Instrukcja obsługi Wells G136

Wells Grillplaat G136

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Wells G136 (40 stron) w kategorii Grillplaat. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/40

WELLS MANUFACTURING

10 Sunnen Dr., St. Louis, MO 63143

telephone: 314-678-6314

fax: 314-781-2714

www.wellsbloomfield.com

IMPORTANT: DO NOT DISCARD THIS MANUAL

This manual is considered to be part of the appliance and is to be given to the OWNER or

MANAGER of the restaurant, or to the person responsible for TRAINING OPERATORS of

this appliance. Additional manuals are available from your WELLS DEALER.

THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR

INSTALLING THIS APPLIANCE. Contact your WELLS DEALER if you have any

questions concerning installation, operation or maintenance of this equipment.

OWNERS MANUAL

BUILT-IN

ELECTRIC

GRIDDLES

MODELS

G136, G196,

G236, G246,

G606,

JG246UL

Includes

INSTALLATION

USE & CARE

PARTS LISTS

WIRING DIAGRAMS

111

p/n Rev. D M101 05102M-303340 11

Model G136

Model JG246UL

111 p/n OpManual Built-In Electric Griddles2M-303340

equipment manufactured by Wells Manufacturing is

warranted against defects in materials and workmanship

for a period of one year from the date of original installation

or 18 months from the date of shipment from our factory,

whichever comes rst, and is for the benet of the original

purchaser only.

THIS WARRANTY IS THE COMPLETE AND ONLY

WARRANTY, EXPRESSED OR IMPLIED IN LAW

OR IN FACT, INCLUDING BUT NOT LIMITED TO,

WARRANTIES OF MERCHANTABILITY OR FITNESS

FOR ANY PARTICULAR PURPOSE, AND/OR FOR

DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES

IN CONNECTION WITH WELLS MANUFACTURING

PRODUCTS. This warranty is void if it is determined

that, upon inspection by an authorized service agency,

the equipment has been modied, misused, misapplied,

improperly installed, or damaged in transit or by re, ood or

act of God. It also does not apply if the serial nameplate has

been removed, or if service is performed by unauthorized

its products are based upon the limitations in this warranty.

Seller’s obligation under this warranty is limited to the repair

of defects without charge by a Wells Manufacturing factory

authorized service agency or one of its sub-service agencies.

This service will be provided on customer’s premises for

non-portable models. Portable models (a device with a cord

and plug) must be taken or shipped to the closest authorized

service agency, transportation charges prepaid, for service.

In addition to restrictions contained in this warranty, specic

limitations are shown in the Service Policy and Procedure

Guide. Wells Manufacturing authorized service agencies are

located in principal cities. This warranty is valid in the United

States and Canada and void elsewhere. Please consult your

classied telephone directory, your foodservice equipment

dealer or contact:

Wells Manufacturing

10 Sunnen Dr., St. Louis MO 63143 USA

phone (314) 678-6314 or fax (314) 781-2714

for information and other details concerning warranty.

LIMITED WARRANTY STATEMENT

SERVICE POLICY AND PROCEDURE GUIDE and ADDITIONAL WARRANTY EXCLUSIONS

NOTE: For your protection, please note that equipment

in this shipment was carefully inspected and packaged

by skilled personnel before leaving the factory. Upon

acceptance of this shipment, the transportation company

assumes full responsibility for its safe delivery.

IF SHIPMENT ARRIVES DAMAGED:

1. Be certain that any VISIBLE LOSS OR DAMAGE:

visible loss or damage is noted on the freight bill or

express receipt, and that the note of loss or damage is

signed by the delivery person.

2. FILE CLAIM FOR DAMAGE IMMEDIATELY:

Regardless of the extent of the damage.

3. if damage isCONCEALED LOSS OR DAMAGE:

unnoticed until the merchandise is unpacked, notify the

transportation company or carrier immediately, and

le “CONCEALED DAMAGE” claim with them. This

should be done within fteen (15) days from the date

the delivery was made to you. Be sure to retain the

container for inspection.

Wells Manufacturing cannot assume liability for damage or

loss incurred in transit. We will, however, at your request,

supply you with the necessary documents to support your

claim.

SHIPPING DAMAGE CLAIM PROCEDURE

1. Resetting of safety thermostats, circuit breakers, over

load protectors, and/or fuse replacements are not

covered by this warranty unless warranted conditions

are the cause.

2. All problems due to operation at voltages or phase

other than specied on equipment nameplates are

not covered by this warranty.

Conversion to correct voltage and/or phase must be

the customer’s responsibility.

3. All problems due to electrical connections not made

in accordance with electrical code requirements

and wiring diagrams supplied with the equipment are

not covered by this warranty.

4. Replacement of items subject to normal wear, to

include such items as knobs, light bulbs; and, normal

maintenance functions including adjustments of

thermostats, adjustment of micro switches and

replacement of fuses and indicating lights are not

covered by warranty.

5. Damage to electrical cords and/or plug due to exposure

to excessive heat are covered by this warranty.not

6. Full use, care, and maintenance instructions supplied

with each machine. Noted maintenance and

preventative maintenance items, such as servicing and

cleaning schedules, are customer responsibility.

Those miscellaneous adjustments noted are customer

responsibility. Proper attention to preventative

maintenance and scheduled maintenance procedures

will prolong the life of the appliance.

7. Travel mileage is limited to from an sixty (60) miles

Authorized Service Agency or one of its sub-service

agencies.

8. All labor shall be performed during regular working

hours. Overtime premium will be charged to the buyer.

9. All genuine Wells replacement parts are warranted

for ninety (90) days from date of purchase on non-

warranty equipment. This parts warranty is limited only

to replacement of the defective part(s). use of Any

non-genuine voids any Wells parts completely

warranty.

10. Installation, labor, and job check-outs are not

considered warranty and are thus covered by this not

warranty.

11. Charges incurred by delays, waiting time or operating

restrictions that hinder the service technician’s ability to

perform service are covered by warranty. This not

includes institutional and correctional facilities.

111 p/n OpManual Built-In Electric Griddles2M-303340

WARRANTY xi

SPECIFICATIONS 1

FEATURES & OPERATING CONTROLS 2

PRECAUTIONS & GENERAL INFORMATION 3

AGENCY LISTING INFORMATION 4

INSTALLATION 4

OPERATION 6

CLEANING INSTRUCTIONS

Standard and GroovedGriddles 8

Chrome-Plated griddles 9

TROUBLESHOOTING SUGGESTIONS 10

EXPLODED VIEWS 11-25

WIRING DIAGRAMS 26-33

PARTS & SERVICE 37

CUSTOMER SERVICE DATA 37

Proper installation, professional operation and consistent maintenance of this appliance will ensure that it

gives you the very best performance and a long, economical service life.

This manual contains the information needed to properly install this appliance, and to use and care for the

appliance in a manner which will ensure its optimum performance.

TABLE OF CONTENTS

SPECIFICATIONS - STANDARD GRIDDLES

INTRODUCTION

MODEL VOLTS WATTS

AMPS 3ø AMPS

L1 L2 L3 N 1ø

PG / G136

208/240V 6,750 / 9,000 14.0 / 18.7 28.1 / 32.5 14.0 / 18.7 32.5 / 37.5

380/415 10,800 15.0 15.0 15.0 -

480 9,000 9.4 16.2 9.4 18.7

G136EU 380-415V 10,800 15 15 15 0

PG / G196

208V 12,000 28.8 49.9 28.8 57.6

240V 12,000 25 43.3 25 50

480V 12,000 12.5 21.7 12.5 25

G196EU 380-415V 16,100 22.5 22.5 225 0

PG / G236

208V 16,000 48.3 51.3 35 76.9

240V 16,000 41.7 44.4 30.4 66.6

480V 16,000 20.9 22.2 15.5 33.3

G236EU 380-415V 16,000 15.8 31.6 19.2 38.6

PG / G246

208V 21,500 63.4 67.1 45.8 103.3

240V 21,500 55 58.3 39.6 89.5

480V 21,500 27.1 28.9 19.9 43.8

G246EU 380-415V 21,000 20.8 41.7 25 50.6

PG / G606

208V 32,000 48.3 51.3 35 76.9 x 2

240V 32,000 41.7 44.4 30.4 66.6 x 2

480V 32,000 20.9 22 15.1 33.3 x 2

Specyfikacje produktu

Marka:	Wells
Kategoria:	Grillplaat
Model:	G136

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Wells G136, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Grillplaat Wells

Wells HDTG4830G Instrukcja

13 Września 2024

Wells HDCB1230G Instrukcja

13 Września 2024

Wells G246 Instrukcja

12 Września 2024

Wells G24 Instrukcja

9 Września 2024

Wells G136 Instrukcja

8 Września 2024

Wells HDTG3630G Instrukcja

7 Września 2024

Wells G60 Instrukcja

7 Września 2024

Wells HDTG2430G Instrukcja

7 Września 2024

Wells B44 Instrukcja

6 Września 2024

Wells HDCB4830G Instrukcja

5 Września 2024

Instrukcje Grillplaat

Najnowsze instrukcje dla Grillplaat

Cuisinart GR-4N Instrukcja

19 Września 2024

WestBend 76220 Instrukcja

18 Września 2024

DCG BQ2496N Instrukcja

18 Września 2024

Estella DPC18T Instrukcja

18 Września 2024

CombiSteel 7178.0230 Instrukcja

17 Września 2024

Lagrange Plancha Pro Instrukcja

17 Września 2024

MilanToast 420084 Instrukcja

16 Września 2024

Fusion 010-12831-90 Instrukcja

16 Września 2024

MilanToast 420092 Instrukcja

16 Września 2024

Dyna-Glo DGJ810CSB-D Instrukcja

16 Września 2024