Instrukcja obsługi Waring Commercial MX1300XTX

Waring Commercial Blendery MX1300XTX

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Waring Commercial MX1300XTX (19 stron) w kategorii Blendery. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/19

Hi-Power Blenders

Licuadoras de alta potencia

Mélangeurs/Bols mixeurs à haute puissance

MX1300XTX/MX1300XTP/MX1300XTS

MX1500XTX/MX1500XTP/MX1500XTS

OPERATING MANUAL

MANUAL DE INSTRUCCIONES

MANUEL D'UTILISATION

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be

followed, including the following:

1. READ ALL INSTRUCTIONS.

2. To protect against risk of electrical shock, do not put appliance in

water or other liquid.

3. Always unplug from outlet prior to handling or cleaning.

4. This appliance is not intended for use by persons (including

children) with reduced physical, sensory or mental capabilities, or

lack of experience and knowledge, unless they have been given

supervision or instruction concerning use of the appliance by a

person responsible for their safety.

Children should be supervised to ensure that they do not play with

the appliance.

5. Unplug from outlet when not in use, before putting on or taking off

parts and before cleaning.

6. Avoid contact with moving parts.

7. Do not operate the Waring® Blender or any other electrical

equipment with a damaged cord or plug, or after the unit

malfunctions, or is dropped or damaged in any manner. Return

it to the nearest authorized service facility for examination, repair,

or adjustment.

8. The use of attachments, including canning jars, not recommended

or sold by Waring may cause re, electric shock, or injury.

9. Do not use outdoors.

10. Do not let cord hang over edge of table or counter, or touch hot

surfaces.

11. Keep hands and utensils out of jar while blending, to prevent the

possibility of severe personal injury and/or damage to the blender.

A rubber spatula may be used, but must be used only when the

blender is not running.

12. Blade is sharp. Handle carefully.CAUTION:

13. Always operate blender with lid in place.

14. When blending hot liquids, remove center piece of two-piece cover.

See hot blending instructions, page 8.

15. The use of ear protection is recommended during extended

operating periods.

16. Do not leave blender unattended while it is running.

17. See cleaning and sanitizing instructions, pages 9-11.

NOT FOR WATERJET CLEANING.

SAVE THESE INSTRUCTIONS

GROUNDING INSTRUCTIONS

• Foryourprotection,Waring® blenders are equipped with a 3-conductor

cordset having a molded 3-prong grounding-type plug, and should be

used in combination with a properly connected grounding-type outlet as

showninFigureA.Ifagrounding-typeoutletisnotavailable,anadapter,

asshowninFigureB,maybeusedtoenablea2-slotwalloutlettobe

used with a 3-prong plug.*

 AsshowninFigureC,theadaptermustbegroundedbyattachingits

grounding lug under the screw of the outlet cover plate.

 CAUTION:Beforeusinganadapter,itmustbedeterminedthatthe

outletcoverplatescrewisproperlygrounded.Ifindoubt,consulta

licensed electrician.

Never use an adapter unless you are sure it is properly grounded.

*NOTE: Use of an adapter is not permitted in Canada.

NOTE: User-installed cord set plugs are not permitted in Europe.

MX1300XTX/MX1300XTP/MX1300XTS & MX1500XTX/MX1500XTP/MX1500XTS

BLENDER SPECIFICATIONS

•Capacity:64oz.WorkingCapacity(48oz.capacitywithMX1300XTP&

MX1500XTP versions)

•SwitchSettings:Reprogrammable

•VariableMotorSpeed:Minimum3,000RPMs/Maximum20,000RPMs

(30,000 RPM with Pulse)

•Rating:120Volts-13.0Amps

•BaseMaterial:Polycarbonate

•PolycarbonateSoundEnclosureincludedwithMX1500XTX/MX1500XTP/

MX1500XTS versions only

•Bearing:HighPrecisionBallBearing

•Cord:6-FootThree-ConductorGroundCorewithStrainReliefinBase

•OverallHeight:21Inches

• OperatingCycle:1minuteON/3minutesOFF

•Weight:18lbs

• ,NSFlistedcETLus

OPER

button to adjust the blending speed. The LCD will show the setting

speed and motor speed will change.

  NOTE:Thespeedcanbesetfrom15%to100%.Oncethe Pulse

button is released, the motor will shut off and the blender will to return

to standby mode. The changed pulse speed will be stored in memory to

replace the default speed at 100%.

REPROGRAMMABLE STATIONS

 1. Thereare4ProgramButtonsforfourreprogrammablebeveragestations

for easy operation and consistent results. The factory-set stations are

programmed as listed below:

Liquid drinks

Frozendrinks

Icecreamdrinks

Smoothies

2. To run any of the above preset programs, blender must be in

standby mode.

3. Press desired Program button to start the blender. The motor will run at

the pre-set speed within the preset blending time. The LCD will show time

remaining.Oncetheblendercountsdownto0,themotorwillstop

running and the blender will return to standby mode and prompt

PRESSANYBUTTONTOBLEND.

NOTE:Toterminateablendingprogram,simplypressStart/Stop

button or any of the program buttons. After doing this, the blender will

returntostandbymodeandLCDwillpromptPRESSANYBUTTON

TOBLEND.

REPROGRAMMING BEVERAGE STATIONS

Users can add 4 new programs to meet their needs. A program can

consist of several sections, each with a different speed and running time.

Forexample, can be replaced with a new program that has 3 sections,

as shown below:

Section 1: speed = 75%, time = 30 seconds

Section 2: speed = 100%, time = 20 seconds

Section 3: speed = 50%, time = 20 seconds

The program has the following limitations:

Speed: 15% to 100%

Time: 5 to 90 seconds

 Totalrunningtimeinaprogramcannotexceed90seconds,i.e.,sum

of the Sections cannot be longer than 90 seconds.

NOTE: The buttonwillactasthee

RESTORING FACTORY-SET BEVERAGE STATIONS

1. To restore factory-set default beverage stations, press both

Speed Up and Speed Down buttons. LCD will prompt ADD NEW

PROGRAM.

2. Press button.LCDwillpromptRESTOREDEFAULTPROGRAMS.

3. Press button to confirm and save. The LCD will display the logo for

3 seconds.

4. The unit will return to standby mode and the LCD will prompt PRESS

ANYBUTTONTOBLEND.

NOTE: The Stop key will abort this process at any point before

restoring default programs is confirmed.

DRINK COUNTER

Your reprogrammable blenders are equipped with a drink counter to keep

track of daily drink totals and total drink counts for your machine. To display

the counts, hold program buttons & simultaneously for 3 seconds.

Your display will read:

DAILYCOUNTXXXX

TTLCOUNTXXXXX

DailyCountwilldisplaythenumbersofdrinksmixedperday.TotalCount

is the accumulation of all drinks made since first use of the blender.

The Daily Count can be reset by holding in program buttons &

simultaneouslyfor3secondsthen,pressing(ON/OFF)buttonfor3seconds.

DailyCountwillresettozeroandTotalCountwillremainunchanged.

IfTotalCountneedstobereset,callyournearestWaringauthorizedservice

facility for information.

NOTE: Use of the PULSE features will not add to the daily or total drink

counts.

RESETTING THERMAL PROTECTION

• Yourblenderisequippedwithanautomaticresetfunctiontoprotectthe

motor from overheating.

• Ifyoublenderstopsrunningunderheavyuse,turnthepowerswitchto

 Offandunplugthepowercord.Emptytheblendercontainerofall

its contents and allow between 5 and 30 minutes for the motor to

cool down.

• Plugthepowercordbackintotheoutletandcontinueblending.

• Ifyourblenderdoesnotfunctionproperlyfollowingthisprocedure,

discontinue use and contact a certified Waring Customer Service Center.

IMPORTANT - HOT BL

• Cleanandsanitizemotorbasepriortoinitialuseandaftereachuse.

• Washingsolutionsbasedonnon-sudsingdetergentsandchlorine-based

sanitizingsolutionshavingaminimumchlorineconcentrationof100PPM

are recommended.

Thefollowingwashing,rinsing,andsanitizingsolutionsortheirequivalents

may be used.

SOLUTION PRODUCT DILUTION IN WATER TEMPERATURE

 Washing DiverseyWyandotte 4tablespoons Hot115˚F(46˚C)

  DiversolBX/aorCX/A /gallon

 Rinsing PlainWater  Warm95˚F(35˚C)

 Sanitizing Clorox® 1tablespoon/gallon Cold50-70˚F

  InstitutionalBleach  (10-21˚C)

• Inrepetitivebatch-processingapplications,frequentcleaningofthecon-

tainerwillprolongthelifeofthebladeassembly.Innocaseshouldactual

runningtimebetweencleaningsexceedone-halfhour.

• Donotusecontainertostoreprocessedfoodsorbeverages.

To Wash and Rinse Container

 1. REMOVECONTAINERFROMMOTORBASE.Removelid.Rinse

container interior and lid under running water. Add washing solution to

container. Scrub and flush out the container interior and lid to dislodge

and remove as much food residue as possible. Empty container.

 2. Wipedownexteriorofcontainerwithasoftclothorspongedampened

with washing solution. NOTE:Bladesaresharp.Handlecarefully.

  Washlidandlidinsertinfreshwashingsolution.Fillcontainerone-quarter

full with fresh washing solution, cover, place on motor base, and run on

high speed for one (1) minute. Empty container.

3. Repeat step (2), using clean rinse water in place of washing solution.

IMPORTANT

INORDERTOMINIMIZEPOSSIBILITYOFSCALDING,TEMPERATURE

OFWASHINGSOLUTIONANDRINSEWATERMUSTNOTEXCEED115°F

(46°C),ANDQUANTITYUSEDMUSTNOTEXCEEDONE-QUARTER

CONTAINERFULL.

IFHIGHERTEMPERATURESORLARGERQUANTITIESAREUSED,

OBSERVEALLPRECAUTIONSGIVENINTHEOPERATINGMANUALUNDER

“HOTBLENDINGINSTRUCTIONS”,page8.

To Sanitize an

LIMITED THREE-YEAR MOTOR WARRANTY

LIMITED TWO YEAR WARRANTY

Waring warrants every new Waring®CommercialBlendertobefreefromdefects

in material and workmanship for a period of two years from the date of purchase

when used with foodstuffs, nonabrasive liquids (other than detergents) and

nonabrasivesemi-liquids,providingithasnotbeensubjecttoloadsinexcessof

theindicatedrating.Inaddition,themotorinthisappliancehasafullthree-year

warranty.

Under this warranty, Waring, during the warranty period, will repair or replace

anypartwhich,uponourexamination,isdefectiveinmaterialsorworkmanship,

provided the product is delivered prepaid to the Waring Service Center at: 314

Ella T. Grasso Ave. Torrington, CT 06790, or any Factory Approved Service

Center.

This warranty does not: a) apply to any product which has become worn, defective,

damaged or broken due to use or due to repairs or servicing by other than the

WaringServiceCenteroraFactoryApprovedServiceCenter,orduetoabuse,

misuse, overloading or tampering; or b) cover incidental or consequential

damages of any kind.

The two-year warranty is applicable only to appliances used in the United States

or Canada; this supersedes all other express product warranty or warranty

statements. For Waring products sold outside of the U.S. and Canada, the

warranty is the responsibility of the local importer or distributor. This warranty

may vary according to local regulations.

Warning: This warranty is void if appliance is used on Direct Current (D.C.)

WARINGCOMMERCIAL

314 Ella T. Grasso Ave.

Torrington, CT 06790

MEDIDAS DE

IMPOR

Specyfikacje produktu

Marka:	Waring Commercial
Kategoria:	Blendery
Model:	MX1300XTX

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Waring Commercial MX1300XTX, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Blendery Waring Commercial

Waring Commercial MX1200XTP Instrukcja

13 Stycznia 2025

Waring Commercial TBB160 Instrukcja

8 Października 2024

Waring Commercial WCG75 Instrukcja

8 Sierpnia 2024

Waring Commercial MX1300XTX Instrukcja

7 Sierpnia 2024

Waring Commercial BB340 Instrukcja

6 Lipca 2024

Waring Commercial MX1500XTX Instrukcja

4 Lipca 2024

Waring Commercial MX1200XTS Instrukcja

3 Lipca 2024

Instrukcje Blendery

Najnowsze instrukcje dla Blendery

Dalkyo MB-11 Instrukcja

15 Stycznia 2025

Klarstein 60001591 Instrukcja

13 Stycznia 2025

Champion CHBL310 Instrukcja

13 Stycznia 2025

Eta Vital Blend Vaco 4100 90000 Instrukcja

13 Stycznia 2025

Salton BL2045BL Instrukcja

12 Stycznia 2025

TriStar BL-4471 Instrukcja

14 Października 2024

Saturn ST-FP0053 Instrukcja

14 Października 2024

Tefal BL600EA1 Direct Serve Instrukcja

14 Października 2024

AEG SB2500 Instrukcja

13 Października 2024

Jata BT263 Instrukcja

13 Października 2024