Instrukcja obsługi Vtech VC2105

Vtech Elektroniczna niania VC2105

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Vtech VC2105 (2 stron) w kategorii Elektroniczna niania. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

Transmit frequency Baby unit: 2412 - 2472 MHz

Parent unit: 2412 - 2472 MHz

Channels 13

LCD 5’’ Color LCD

(IPS 1280x720 pixels)

Nominal effective range Maximum power allowed by FCC and IC. Actual operating range may

vary according to environmental conditions at the time of use.

Power requirement Baby unit power adapter: Output: 5V DC, 1.5A

Parent unit power adapter: Output: 5V DC, 2A

Parent unit battery: 3.7V 5000mAh, 18.5Wh Lithium-ion battery

Specifications are subject to change without notice.

Technical specications

UL STD.

62368-1

CERTIFIED TO

CSA STD.

C22.2 NO.62368-1

CO ORMS TO NF

Android TM and Google Play TM are trademarks of Google Inc.

App Store is a trademark of Apple Inc., registered in the U.S. and other countries.

IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.

Congratulations

on purchasing your new VTech product.

Before using this baby monitor, please read the Important safety instructions.

VC2105

5” Smart Nursery

Over-the-Crib Mount Monitor

What does HD Video Monitor do?

VTech 5” Smart Nursery Over-the-Crib Mount Monitor allows you to stay close to your

baby when you are on the move or away. This monitor is Wi-Fi enabled, using your home

wireless network to stream live video and audio through the 1080p baby unit and 5-inch

color screen parent unit. It allows you to maintain a constant connection to your baby.

You can also monitor from your smartphone or mobile tablet.

VTech 5” Smart Wi-Fi 1080p Video Monitor uses MyVTech Baby Plus app to let you

instantly see and hear what’s happening with your baby from anywhere in the world. The

app can be downloaded from the App Store or the Google Play TM Store.

Go to www.vtechcanada.com for

the latest VTech product news.

ore support information

(Canada version)

Our products are NOT medical devices. They are not intended for use as medical devices or to replace

medical devices. They shall not be relied upon for any type of clinical monitoring. They are not designed

to and are not intended to diagnose, treat, cure, mitigate, alleviate or prevent any disease or other condi-

tion, including but not limited to, sudden infant death syndrome (SIDS).

Our products are only intended to assist you in tracking your baby’s general sleep patterns. False positive

or false negative readings about your baby’s sleep patterns are a potential risk of our products. Our prod-

ucts are not a substitute for medical consultation and treatment or adult supervision and care.

Disclaimer

The applied nameplate is located at the bottom of the baby unit’s base.

When using your equipment, basic safety precautions should

always be followed to reduce the risk of ﬁre, electric shock and

injury, including the following:

1. Follow all warnings and instructions marked on the product.

2. Adult setup is required.

3. CAUTION: Do not install the baby unit at a height above 6.5

feet (2 meters).

4. This product is intended as an aid. It is not a substitute for

responsible and proper adult supervision and should not be

used as such.

5. This product is not intended for use as a medical monitor.

6. Do not use this product near water, for example, near to a

bath, sink, swimming pool or shower.

7. CAUTION: Use only the battery provided. There may be a risk

of explosion if a wrong type of battery is used for the parent

unit. The battery cannot be subjected to high or low extreme

temperature and low air pressure at high altitude during

use, storage or transportation. Disposal of battery in ﬁre or

a hot oven, mechanically crushing or cutting the battery can

result in an explosion. Leaving the battery in an extremely

high temperature surrounding environment can result in an

explosion or the leakage of ﬂammable liquid of gas. Battery

subjected to extremely low air pressure may result in an

explosion or the leakage of ﬂammable liquid or gas. Dispose

of used battery according to the information in . The RBRC seal

8. Use only the power adapters included with this product.

Incorrect power adapter polarity or voltage can seriously

damage the product.

Power adapter information:

Baby Unit Output: 5V DC 1.5A

VTech Telecommunications Ltd.

Model: VT07EUS05150

Parent Unit Output: 5V DC 2A

VTech Telecommunications Ltd.

Model: VT07EUS05200

Rechargeable battery information:

3.7V 5000mAh, 18.5Wh Lithium-ion battery

Zhuhai Great Power Energy Co., Ltd.

Model: GSP806090-5Ah-3.7V-1S1P

9. The power adapter is intended to be correctly oriented in a

vertical or ﬂoor mount position. The prongs are not designed

to hold the plug in place if it is plugged into a ceiling, under-

the-table or cabinet outlet.

10. For pluggable equipment, the socket-outlet (power adapter)

should be installed near the equipment and should be easily

accessible.

11. Unplug this product from the wall outlet before cleaning.

Do not use liquid or aerosol cleaners. Use a damp cloth for

cleaning.

12. Do not modify the power adapters or replace with other

adapters, as this causes a hazardous situation.

13. Do not allow anything to rest on the power cords. Do not

install this product where the cords may be walked on or

crimped.

14. This product should be operated only from the type of power

source indicated on the marking label. If you are not sure of

the type of power supply in your home, consult your dealer or

electricity supply provider.

15. Do not overload wall outlets or use an extension cord.

16. Do not place this product on an unstable table, shelf, stand or

other unstable surfaces.

17. This product should not be placed in any area where proper

ventilation is not provided. Slots and openings in the back or

bottom of this product are provided for ventilation. To protect

them from overheating, these openings must not be blocked

by placing the product on a soft surface such as a bed, sofa

or rug. This product should never be placed near or over a

radiator or heat source.

18. Never push objects of any kind into this product through the slots

because they may touch dangerous voltage points or create a

short circuit. Never spill liquid of any kind on the product.

19. To reduce the risk of electric shock, do not disassemble

this product, but take it to an authorized service facility.

Disassembling or removing parts of the product other than

via the battery door may expose you to dangerous voltages

or other risks. Incorrect reassembling can cause electric shock

when the product is subsequently used.

20. You should test the sound reception every time you turn on

the units or move one of the components.

21. Periodically examine all components for damage.

22. There is a very low risk of privacy loss when using certain

electronic devices, such as baby monitors, cordless

telephones, etc. To protect your privacy, make sure the

product has never been used before purchase, reset the baby

monitor periodically by powering off and then powering

on the units, and power off the baby monitor if you are not

intending to use it for some time.

23. Children should be supervised to ensure that they do not play

with the product.

24. The small parts of this monitor can be swallowed by babies or

small children. Keep these parts out of reach of children.

25. The product is not intended for use by persons (including

children) with reduced physical, sensory or mental capabilities,

or lack of experience and knowledge, unless they have

been given supervision or instruction concerning use of the

appliance by a person responsible for their safety.

SAVE THESE INSTRUCTIONS

Cautions

• Use and store the product at a temperature between 32 oF

(0oC and 104)oF (40oC).

• Mishandling batteries can cause burn, ﬁre or explosion

hazards.

• Batteries should not be exposed to excessive heat such as

bright sunshine or ﬁre.

• Do not expose the product to extreme cold, heat or direct

sunlight. Do not put the product close to a heating source.

• Warning—Strangulation Hazard—Children

have STRANGLED in cords. Keep this cord out of

the reach of children (more than 3 ft (0.9m) away).

Do not remove warning label on the adapter cord.

• Never place the camera unit(s) inside the baby’s crib or

playpen. Never cover the camera unit(s) or parent unit with

anything such as a towel or a blanket.

• Other electronic products may cause interference with your

camera unit. Try installing your camera unit as far away from

these electronic devices as possible: wireless routers, radios,

cellular telephones, intercoms, room monitors, televisions,

personal computers, kitchen appliances and cordless

telephones.

Precautions for users of implanted cardiac pacemakers

Cardiac pacemakers (applies only to digital cordless devices):

Wireless Technology Research, LLC (WTR), an independent

research entity, led a multidisciplinary evaluation of the

interference between portable wireless devices and implanted

cardiac pacemakers. Supported by the U.S. Food and Drug

Administration, WTR recommends to physicians that:

Pacemaker patients

• Should keep wireless devices at least six inches from the

pacemaker.

• Should NOT place wireless devices directly over the

pacemaker, such as in a breast pocket, when it is turned ON.

WTR’s evaluation did not identify any risk to bystanders with

pacemakers from other persons using wireless devices.

Electromagnetic elds (EMF)

This VTech product complies with all standards regarding

electromagnetic ﬁelds (EMF). If handled properly and according

to the instructions in this user’s manual, the product is safe to be

used based on scientiﬁc evidence available today.

Important safety instructions What’s in the box

Quick start guide

Your baby monitor package contains the following items. Save your sales receipt and original

packaging in the event warranty service is necessary.

For mobile access:

MyVTech Baby Plus mobile app

Network Wi-Fi

Wi-Fi router 2.4GHz 802.11 b/g/n

Internet connection 1.5 Mbps @ 720p or 2.5 Mbps @1080p upload

bandwidth per baby unit

Requirements

Str angu lat io n

Haz ar d

Keep this cord out of reach of children. The cord nee ds to be at lea s t three feet

away from the child at all times . Do not

use with an extens ion cord. Do not

remov e this ta g.

Éloignez ce cordon de s e nfants. Le

cordon doit se trouve r à a u moin s tr ois

pieds d’un enfant et ce, en tout temps. N’utilisez pa s de rallonge. Ne retirez pas

cette ét iquette.

Mantenga es te cable fuera de la alcance de los niños . Est e cable de be es ta r por

lo menos tr es pies fuera de la alcance del niño en todo m om ento . No lo use

con una extens ión ina lámbr ica. No quite

es ta et iqueta .

Ri s qu e

d’é tra n gl em e n t

Ri es g o d e

e str a ng u la ci ón

Parent Unit

Parent Unit adapter

(Output: 5V 2A)

Baby Unit

Baby Unit adapter

(Output: 5V 1.5A)

Extension cable

Mounting template

mount the baby unit

Install the Baby Unit onto the First extension, and connect the adapter to the end of the cable

and the power supply to power up the Baby Unit.

Install and power on the baby unit

Slide the switch to to power ON

your Baby Unit on.

• When powering up, the Baby Unit’s

status LED turns on. It will turn off

after a while and remains off.

• The status LED is set to off by default.

NOTE:

Camera lens and surface

may get warm during

normal operation.

WARM

Connect, charge and power on the parent unit

Connect the baby monitor

• The rechargeable battery in the parent unit is built-in.

• Use only the power adapters supplied with this product.

• Make sure the parent unit and the baby unit are not connected to the switch controlled electric outlets.

• Connect the power adapters in a vertical or ﬂoor mount position only. The adapter prongs are not

designed to hold the weight of the parent unit and the baby unit, so do not connect them to any ceiling,

under-the-table, or cabinet outlets. Otherwise, the adapter may not properly connect to the outlets.

• Make sure the parent unit, the baby unit and the power adapter cords are out of reach of children.

Charge the parent unit battery before use

The parent unit runs on an internal rechargeable battery or AC power. To continuously monitor

your baby, keep the parent unit connected to AC power.

• Before using the baby monitor for the ﬁrst time, charge the parent unit battery for 12 hours. When the

parent unit battery is fully charged, the battery icon segments are solid .

• The standby time varies depending on your actual use.

The parent unit turns on automatically after connecting to the power socket, and the welcome screen

appears. You can press Power to turn the parent unit on or press and hold to turn it off.

Raise the parent unit

antenna for better

reception

Mounting: second extension Extension cover

Mounting cover

Cable cover

End cable cover Cable cover screws

and anchors (wall plugs)

x 3 x 3 x 6 x 6

Wall mount screws

and anchors (wall plugs)

(inside bag with label) (inside bag with label)

H I

Mounting bracket

( )attach to wall part

x 6

1. Insert the First extension (A) onto the Second

extension (B), aligning the slot in between. Make

sure the DC socket is out on opening of the

Second extension and ready for connection.

Cautions:

• Wall mount should be 1m above the bed sheet level or baby, and 1.7m

above the ﬂoor. You can use the mounting template (a paper ruler) for

measurement.

• Wall mount should install on the long side of the bed.

2. Insert the Second extension (B) onto

the Mounting cover (D).

3. Let the cable jack of the Extension cable pass through from the back of

the Mounting cover (D), to the opening of the Second extension (B).

Install the wall mount

Scan QR code to

watch wall mount

installation video.

6. Insert 3 plastic screw anchors (H) into the

pre-drilled holes, then insert the screws

(H) into the wall anchors. Tighten the

screws until only 1/4 inch of the screws are

exposed.

Then, attach the Mounting bracket (E) onto

the wall.

4. Connect the cable jack with the DC socket, then secure the cable with the Extension

cover (C).

5. Use Mounting template to measure the

location of the wall mount, and to mark the 3

holes for the screws.

Then, drill three holes on the wall (7/32 inch

drill bit).

3ft ( )1m

Center of the crib (long side)

Up side, to attach the

Mounting cover

8. Install the Cable covers (F) to prevent baby

from touching the cable.

Utilize the adhesive tape on the back of

the cable cover to stick the covers onto the

wall, or alternatively screw (I) the covers

onto the wall.

7. Place the Mounting cover (D) on the Mounting

bracket (E), and then slide it downward until it

locks into place.

9. Install the End cable cover (G to F) at last.

The wall mount setup

is completed!

The battery icon indicates the battery status (see the following table).

Battery indicators Battery status Action

and are displayed on

the screen;

The LED light ﬂashes.

The battery has very little

charge and may be used

for only a short time.

Charge

without interruption

(about 30 minutes).

The battery icon segments are

solid .

The battery is fully

charged.

To keep the battery charged,

connect it to AC power

when in use.

Quick start guide

Install MyVTech Baby Plus mobile app

1. Browse the App Store or the Google Play store .

2. Search for the mobile app with the keyword “myvtech baby plus“.

3. Download and install the MyVTech Baby Plus mobile app to your mobile device.

Scan the QR codes on the right to get the app.

• Make sure your mobile device meets the minimum

requirement for the mobile app.

Minimum requirement

The mobile app is compatible with:

• AndroidTM 6.0 or later; and

• iOS 12 or later.

Download the free MyVTech Baby Plus mobile app and install it to a

mobile device, then use your mobile device and the mobile app to

monitor your baby remotely.

1. Press MENU/SELECT when the parent unit is idle.

2. Go to > Connect Mobile Phone.

3. Scan the QR code in the parent unit to download the app into your

mobile device if you have not installed the app yet.

4. Follow the instructions in the mobile app to set up and pair your baby

unit to the mobile app.

Alternatively, you can download the mobile app from the App Store or

Google Play store.

Download app for mobile access

After installing the mobile app, follow the instructions in the mobile app and parent

unit to set up and pair your baby unit.

In your mobile device:

1. Tap

to run the mobile app in your mobile device, and then create a user account.

2. We recommend that you use common webmail services, such as Google Gmail for

registration of your user account. Check your email (and Spam folder), and activate

your new camera account via the email link, then sign in to your account.

3. Follow the instructions in the mobile app to pair the camera. Tap , then Add Camera

in the mobile app to get started.

• To keep this product working well and looking good, follow these guidelines:

• Avoid placing it near heating appliances and devices that generate electrical noise (for example,

motors or ﬂuorescent lamps).

• DO NOT expose it to direct sunlight or moisture.

• Avoid dropping the product or treating it roughly.

• Clean with a soft damp cloth.

• DO NOT immerse the parent unit and the baby unit in water and do not clean under running water.

• DO NOT use cleaning spray or liquid cleaners.

• Make sure the parent unit and the baby unit are dry before you connect them to the mains again.

When you are not going to use the video monitor for some time, store the parent unit, the baby unit

and the power adapters in a cool, dry location.

Below are the questions most frequently asked about the video monitor.

Can I turn the parent

unit display screen

off but keep hearing

sounds from the baby

unit?

Yes, press | LCD ON/OFF on the parent unit to turn off the screen. The parent

unit display will also dim automatically after being inactive for some time. In both

instances, you will still be able to hear all sounds from the baby unit.

Press any key to turn the screen back on.

Why is the baby

unit not responding

normally?

Try the following (in the order listed) for a common cure:

1. Disconnect the power to the baby unit.

2. Wait a few minutes before connecting power back to the baby unit.

3. Reboot the parent unit.

Why is my screen in

black and white?

The baby unit has a light sensor that measures ambient light. When the

ambient light is dim, such as during night time or in a dark room, the baby unit

activates its infrared LEDs, and displays the camera images in black and white

night vision.

Why does my baby unit

show ofﬂine? Why is the

connection lost every

now and then?

The baby unit may have lost connection to the Wi-Fi router. Check your

network and router settings.

Other electronic products may cause interference with your baby unit. Try

installing your baby unit as far away from these electronic devices as possible.

Why can’t I hear a

sound/Why can’t I hear

my baby crying?

The parent unit speaker volume may be too low. Press on the parent unit

to increase the volume.

You may have set a low sound sensitivity level. Set the sound sensitivity to a

higher level.

Frequently asked questions

General product care

Storage

What does this limited warranty cover?

The manufacturer of this VTech Product warrants to the

holder of a valid proof of purchase (“Consumer” or “you”)

that the Product and all accessories provided in the sales

package (“Product”) are free from defects in material

and workmanship, pursuant to the following terms and

conditions, when installed and used normally and in

accordance with the Product operating instructions. This

limited warranty extends only to the Consumer for Products

purchased and used in the United States of America and

Canada.

What will VTech do if the Product is not free from defects

in materials and workmanship during the limited warranty

period (“Materially Defective Product”)?

During the limited warranty period, VTech’s authorized service

representative will replace at VTech’s option, without charge,

a Materially Defective Product. If we choose to replace

the Product, we may replace it with a new or refurbished

Product of the same or similar design. We will retain

defective parts, modules, or equipment. Replacement of the

Product, at VTech’s option, is your exclusive remedy. VTech

will return the replacement Products to you in working

condition. You should expect the replacement to take

approximately 30 days.

How long is the limited warranty period?

The limited warranty period for the Product extends for ONE

(1) YEAR from the date of purchase (90 days on products

purchased as Refurbished*). This limited warranty also

applies to the replacement Product for a period of either (a)

90 days from the date the replacement Product is shipped

to you or (b) the time remaining on the original one-year

warranty (90-day limited warranty on products that are

purchased as Refurbished*); whichever is longer.

*Refurbished products purchased from our online store

carry a 90-day replacement warranty.

What is not covered by this limited warranty?

This limited warranty does not cover:

1. Product that has been subjected to misuse, accident,

shipping or other physical damage, improper installation,

abnormal operation or handling, neglect, inundation, ﬁre,

water or other liquid intrusion; or

2. Product that has been damaged due to repair, alteration

or modiﬁcation by anyone other than an authorized

service representative of VTech; or

3. Product to the extent that the problem experienced is

caused by signal conditions, network reliability, or cable or

antenna systems; or

4. Product to the extent that the problem is caused by use

with non-VTech accessories; or

5. Product whose warranty/quality stickers, product serial

number plates or electronic serial numbers have been

removed, altered or rendered illegible; or

6. Product purchased, used, serviced, or shipped for repair

from outside the United States of America or Canada, or

used for commercial or institutional purposes (including

but not limited to Products used for rental purposes); or

7. Product returned without a valid proof of purchase (see

item 2 below); or

8. Charges for installation or set up, adjustment of customer

controls, and installation or repair of systems outside the

unit.

How do you get warranty service?

To obtain warranty service in the USA, please visit our

website at www.vtechphones.com or call 1 (800) 595-9511.

In Canada, go to www.vtechcanada.com or call

1 (800) 267-7377.

NOTE: Before calling for service, please review the user’s

manual - a check of the Product’s controls and features may

save you a service call.

Except as provided by applicable law, you assume the risk

of loss or damage during transit and transportation and are

responsible for delivery or handling charges incurred in the

transport of the Product(s) to the service location. VTech

will return replaced Product under this limited warranty.

Transportation, delivery or handling charges are prepaid.

VTech assumes no risk for damage or loss of the Product in

transit.

What must you return with the Product to get warranty

service?

1. Return the entire original package and contents including

the Product to the VTech service location along with a

description of the malfunction or difﬁculty; and

2. Include a “valid proof of purchase” (sales receipt)

identifying the Product purchased (Product model) and

the date of purchase or receipt; and

3. Provide your name, complete and correct mailing

address, and telephone number.

Other limitations

This warranty is the complete and exclusive agreement

between you and VTech. It supersedes all other written or

oral communications related to this Product. VTech provides

no other warranties for this Product. The warranty exclusively

describes all of VTech’s responsibilities regarding the Product.

There are no other express warranties. No one is authorized

to make modiﬁcations to this limited warranty and you should

not rely on any such modiﬁcation. State/Provincial Law Rights:

This warranty gives you speciﬁc legal rights, and you may also

have other rights, which vary from state to state or province

to province.

Limitations: Implied warranties, including those of ﬁtness

for a particular purpose and merchantability (an unwritten

warranty that the Product is ﬁt for ordinary use) are limited

to one year from the date of purchase. Some states/

provinces do not allow limitations on how long an implied

warranty lasts, so the above limitation may not apply to you.

In no event shall VTech be liable for any indirect, special,

incidental, consequential, or similar damages (including,

but not limited to lost proﬁts or revenue, inability to use

the Product or other associated equipment, the cost of

substitute equipment, and claims by third parties) resulting

from the use of this Product. Some states/provinces

do not allow the exclusion or limitation of incidental or

consequential damages, so the above limitation or exclusion

may not apply to you.

Please retain your original sales receipt as proof

of purchase.

Limited warranty

FCC and IC regulations

FCC Part 15

NOTE: This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of

the Federal Communications Commission (FCC) rules. These requirements are intended to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio

or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

WARNING: Changes or modiﬁcations to this equipment not expressly approved by the party responsible for compliance could void

the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause

harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired

operation.

To ensure safety of users, the FCC has established criteria for the amount of radio frequency energy that can be safely absorbed by a

user or bystander according to the intended usage of the product. This product has been tested and found to comply with the FCC

criteria. The baby unit shall be installed and used such that parts of all persons’ body are maintained at a distance of approximately 8 in

(20 cm) or more. The transmitter and antenna of the parent unit shall be held at least 1 in (2.5 cm) from your face.

This Class B digital apparatus complies with Canadian requirement:

CAN ICES-3 (B)/NMB-3(B)

Industry Canada

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s

licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must

accept any interference, including interference that may cause undesired operation of the device.

The term ‘’IC:‘’ before the certiﬁcation/registration number only signiﬁes that the Industry Canada technical speciﬁcations were met.

This product meets the applicable Innovation, Science and Economic Development Canada technical speciﬁcations.

RF radiation exposure statement

The product complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. The baby unit should be

installed and operated with a minimum distance of 8 in (20 cm) between the baby unit and all persons’ body. Use of other accessories

may not ensure compliance with FCC RF exposure guidelines. This equipment complies also with Industry Canada RSS-102 with respect

to Canada’s Health Code 6 for Exposure of Humans to RF Fields.

The RBRC seal on the lithium-ion battery indicates that VTech Communications, Inc. is voluntarily participating in an

industry program to collect and recycle these batteries at the end of their useful lives, when taken out of service within

the United States and Canada. The program provides a convenient alternative to placing used lithium-ion batteries into

the trash or municipal waste, which may be illegal in your area.

VTech’s participation makes it easy for you to drop off the spent product at local retailers participating in the program

or at authorized VTech product service centers. Please call 1 (800) 8 BATTERY® for information on Li-ion battery recycling and disposal

bans/restrictions in your area. VTech’s involvement in this program is part of its commitment to protecting our environment and

conserving natural resources.

The RBRC Seal and 1 (800) 8 BATTERY

® are registered trademarks of Call2recycle, Inc.

The RBRC seal

To ensure that your HD video monitor is always at its best performance, the Parent Unit

will prompt a message and ask you to update its software and the Baby Unit’s ﬁrmware

when there are new versions available. Select “Now” to reboot the system, or switch off

and on the Parent Unit later to reboot the system into the latest software.

• To check if your device is running on the latest software, or to update your device

software, go to:

> > Software Update.

Connect your HD video monitor with home Wi-Fi network

You must connect your video monitor to your secured home Wi-Fi network in order to

receive the latest software and ﬁrmware updates. To set the Wi-Fi up, go to:

> > Congure Wi-Fi.

• Make sure the Baby Unit is on when you set up the Wi-Fi network.

Auto software and rmware update

Basic operation

Talk to your baby via the baby unit

1. Press and hold the TALK key.

2. When the icon displays on

screen, speak to your parent unit.

Your voice is transmitted to the

baby unit.

3. When ﬁnished talking, release

the key to hear your baby TALK

again.

Zoom

Press to zoom in or out in a ﬁxed zoom

sequence. indicates the image is

magniﬁed 2 times.

Adjust speaker volume

Press | to adjust the parent unit

speaker volume level received from the

baby unit.

After powering up your baby monitor, the parent unit streams live video in direct mode.

We recommend you follow the instructions on-screen to set up home Wi-Fi network

with your monitor for functionality enhancements and mobile access. See Auto software

and rmware update and Download app for mobile access in this Quick Start Guide.

Use the menu

Press on the parent unit to enter the MENU

main menu, choose a menu item, or save a

setting. You can use the parent unit menu

for advanced settings or operations, such

as to play or stop the baby unit lullaby, or

adjust the baby unit sound sensitivity.

While in the menu:

• Press | | | to scroll through the

menu options.

• Press SELECT to select an item.

• Press TALK to return to the live video.

• Press page. to go to the Help & info

To restore to the default settings or reset the

Wi-Fi connection, you can reset the parent unit

by pressing the RESET key at the back of the unit.

Insert a pin into the hole on the back of RESET

the parent unit, and then gently press the button

inside.

Turn on/off the parent unit screen

You can turn on or turn off the parent unit

screen without powering off the unit. You

will still hear sounds from the baby unit.

• Press | LCD ON/OFF on the parent unit

to turn off the screen.

• Press any key on the parent unit to turn

the screen on again.

Muted

Press and hold

VTech cares about your privacy and peace of mind. That’s why we’ve put together a list of industry-

recommended best practices to help keep your wireless connection private and your devices protected when

online. We recommend you carefully review and consider complying with the following tips.

Ensure your wireless connection is secure.

• Before installing a device, ensure your router’s wireless signal is encrypted by selecting the “WPA2-PSK

with AES” setting in your router’s wireless security menu.

Change default settings.

• Change your wireless router’s default wireless network name (SSID) to something unique.

• Change default passwords to unique, strong passwords. A strong password:

- Is at least 10 characters long.

- Is complex.

- Does not contain dictionary words or personal information.

- Contains a mix of uppercase letters, lowercase letters, special characters and numbers.

Keep your devices up to date.

• Download security patches from manufacturers as soon as they become available. This will ensure you

always have the latest security updates.

• If the feature is available, enable automatic updates for future releases.

Disable Universal Plug and Play (UPnP) on your router.

• UPnP enabled on a router can limit the effectiveness of your ﬁrewall by allowing other network devices

to open inbound ports without any intervention or approval from you. A virus or other malware program

could use this function to compromise security for the entire network.

For more information on wireless connections and protecting your data, please review the following

resources from industry experts:

1. Federal Communications Commission: Wireless Connections and Bluetooth Security Tips –

www.fcc.gov/consumers/guides/how-protect-yourself-online.

2. U.S. Department of Homeland Security: Before You Connect a New Computer to the Internet –

www.us-cert.gov/ncas/tips/ST15-003.

3. Federal Trade Commission: Using IP Cameras Safely –

https://www.consumer.ftc.gov/articles/0382-using-ip-cameras-safely.

4. Wi-Fi Alliance: Discover Wi-Fi Security –

http://www.wi-ﬁ.org/discover-wi-ﬁ/security.

Protect your privacy and online security

Need help?

Use your smartphone or mobile device to access our online help.

• Go to https://phones.vtechcanada.com/manuals; OR

• Scan the QR code on the right. Launch the camera app or

QR code scanner app on your smartphone or tablet. Hold

the device’s camera up to the QR code and frame it. Tap the

notiﬁcation to be redirected to the online help page.

- If the QR code is not clearly displayed, adjust your

camera’s focus by moving your device closer or

further away until it is clear.

• Search for the model - VC2105

You can also call our Customer Support at 1 (800) 267-7377 for help.

For operations and guides to help you use your video monitor, and for the

latest information and support, check out our online help topics and online

FAQs.

CABLE MANAGEMENT

1 2 3

Overview

Baby unit overview

1Light sensor

2Camera lens

3Microphone

4Infrared LEDs

• Allow you to see clearly in a dark environment.

5Speaker

6LED indicator

• Steadily on, then off, when the Baby Unit is

connected to the Parent Unit.

7 ON/OFF switch

• Power it on or off.

8Night light

9 Link

• Reserve for pairing the Parent Unit.

10 Night light switch

• Press to turn the night light on or off.

11 Power connector

Parent unit overview

1LINK LED light

• On when the parent unit is linked to the

baby unit.

• Flashes when the link to the baby unit

is lost.

2 LED light

• On when the parent unit is connected to

AC power, and the battery is charging.

• Flashes when the parent unit battery is

low and needs to be charged.

33- level sound indicator light

• Green: low sound level is detected by

the baby unit.

• Green and amber: moderate sound

level is detected by the baby unit.

• Green, amber and red: high sound level

is detected by the baby unit.

4TALK /

• Press and hold to talk to the baby unit.

• While in a sub-menu, press to return to

the previous menu.

5MENU | SELECT

• Press to enter the main menu.

• While in a menu, press to choose an

item, or save a setting.

6 | | | Arrow keys

• Press to navigate left, right, up and

down within the main and sub-menus.

• While viewing a zoomed image, press

to move the viewed image left, right,

up and down.

7Microphone

8 |

• Increase or decrease parent unit

volume.

9 Zoom

• Press to zoom in/out.

• While in a sub-menu, press to view the

help menu.

10 Power | LCD ON/OFF

11 Antenna

12 Speaker

13 Power jack

14 RESET

• Force reboot the parent unit.

15 Stand

Direct mode

Your baby monitor parent unit and baby unit connect to each other in Direct mode by default,

which allows you to immediately stream video out of the box.

It is NOT recommended to continue using Direct Mode connection after initial installation.

You may experience reduced signal

strength if your parent unit and baby unit

are far apart, or there are obstructing

factors, such as internal walls, between

them. Move the parent unit closer to the

baby unit to improve the signal strength.

Router mode

You are required to set up your

monitor in Router mode to enjoy live

video streaming via your parent unit

with an enhanced connection. Router

mode is the recommended mode for

stable connectivity.

Router mode uses your home Wi-

Fi network to connect your video

monitor. It supports live video

streaming through the parent unit and

smartphone app.

If you want to stream live video

remotely with your mobile device,

download and install the MyVTech

Baby Plus mobile app. With the

mobile app, your Wi-Fi router (not included) provides Internet connectivity to your HD video

monitor system. It serves as a communicating channel between your baby unit and mobile

device, allowing you to monitor and/or control your baby unit wherever you are. For more

details, see Download app for mobile access section in this quick start guide.

• When both parent unit and app are viewing the camera simultaneously,

the video quality will be optimised to deliver the best possible viewing result.

How the system works

For better security and more stable connectivity, this baby monitor requires

connecting to a Wi-Fi network and operating in Router mode connection.

Local access, for

start up quick view

and setup stage.

Mobile access

Connecting Wi-Fi to

enhance local access

Parent unit icons

Main

Sub-

menu Options

Night light

• Turn on or turn off night

light.

• Select a night light color.

• Adjust night light

brightness.

• Set the brightness to

Auto adaptive ambience.

• Set the timer to turn off

night light after 15, 30 or

60 minutes, or remain on

always.

Melodies and soothing sounds

• Play or stop.

• Select to play all

melodies, or play one of

the ﬁve melodies or ﬁve

soothing sounds.

• Set the timer to stop

playing after 15, 30 or 60

minutes, or play non-stop.

• Adjust the play volume

level.

General settings

• Connect to home Wi-Fi

network.

• Connect mobile phone.

• Adjust Baby Unit speaker

volume.

• Adjust Parent Unit screen

brightness.

• Turn the screen off timer

on/off, set to screen off

after 1, 3 or 5 minutes,

or auto screen on when

sound detected.

• Set Sound Sensitivity

Level for auto screen on.

Main

Sub-

menu Options

• Change temperature

display format.

• Mute or adjust

notiﬁcations volume

level.

• Turn on/off low battery

notiﬁcation.

• Turn on/off no link

notiﬁcation.

• Reset settings, software

update.

Alerts Settings

• Adjust alerts volume

level.

• Select maximum and

minimum temperature

for alert range;

• Turn on/off temperature

detection alert.

• Adjust Motion Sensitivity

Level to activate parent

unit screen and speaker.

• Turn on/off motion

detection alert.

• Turn on/off cry alert.

• Turn on/off face covered

alert.

Help and info

• Support Information

• System Information

Status icons

Direct mode

The parent unit and baby unit

connect to each other directly.

Red bars indicate no connection.

Router mode

The parent unit and baby unit

connect via the home Wi-Fi network.

The red icon(s) on the baby unit or

parent unit, indicates no connection

between the respective unit(s) and

the router.

Night vision is turned on.

Motion detection alert is turned on.

Cry alert is turned on.

Face covered alert is turned on.

Melodies and soothing sounds are

playing.

Night light is turned on.

Auto night light brightness is activated.

Temperature alert is turned on.

Parent unit is muted.

Humidity

Temperature

Battery level indicator

Low battery indicator

Specyfikacje produktu

Marka:	Vtech
Kategoria:	Elektroniczna niania
Model:	VC2105

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Vtech VC2105, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Elektroniczna niania Vtech

Vtech RM5754HD Instrukcja

14 Grudnia 2024

Vtech RM2751 Instrukcja

14 Grudnia 2024

Vtech VC2105 Instrukcja

14 Grudnia 2024

Vtech RM5764-2HD Instrukcja

14 Grudnia 2024

Vtech RM5754-2HD Instrukcja

14 Grudnia 2024

Vtech RM9751 Instrukcja

14 Grudnia 2024

Vtech RM5766HD Instrukcja

2 Października 2024

Vtech Clear Sounds Deluxe Instrukcja

2 Października 2024

Vtech Bel & Tel Instrukcja

24 Września 2024

Vtech BM2150 Instrukcja

23 Września 2024

Instrukcje Elektroniczna niania

Najnowsze instrukcje dla Elektroniczna niania

D-Link DCS-825L Instrukcja

22 Grudnia 2024

Alecto DVM-240 BEELD Instrukcja

21 Grudnia 2024

Oricom SC330 Instrukcja

10 Grudnia 2024

Alecto DVM200XL Instrukcja

5 Grudnia 2024

TrueLife NannyCam V24 Pro Instrukcja

9 Października 2024

TrueLife NannyCam H32 Pro Instrukcja

9 Października 2024

Denver ACT-324 Instrukcja

9 Października 2024

Denver DCA-4811 Instrukcja

8 Października 2024

Kogan KABBCMADDCA Instrukcja

7 Października 2024

Kogan KASMBMPT09A Instrukcja

7 Października 2024