Instrukcja obsługi Wavtech linkDQ

Wavtech Konwerter audio/wideo linkDQ

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Wavtech linkDQ (14 stron) w kategorii Konwerter audio/wideo. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/14

WIDTH

PARAMETRIC EQ

BOOST FREQ

NAR WIDE

3 50

(dB)12 (Hz)

30 80

Owner’s Manual

www.wavtech-usa.com

Parametric EQ ŸRLC ReadyAuto Turn-On

2-Channel LOC / Line Driver

• Any function that requires your DO NOT DRIVE WHILE DISTRACTED.

prolonged attention should not be performed while driving. Always stop the

vehicle in a safe location before performing any such function. Failure to do so

may result in an accident.

• KEEP THE VOLUME AT MODERATE LEVELS WHILE DRIVING. Excess

volume levels can obscure sounds such as emergency vehicle sirens or road

warning signals and may result in an accident. Continuous exposure to high

sound pressure levels may cause permanent hearing loss. Use common sense

and practice safe sound.

• FOR USE WITH 12V NEGATIVE GROUND VEHICLE APPLICATIONS ONLY.

Using this product other than in its designed application may result in ﬁre,

injury or product damage.

• MAKE THE CORRECT WIRING CONNECTIONS AND USE PROPER FUSE

PROTECTION. Failure to connect wiring correctly or use appropriate fuse

protection may result in ﬁre, injury or product damage . Ensure proper fusing

of all system power wiring and install a 1-ampere in-line fuse (not included)

with the +12V lead to the unit’s power supply connector.

• DISCONNECT THE NEGATIVE BATTERY TERMINAL BEFORE

INSTALLATION. Failure to do so may result in ﬁre, injury or damage to the

unit.

• D O NOT ALLOW CABLES TO BECOME ENTANGLED IN SURROUNDING

OBJECTS. Arrange wiring and cables to prevent obstructions when driving.

Cables or wiring that obstruct or hang up on places such as steering wheel,

brake pedals, etc. can be extremely hazardous.

• DO NOT DAMAGE VEHICLE SYSTEMS OR WIRING WHEN DRILLING HOLES.

When drilling holes in the chassis for installation, take precautions so as not to

contact, puncture or obstruct brake lines, fuel lines, fuel tanks, electrical

wiring, etc. Failure to take such precautions may result in ﬁre or an accident.

• DO NOT UTILIZE OR CONNECT TO ANY PART OF VEHICLE SAFETY

SYSTEMS. Bolts, nuts or wires used in the brake, airbag, steering or any other

safety-related systems or fuel tanks should NEVER be used for mounting,

power or ground connections. Using such parts may disable control of the

vehicle or result in ﬁre.

WARNING

This symbol means important instructions.

Failure to heed them can result in serious injury or death.

CAUTION This symbol means important instructions.

Failure to heed them can result in injury or property damages.

• STOP USE IMMEDIATELY IF A PROBLEM OCCURS. Failure to do so may

result in personal injury or damage to the product. Return it to your

authorized Wāvtech dealer.

• HAVE AN EXPERT DO THE WIRING AND INSTALLATION. This unit requires

special technical skill and experience for wiring and installation. To insure

safety and proper function, always contact the authorized dealer where you

purchased the product to have it done professionally.

• INSTALL THE UNIT SECURELY WITH SPECIFIED PARTS. Be sure to use only

the included parts and speciﬁed installation accessories (not included). Use of

other than designated parts may damage this unit. Install the unit securely so

that it will not come loose during a collision or sudden jolt.

• ROUTE WIRING AWAY FROM SHARP EDGES AND MOVING PARTS. Arrange

cables and wiring away from sharp or pointed edges and avoid moving parts

such as seat hinges or rails to prevent pinching or wear. Use loom protection

where appropriate and always use a grommet for any wiring routed through

metal.

• NEVER RUN SYSTEM WIRING OUTSIDE OR UNDERNEATH THE VEHICLE.

All wiring must be routed, secured and protected inside the vehicle. Failure to

do so may result in ﬁre, injury or property damage.

• INSTALL THE UNIT IN A DRY AND VENTILATED LOCATION. Avoid

mounting locations where the unit will likely be exposed to high moisture or

heat without adequate ventilation. Moisture penetration or heat buildup may

result in product failure.

• REDUCE GAIN AND SOURCE VOLUME TO MINIMUM LEVELS FOR INITIAL

SYSTEM TUNING AND BEFORE CONNECTION TO AN AMPLIFIER. Ensure

ampliﬁer power is oﬀ before connecting RCA cables and follow proper system

gain setting procedures. Failure to do so may result in damage to the ampliﬁer

and/or connected components.

CAUTION

Package Contents:

Main Unit Terminals

Accessories Required for

Installation :(not included)

Mounting Tabs

(detachable)

ŸRCA Interconnects

Ÿ18AWG Wire

ŸIn-line Fuse Holder w/1A fuse

ŸBattery Ring Terminal

ŸWire Crimp Connectors

ŸGrommets and Loom

ŸCable Ties

ŸMounting Screws

PWR/SPK GND

Specyfikacje produktu

Marka:	Wavtech
Kategoria:	Konwerter audio/wideo
Model:	linkDQ

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Wavtech linkDQ, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Konwerter audio/wideo Wavtech

Wavtech bassFREQ Instrukcja

28 Września 2024

Wavtech LinkD Instrukcja

28 Września 2024

Wavtech Link4 Instrukcja

28 Września 2024

Wavtech Link8 Instrukcja

28 Września 2024

Wavtech link2 Instrukcja

28 Września 2024

Wavtech linkDQ Instrukcja

28 Września 2024

Wavtech link6 Instrukcja

28 Września 2024

Wavtech bassRESTOR Instrukcja

28 Września 2024

Wavtech LinkT Instrukcja

28 Września 2024

Wavtech linkQ Instrukcja

28 Września 2024

Instrukcje Konwerter audio/wideo

Najnowsze instrukcje dla Konwerter audio/wideo

Abus TVAC20001 Instrukcja

10 Października 2024

StarTech.com VS123HD Instrukcja

9 Października 2024

StarTech.com VS421HDDP Instrukcja

9 Października 2024

StarTech.com ST228MX Instrukcja

9 Października 2024

StarTech.com HDMI2DVI Instrukcja

9 Października 2024

StarTech.com VGANTSCPRO Instrukcja

9 Października 2024

StarTech.com CPNT2VGAA Instrukcja

9 Października 2024

StarTech.com DVI2VGA Instrukcja

9 Października 2024

StarTech.com VS222HDQ Instrukcja

9 Października 2024

StarTech.com VS122HDMIU Instrukcja

9 Października 2024