

phone directory, your foodservice equipment dealer or con-

tact:

Wells Manufacturing

10 Sunnen Dr., St. Louis MO 63143 USA

phone (314) 781-2777 or fax (314) 781-2714

for information and other details concerning warranty.

LIMITED WARRANTY STATEMENT

SERVICE POLICY AND PROCEDURE GUIDE and ADDITIONAL WARRANTY EXCLUSIONS

NOTE: For your protection, please note that equipment in

this shipment was carefully inspected and packaged by

skilled personnel before leaving the factory. Upon

acceptance of this shipment, the transportation company

assumes full responsibility for its safe delivery.

IF SHIPMENT ARRIVES DAMAGED:

1. VISIBLE LOSS OR DAMAGE: Be certain that any

visible loss or damage is noted on the freight bill or

express receipt, and that the note of loss or damage is

signed by the delivery person.

2. FILE CLAIM FOR DAMAGE IMMEDIATELY:

Regardless of the extent of the damage.

3. CONCEALED LOSS OR DAMAGE: if damage is

unnoticed until the merchandise is unpacked, notify the

transportation company or carrier immediately, and file

“CONCEALED DAMAGE” claim with them. This

should be done within fifteen (15) days from the date

the delivery was made to you. Be sure to retain the

container for inspection.

Wells Manufacturing cannot assume liability for damage or

loss incurred in transit. We will, however, at your request,

supply you with the necessary documents to support your

claim.

SHIPPING DAMAGE CLAIM PROCEDURE

1. Resetting of safety thermostats, circuit breakers, over

load protectors, and/or fuse replacements are not

covered by this warranty unless warranted conditions

are the cause.

2. All problems due to operation at voltages or phase

other than specified on equipment nameplates are

not covered by this warranty.

Conversion to correct voltage and/or phase must be

the customer’s responsibility.

3. All problems due to electrical connections not made

in accordance with electrical code requirements

and wiring diagrams supplied with the equipment are

not covered by this warranty.

4. Replacement of items subject to normal wear, to

include such items as knobs, light bulbs; and, normal

maintenance functions including adjustments of

thermostats, adjustment of micro switches and

replacement of fuses and indicating lights are not

covered by warranty.

5. Damage to electrical cords and/or plug due to exposure

to excessive heat are not covered by this warranty.

6. Full use, care, and maintenance instructions supplied

with each machine. Noted maintenance and

preventative maintenance items, such as servicing and

cleaning schedules, are customer responsibility. Those

miscellaneous adjustments noted are customer

responsibility. Proper attention to preventative

maintenance and scheduled maintenance procedures

will prolong the life of the appliance.

7. Travel mileage is limited to sixty (60) miles from an

Authorized Service Agency or one of its sub-service

agencies.

8. All labor shall be performed during regular working

hours. Overtime premium will be charged to the buyer.

9. All genuine Wells replacement parts are warranted for

ninety (90) days from date of purchase on non-

warranty equipment. This parts warranty is limited only

to replacement of the defective part(s). Any use of

non-genuine Wells parts completely voids any

warranty.

10. Installation, labor, and job check-outs are not

considered warranty and are thus not covered by this

warranty.

11. Charges incurred by delays, waiting time or operating

restrictions that hinder the service technician’s ability to

perform service are not covered by warranty. This

includes institutional and correctional facilities.

M012C.01 2M-308029 Owners Manual for Single-Well Inf.Sw. MOD-Warmers

WARRANTY xi

FEATURES & OPERATING CONTROLS 2

PRECAUTIONS & GENERAL INFORMATION 3

AGENCY LISTING INFORMATION 3

INSTALLATION 4

OPERATION 6

MAINTENANCE INSTRUCTIONS 7

CLEANING INSTRUCTIONS 8

TROUBLESHOOTING SUGGESTIONS 10

WIRING DIAGRAM 10

EXPLODED VIEW & PARTS LIST 11

PARTS & SERVICE 12

CUSTOMER SERVICE DATA 13

Thank You for purchasing this Wells Manufacturing appliance.

Proper installation, professional operation and consistent maintenance of this appliance will ensure that it

gives you the very best performance and a long, economical service life.

This manual contains the information needed to properly install this appliance, and to use and care for the

appliance in a manner which will ensure its optimum performance.

TABLE OF CONTENTS

INTRODUCTION

M012C.01 2M-308029 Owners Manual for Single-Well Inf.Sw. MOD-Warmers

SPECIFICATIONS

MODEL VOLTS AMPS WATTS POWER SUPPLY CORD

MOD-100

MOD-100D,

MOD1006

120 VAC 1ø 10.0A 1200W

NOT PROVIDED 208 VAC 1ø 4.3A 900W

240 VAC 1ø 5.0A 1200W

Specyfikacje produktu

Marka:	Wells
Kategoria:	Płyta rozgrzewająca
Model:	MOD100

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Wells MOD100, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Płyta rozgrzewająca Wells

Wells SS8TD Instrukcja

17 Września 2024

Wells SS206 Instrukcja

16 Września 2024

Wells SS206TU Instrukcja

15 Września 2024

Wells MOD100 Instrukcja

14 Września 2024

Wells SS10T Instrukcja

14 Września 2024

Wells BMW206STDL120 Instrukcja

13 Września 2024

Wells SS206ERD Instrukcja

13 Września 2024

Wells SS10TD Instrukcja

13 Września 2024

Wells SS8TDU Instrukcja

10 Września 2024

Wells SS8D Instrukcja

7 Września 2024

Instrukcje Płyta rozgrzewająca

Najnowsze instrukcje dla Płyta rozgrzewająca

Royal Catering RC-SHSFL09 Instrukcja

14 Października 2024

Hendi 238868 Instrukcja

9 Października 2024

Rommelsbacher WPR 307/E Instrukcja

8 Października 2024

Salton ICS2146 Instrukcja

7 Października 2024

Salton TWT30 Instrukcja

7 Października 2024

Salton SMW2094BKW Instrukcja

7 Października 2024

Salton SP2111 Instrukcja

7 Października 2024

Bartscher WP230S-EB 1/1S Instrukcja

7 Października 2024

BEEM Buffet Star 2 in 1 Instrukcja

5 Października 2024

Brentwood BF-215 Instrukcja

4 Października 2024