Instrukcja obsługi Webasto BlueCool Connect

Webasto kontrola klimatu BlueCool Connect

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Webasto BlueCool Connect (12 stron) w kategorii kontrola klimatu. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/12
Interface
BlueCool Connect
English
Operating and installation instructions
Table of Contents
2 2510264A OI-II BlueCool Connect_draft12
Table of Contents
1 About this document .......................... 3
1.1 Purpose of this document.......................................... 3
1.2 Using this document..................................................3
1.3 Use of symbols and highlighting ................................ 3
1.4 Warranty and liability................................................. 3
1.5 Used abbreviations .................................................... 3
1.6 Measurements........................................................... 3
2 Safety ................................................. 3
2.1 General...................................................................... 3
2.2 Intended use ............................................................. 3
2.3 Qualifications of installation personnel....................... 3
3 Scope of Delivery ................................ 3
4 Introduction........................................ 4
5 Configuration overview ...................... 4
6 Installation.......................................... 5
6.1 Hardware Installation ................................................5
6.2 Software installation.................................................. 5
7 App navigation ................................... 5
7.1 Start menu BlueCool Connect....................................5
7.2 Settings menu BlueCool Connect...............................6
7.3 Operating a unit ........................................................ 6
7.4 Settings menu BlueCool AC unit ................................ 7
7.5 Creating new groups .................................................7
7.6 Operating a group ..................................................... 8
7.7 Setting the Timer ....................................................... 8
7.8 Adding a new BlueCool Connect ............................... 8
8 Error codes .........................................9
9 Technical data .................................... 9
10 CE-declaration of conformity .............. 9
11 Annex ............................................... 10
About this document | 1
2510264A OI-II BlueCool Connect_draft12 3 / 12
1 About this document
1.1 Purpose of this document
The Operating and Installation Instructions (OI/II) are an integral
part of the product and contain all the information required to
ensure correct and safe operation and installation.
1.2 Using this document
uRead the installation instructions before operating or in-
stalling the unit.
1.3 Use of symbols and highlighting
Sym-
bol
Explanation
Action (one or more steps)
P
What to do before the action
Advisory note/tip for usage
Info in separate document(s)
Risk of property damage
Risk of severe/mortal injury
1.4 Warranty and liability
Webasto shall not assume liability for defects or damage that
are the result of the installation and operating instructions being
disregarded. This liability exclusion particularly applies to:
nInstallation by untrained personnel
nImproper use
nRepairs not carried out by a Webasto service workshop
nUse of non-genuine parts
nConversion of the unit without permission from Webasto
nMechanical damage to the equipment
nNon-compliance with inspection and maintenance instruc-
tions
1.5 Used abbreviations
Abbr. Description
ABYC American Boat and Yacht Council
BCC BlueCool Connect
CAN (bus) Controller Area Network (bus)
LAN Local Area Network
NMEA National Marine Electronics Association
1.6 Measurements
NOTE
All measurements are in mm, unless stated otherwise.
2 Safety
2.1 General
CAUTION
Do not carry out work on a live system.
CAUTION
Be aware that BlueCool Connect (BCC) is remote-con-
trol application; BCC can start remotely units such as
heaters, air conditioner and fans. Make sure you do not
inadvertently start systems, causing danger to people
on board the vessel and damage to the vessel.
2.2 Intended use
The BlueCool Connect is an interface unit between the BlueCool
A/C and its control elements.
2.3 Qualifications of installation
personnel
Installation personnel must be qualified to work on technical
systems.
3 Scope of Delivery
Description Qty
BlueCool Connect Interface box 1
Antenna with a 3m long cable 1
Identification labels 2
Quick Start Guide 1
uUnpack all components and check the delivery for complete-
ness and for damage.


Specyfikacje produktu

Marka: Webasto
Kategoria: kontrola klimatu
Model: BlueCool Connect

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Webasto BlueCool Connect, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje kontrola klimatu Webasto

Instrukcje kontrola klimatu

Najnowsze instrukcje dla kontrola klimatu

Trebs

Trebs Comfortair 99351 Instrukcja

9 Października 2024
Nobo

Nobo NCU-2R Instrukcja

3 Października 2024
Sharp

Sharp FZ40SEF Instrukcja

2 Października 2024
Domo

Domo DO3101 Instrukcja

29 Września 2024
Rittal

Rittal SK 3201.200 Instrukcja

28 Września 2024
Rittal

Rittal SK 3304 Instrukcja

28 Września 2024
Rittal

Rittal SK 3329 Instrukcja

28 Września 2024
Rittal

Rittal SK 3305 Instrukcja

28 Września 2024