Instrukcja obsługi Vtech RM5764-2HD

Vtech Elektroniczna niania RM5764-2HD

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Vtech RM5764-2HD (4 stron) w kategorii Elektroniczna niania. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/4

Congratulations

on purchasing your new VTech product. Before using this HD video monitor, please read

Important safety instructions.

For support, shopping, and everything new at VTech, visit our website at

www.vtechcanada.com.

Technical specications

Quick start guide

(Canada version)

Android TM and Google Play TM are trademarks of Google Inc.

App Store is a trademark of Apple Inc., registered in the U.S. and other countries.

IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.

UL STD.

62368-1

CERTIFIED TO

CSA STD.

C22.2 NO.62368-1

CO ORMS TO NF

RM5764HD

RM5764-2HD

5-inch Smart Wi-Fi 1080p

Pan and Tilt Monitor

What does HD Video Monitor do?

VTech 5-inch Smart Wi-Fi 1080p Pan and Tilt Monitor allows you to stay close to your baby

when you are on the move or away.

This monitor is Wi-Fi enabled, which uses your home wireless network to stream live video and

audio through the HD baby unit and 5-inch color screen parent unit. It allows you to maintain a

constant connection to your baby.

You can also monitor from your smartphone and mobile tablet.

VTech 5-inch Smart Wi-Fi 1080p Pan and Tilt Monitor uses MyVTech Baby Pro app to let you

instantly see and hear what’s happening with your baby from anywhere in the world.

The app can be downloaded from the App Store or the Google PlayTM Store, directly from your

smartphone or mobile tablet.

Frequency Baby unit: 2412 - 2462 MHz

Channels 11

LCD 5’’ Color LCD

(IPS 1280x720 pixels)

Nominal effective range Maximum power allowed by FCC and IC. Actual operating range may

vary according to environmental conditions at the time of use.

Power requirement Parent unit power adapters:

VTech, VT07EUS05200

Rated output: 5V DC, 2000mA.

Baby unit power adapters:

VTech, VT05EUS05100

Rated output: 5V DC, 1A.

Parent unit battery: 3.7V 5000mAh 18.5Wh Lithium-ion battery)

Speciﬁcations are subject to change without notice.

04/24. RM5764-XHD_CA_QSG_V5.

Go to www.vtechcanada.com

for the latest VTech product news.

For more support information

Overview

What’s in the box

Connect, charge and power on the baby monitor

CABLE MANAGEMENT

x 2 x 2

Quick start guide

Your HD video monitor package contains the following items. Save your sales receipt and

original packaging in the event warranty service is necessary.

How the system works

VTech cares about your privacy and peace of mind. That’s why we’ve put together a list of industry-

recommended best practices to help keep your wireless connection private and your devices protected

when online. We recommend you carefully review and consider complying with the following tips.

Ensure your wireless connection is secure.

• Before installing a device, ensure your router’s wireless signal is encrypted by selecting the “WPA2-

PSK with AES” setting in your router’s wireless security menu.

Change default settings.

• Change your wireless router’s default wireless network name (SSID) to something unique.

• Change default passwords to unique, strong passwords. A strong password:

- Is at least 10 characters long.

- Is complex.

- Does not contain dictionary words or personal information.

- Contains a mix of uppercase letters, lowercase letters, special characters and numbers.

Keep your devices up to date.

• Download security patches from manufacturers as soon as they become available. This will ensure

you always have the latest security updates.

• If the feature is available, enable automatic updates for future releases.

Disable Universal Plug and Play (UPnP) on your router.

• UPnP enabled on a router can limit the effectiveness of your ﬁrewall by allowing other network

devices to open inbound ports without any intervention or approval from you. A virus or other

malware program could use this function to compromise security for the entire network.

For more information on wireless connections and protecting your data, please review the following

resources from industry experts:

1. Federal Communications Commission: Wireless Connections and Bluetooth Security Tips –

www.fcc.gov/consumers/guides/how-protect-yourself-online.

2. U.S. Department of Homeland Security: Before You Connect a New Computer to the Internet –

www.us-cert.gov/ncas/tips/ST15-003.

3. Federal Trade Commission: Using IP Cameras Safely –

https://www.consumer.ftc.gov/articles/0382-using-ip-cameras-safely.

4. Wi-Fi Alliance: Discover Wi-Fi Security –

http://www.wi-ﬁ.org/discover-wi-ﬁ/security.

For mobile access:

MyVTech Baby Pro mobile app

Network Wi-Fi

Wi-Fi router 2.4GHz 802.11 b/g/n

Internet connection 1.5 Mbps @ 720p or 2.5 Mbps @1080p upload

bandwidth per baby unit

Requirements

Connect the baby monitor

• The rechargeable battery in the parent unit is built-in.

• Use only the power adapters supplied with this product.

• Make sure the parent unit and the baby unit are not connected to the switch controlled electric outlets.

• Connect the power adapters in a vertical or ﬂoor mount position only. The adapters’ prongs are not

designed to hold the weight of the parent unit and the baby unit, so do not connect them to any ceiling,

under-the-table, or cabinet outlets. Otherwise, the adapters may not properly connect to the outlets.

• Make sure the parent unit, the baby unit and the power adapter cords are out of reach of children.

Charge the parent unit battery before use

The parent unit runs on rechargeable battery or AC power. To continuously monitor your

baby, keep the parent unit connected to AC power. With the battery alone, the parent unit

can cordlessly run for a short time only.

• Before using the baby monitor for the ﬁrst time, charge the parent unit battery for 12 hours. When

the parent unit battery is fully charged, the battery icon becomes solid .

• The standby time varies depending on your actual use.

After the parent unit is fully charged, press until the welcoming screen appears.POWER

The battery icon indicates the battery status (see the following table).

Battery indicators Battery status Action

The screen displays and

. The light ﬂashes.

The battery has very little

charge and may be used

for only a short time.

Charge

without interruption

(about

30 minutes).

The battery icon becomes

solid .

The battery is fully

charged.

To keep the battery charged, connect

it to AC power when not in use.

Raise the parent unit antenna for better reception

Slide the switch to ON to power on your baby unit.

• When powering up, the baby unit’s status LED turns on.

It will turn off after a while and keeps off.

• The status LED is set to off by default. If you want to

keep the LED on, press MENU, then go to

> and turn it on.Status LED

1 set for RM5764HD

2 sets for RM5764-2HD

Baby unit overview

1Light sensor

2Camera lens

3Microphone

4Infrared LEDs

• Allow you to see clearly in a dark

surrounding.

5LED indicator

• Orange is steady on when the baby unit

is connecting to the parent unit directly

in local mode.

• Green is steady on when the baby unit

and parent unit are connecting to your

home Wi-Fi network via the Wi-Fi router.

• Flashes orange slowly during video

streaming in local mode.

• Flashes green slowly during video

streaming via home Wi-Fi network.

6ON

• Power on/off switch.

7Speaker

8Power jack

9Temperature sensor

10 Slots for wall mounting

• Wall mount bracket is included in your

package.

11 PAIR

• Reset the baby unit to factory default.

1. Press and hold PAIR key until you

hear a beep sound.

2. Release the PAIR key, and then

press the PAIR key again ﬁve times

until you hear another beep sound.

3. The baby unit will sound another

beep when the reset completes.

Then, the baby unit will reboot.

Direct mode

The parent unit and the baby unit of your video monitor connect to each others in Direct mode

by default, which allows you to stream live video right out of the box. connection Direct mode

lets you stream live video from parent unit only.

• You may experience reduced signal strength if your parent unit and baby unit are far apart, or there are

obstructing factors, such as internal walls, between them. Move the parent unit closer to the baby unit to

improve the signal strength. You can also set up Router mode to connect via your home Wi-Fi network to

improve the connection between your parent unit and baby unit.

Router mode

You can continue using your video monitor

with connection, or you Direct mode

can set up your monitor in Router mode

connection.

Router mode uses your home Wi-Fi network

to connect your video monitor. It supports

streaming live video through parent unit

and smartphone app.

We recommend that you set up your

monitor in Router mode to enjoy streaming

live video via your parent unit with better

connection.

If you want to stream live video remotely with your mobile device, download and install the

MyVTech Baby Pro mobile app. With the mobile app, your Wi-Fi router (not included) provides

Internet connectivity to your HD video monitor system. It serves as a communicating channel

between your baby unit and mobile device, allowing you to monitor and/or control your baby

unit wherever you are. For detail, see Download app for mobile access section in this quick start

guide.

• When both parent unit and app are viewing the camera simultaneously, the video quality will be

optimised to deliver the best possible viewing result.

Power on

Power o

NOTE:

Camera lens and surface may get

warm during normal operation.

WARM

Parent unit overview

1LINK LED light

• On when the parent unit is linked to the

baby unit.

• Flashes when the link to the baby unit

is lost.

2 LED light

• On when the parent unit is connected to

AC power, and the battery is charging.

• Off when the parent unit is

disconnected from AC power, or when

the parent unit is connected to AC

power and the battery is fully-charged.

• Flashes when the parent unit battery is

low and needs charging.

33- level sound indicator light

• Green on when low sound level is

detected by the baby unit.

• Green and amber on when moderate

sound level is detected by the baby

unit.

• Green, amber and red on when high

sound level is detected by the baby

unit.

4TALK /

• Press and hold to talk to the baby unit.

• While in a submenu, press to exit.

• Press to zoom in/out.

6Arrow keys

, , or

• Press to navigate leftward, upward,

rightward or downward, within the

main menu and submenus.

• While viewing image from the

baby unit, press to pan the baby

unit leftward, upward, rightward or

downward.

• While viewing zoomed image, press

to move the zoomed image leftward,

upward, rightward or downward.

7MENU/SELECT

• Press to enter the main menu.

• While in a menu, press to choose an

item, or save a setting.

8- VOL/ VOL +

• Increase or decrease parent unit’s

volume.

9Microphone

10 Speaker

11 POWER / LCD ON/OFF

12 Power jack

13 RESET

• Force reboot the parent unit.

14 Antenna

15 Stand

Local access

Mobile access Remote access

Protect your privacy and online security

1 2 3

The applied nameplate is located at the bottom of the baby

unit’s base.

When using your equipment, basic safety precautions should

always be followed to reduce the risk of ﬁre, electric shock

and injury, including the following:

1. Follow all warnings and instructions marked on the

product.

2. Adult setup is required.

3. CAUTION: Do not install the baby unit at a height above

2 meters.

4. This product is not a substitute for adult supervision of the

infant. Supervising the infant is the parent’s or caregiver’s

responsibility. This product could cease operating, and

therefore you should not assume it will continue working

properly for any given period of time. Further, this is not a

medical device and should not be used as such. This product

is intended to assist you in supervising your baby.

5. Do not use this product near water. For example, do not

use it next to a bath tub, wash bowl, kitchen sink, laundry

tub or swimming pool, or in a wet basement or shower.

6. CAUTION: Use only the battery provided. There may be a risk

of explosion if a wrong type of battery is used for the parent

unit. The battery cannot be subjected to high or low extreme

temperature and low air pressure at high altitude during use,

storage or transportation. Disposal of battery into ﬁre or a hot

oven, or mechanically crushing or cutting or the battery can

result in an explosion. Leaving the battery in an extremely high

temperature surrounding environment can result in an explosion

or the leakage of ﬂammable liquid of gas. Battery subjected

to extremely low air pressure may result in an explosion or the

leakage of ﬂammable liquid or gas. Dispose of used battery

according to the information in The RBRC seal.

7. Use only the adapters included with this product. Incorrect

adapter polarity or voltage can seriously damage the

product.

Power adapters information:

Baby Unit Output: 5V DC 1000mA

VTech Telecommunications Ltd.

Model: VT05EUS05100

Parent Unit Output: 5V DC 2A

VTech Telecommunications Ltd.

Model: VT07EUS05200

Rechargeable battery information:

3.7V 5000mAh, 18.5Wh Lithium-ion battery

Zhuhai Great Power Energy Co., Ltd.

Model: GSP806090-5Ah-3.7V-1S1P

8. The power adapters are intended to be correctly oriented

in a vertical or ﬂoor mount position. The prongs are not

designed to hold the plug in place if it is plugged into a

ceiling, under-the-table or cabinet outlet.

9. For pluggable equipment, the socket-outlet shall be

installed near the equipment and shall be easily accessible.

10. Unplug this product from the wall outlet before cleaning.

Do not use liquid or aerosol cleaners. Use a damp cloth for

cleaning.

11. Do not cut off the power adapters to replace them with

other plugs, as this causes a hazardous situation.

12. Do not allow anything to rest on the power cords. Do not

install this product where the cords may be walked on or

crimped.

13. This product should be operated only from the type of

power source indicated on the marking label. If you are

not sure of the type of power supply in your home, consult

your dealer or local power company.

14. The equipment is to be supplied from an identiﬁed USB

port complying with the requirements of Limited Power

Source.

15. Do not overload wall outlets or use an extension cord.

16. Do not place this product on an unstable table, shelf, stand

or other unstable surfaces.

17. This product should not be placed in any area where

proper ventilation is not provided. Slots and openings

in the back or bottom of this product are provided for

ventilation. To protect them from overheating, these

openings must not be blocked by placing the product on a

soft surface such as a bed, sofa or rug. This product should

never be placed near or over a radiator or heat register.

18. Never push objects of any kind into this product through

the slots because they may touch dangerous voltage points

or create a short circuit. Never spill liquid of any kind on the

product.

19. To reduce the risk of electric shock, do not disassemble

this product, but take it to an authorized service facility.

Opening or removing parts of the product other than

speciﬁed access doors may expose you to dangerous

voltages or other risks. Incorrect reassembling can cause

electric shock when the product is subsequently used.

20. You should test the sound reception every time you turn

on the units or move one of the components.

21. Periodically examine all components for damage.

22. There is a very low risk of privacy loss when using certain

electronic devices, such as baby monitors, cordless

telephones, etc. To protect your privacy, make sure the

product has never been used before purchase, reset

the baby monitor periodically by powering off and then

powering on the units, and power off the baby monitor if

you will not use it for some time.

23. Children should be supervised to ensure that they do not

play with the product.

24. The product is not intended for use by persons (including

children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge, unless

they have been given supervision or instruction concerning

use of the appliance by a person responsible for their safety.

SAVE THESE INSTRUCTIONS

Cautions

1. Use and store the product at a temperature between 0

and 40oC.

2. Do not expose the product to extreme cold, heat or direct

sunlight. Do not put the product close to a heating source.

3. Batteries should not be exposed to excessive heat such as

bright sunshine or ﬁre.

4. Warning—Strangulation Hazard—

Children have STRANGLED in cords. Keep

this cord out of the reach of children (more

than 0.9m away. Do not remove this tag.

5. Never place the baby unit(s) inside the

baby’s crib or playpen. Never cover the baby unit(s) or

parent unit with anything such as a towel or a blanket.

6. Other electronic products may cause interference with

your baby monitor. Try installing your baby monitor

as far away from these electronic devices as possible:

wireless routers, radios, cellular telephones, intercoms,

room monitors, televisions, personal computers,

kitchen appliances and cordless telephones.

Precautions for users of implanted cardiac pacemakers

Cardiac pacemakers (applies only to digital cordless devices):

Wireless Technology Research, LLC (WTR), an independent

research entity, led a multidisciplinary evaluation of the

interference between portable wireless devices and implanted

cardiac pacemakers. Supported by the U.S. Food and Drug

Administration, WTR recommends to physicians that:

Pacemaker patients

• Should keep wireless devices at least six inches from the

pacemaker.

• Should NOT place wireless devices directly over the

pacemaker, such as in a breast pocket, when it is turned ON.

WTR’s evaluation did not identify any risk to bystanders with

pacemakers from other persons using wireless devices.

Electromagnetic ﬁelds (EMF)

This VTech product complies with all standards regarding

electromagnetic ﬁelds (EMF). If handled properly and

according to the instructions in this user’s manual, the product is

safe to be used based on scientiﬁc evidence available today.

Important safety instructions

To keep this product working well and looking good, follow these guidelines:

• Avoid putting it near heating appliances and devices that generate electrical noise (for example,

motors or ﬂuorescent lamps).

• DO NOT expose it to direct sunlight or moisture.

• Avoid dropping the product or treating it roughly.

• Clean with a soft cloth.

• DO NOT immerse the parent unit and the baby unit in water and do not clean them under the tap.

• DO NOT use cleaning spray or liquid cleaners.

• Make sure the parent unit and the baby unit are dry before you connect them to the mains again.

• Clean the USB charging port of dust, dirt, and lint regularly.

When you are not going to use the HD video monitor for some time, store the parent unit, the baby

unit and the adapters in a cool and dry place.

Below are the questions most frequently asked about the HD video monitor.

Can I turn off the

parent unit screen but

keep hearing sound

from the baby unit?

The parent unit’s LCD display will dim automatically after being inactive for some

time. Press MENU/SELECT will turn the LCD display back on.

Why does the baby

unit not respond

normally?

Try the following (in the order listed) for common cure:

1. Disconnect the power to the baby unit.

2. Wait a few minutes before connecting power back to the baby unit.

3. Reboot the parent unit.

Why is my screen in

black and white?

The baby unit has a light sensor that measures the ambient light. When the

ambient light is dim, such as during nighttime or in a dark room, the baby unit

activates its infrared LEDs, and displays the camera view in black and white.

Why does my baby

unit show ofﬂine? Why

is the connection lost

every now and then?

The baby unit may lose the Internet connection. Check your network and the

router setting.

Other electronic products may cause interference with your baby unit. Try

installing your baby unit as far away from these electronic devices as possible.

Why don’t I hear a

sound/Why can’t I

hear my baby cry?

The parent unit speaker volume may be too low. Press VOL + to increase the

volume.

You may have set a low sound sensitivity level. Set the sound sensitivity to a

higher level. For details, go to for online help topics.www.vtechcanada.com

Frequently asked questions

General product care

Storage

What does this limited warranty cover?

The manufacturer of this VTech Product warrants to the holder of a valid proof of purchase (“Consumer” or “you”) that the

Product and all accessories provided in the sales package (“Product”) are free from defects in material and workmanship,

pursuant to the following terms and conditions, when installed and used normally and in accordance with the Product

operating instructions. This limited warranty extends only to the Consumer for Products purchased and used in the United

States of America and Canada.

What will VTech do if the Product is not free from defects in materials and workmanship during the limited warranty period

(“Materially Defective Product”)?

During the limited warranty period, VTech’s authorized service representative will repair or replace at VTech’s option, without

charge, a Materially Defective Product. If we repair the Product, we may use new or refurbished replacement parts. If we

choose to replace the Product, we may replace it with a new or refurbished Product of the same or similar design. We will

retain defective parts, modules, or equipment. Repair or replacement of the Product, at VTech’s option, is your exclusive

remedy. VTech will return the repaired or replacement Products to you in working condition. You should expect the repair or

replacement to take approximately 30 days.

How long is the limited warranty period?

The limited warranty period for the Product extends for ONE (1) YEAR from the date of purchase. If VTech repairs or replaces

a Materially Defective Product under the terms of this limited warranty, this limited warranty also applies to the repaired or

replacement Product for a period of either (a) 90 days from the date the repaired or replacement Product is shipped to you

or (b) the time remaining on the original one-year warranty; whichever is longer.

What is not covered by this limited warranty?

This limited warranty does not cover:

1. Product that has been subjected to misuse, accident, shipping or other physical damage, improper installation, abnormal

operation or handling, neglect, inundation, ﬁre, water or other liquid intrusion; or

2. Product that has been damaged due to repair, alteration or modiﬁcation by anyone other than an authorized service

representative of VTech; or

3. Product to the extent that the problem experienced is caused by signal conditions, network reliability, or cable or antenna

systems; or

4. Product to the extent that the problem is caused by use with non-VTech accessories; or

5. Product whose warranty/quality stickers, product serial number plates or electronic serial numbers have been removed,

altered or rendered illegible; or

6. Product purchased, used, serviced, or shipped for repair from outside the United States of America or Canada, or used for

commercial or institutional purposes (including but not limited to Products used for rental purposes); or

7. Product returned without a valid proof of purchase (see item 2 on the following part); or

8. Charges for installation or set up, adjustment of customer controls, and installation or repair of systems outside the unit.

How do you get warranty service?

To obtain warranty service in the Canada, please visit our website at www.vtechcanada.com or call 1-888-211-2005.

NOTE: Before calling for service, please review the user’s manual - a check of the Product’s controls and features may save

you a service call.

Except as provided by applicable law, you assume the risk of loss or damage during transit and transportation and are

responsible for delivery or handling charges incurred in the transport of the Product(s) to the service location. VTech will return

repaired or replaced Product under this limited warranty. Transportation, delivery or handling charges are prepaid. VTech

assumes no risk for damage or loss of the Product in transit. If the Product failure is not covered by this limited warranty, or

proof of purchase does not meet the terms of this limited warranty, VTech will notify you and will request that you authorize

the cost of repair prior to any further repair activity. You must pay for the cost of repair and return shipping costs for the repair

of Products that are not covered by this limited warranty.

What must you return with the Product to get warranty service?

1. Return the entire original package and contents including the Product to the VTech service location along with a

description of the malfunction or difﬁculty; and

2. Include a “valid proof of purchase” (sales receipt) identifying the Product purchased (Product model) and the date of

purchase or receipt; and

3. Provide your name, complete and correct mailing address, and telephone number.

Other limitations

This warranty is the complete and exclusive agreement between you and VTech. It supersedes all other written or oral

communications related to this Product. VTech provides no other warranties for this Product. The warranty exclusively describes

all of VTech’s responsibilities regarding the Product. There are no other express warranties. No one is authorized to make

modiﬁcations to this limited warranty and you should not rely on any such modiﬁcation. State/Provincial Law Rights: This warranty

gives you speciﬁc legal rights, and you may also have other rights, which vary from state to state or province to province.

Limitations: Implied warranties, including those of ﬁtness for a particular purpose and merchantability (an unwritten warranty

that the Product is ﬁt for ordinary use) are limited to one year from the date of purchase. Some states/provinces do not

allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. In no event shall VTech

be liable for any indirect, special, incidental, consequential, or similar damages (including, but not limited to lost proﬁts or

revenue, inability to use the Product or other associated equipment, the cost of substitute equipment, and claims by third

parties) resulting from the use of this Product. Some states/provinces do not allow the exclusion or limitation of incidental or

consequential damages, so the above limitation or exclusion may not apply to you.

Please retain your original sales receipt as proof of purchase.

Limited warranty

mount the baby unit (optional)

Need help?

Download app for mobile access

Test the sound level and position the HD video monitor

Basic operation

To ensure that your HD video monitor is always at its best performance, the parent unit will prompt a message and ask you to

update its software and the baby unit's ﬁrmware when there are new versions available.

• Follow the instructions on the parent unit screen to update your HD video monitor. If you skip the updates, the parent unit

and baby unit will be updated automatically when the parent unit is powered off, and then powered on again.

Connect your HD video monitor with home Wi-Fi network

• You must connect your video monitor to your secured home Wi-Fi network in order to receive the latest software and

ﬁrmware updates. To set it up, go to

> .Conﬁgure Wi-Fi

Auto software and rmware update

If you plan to install your baby unit in a designated

location, and use your home Wi-Fi network to

connect your video monitor, you need to test

which of your selected monitoring areas within the

house have good Wi-Fi signal strength. After you

have powered on your parent unit, you can use

your parent unit’s Wi-Fi signal strength indicator

to assist in checking. Once you have identiﬁed the

suitable location, you can install your baby unit.

Adjust the distance between your baby unit and

the Wi-Fi router if needed.

• Depending on surroundings and obstructing

factors, such as the effect distance and internal

walls have on signal strength, you may experience

reduced Wi-Fi signal. To improve the Wi-Fi signal

strength, adjust the distance or direction of your

parent unit. Check with your parent unit again.

test the location for the baby unit

Talk to your baby via the baby unit

1. Press and hold the TALK key.

2. When the icon displays on

screen, speak to your parent unit.

Your voice is transmitted to the

baby unit.

3. When ﬁnish talking, release

the key and hear your baby TALK

again.

Turn on/off baby unit's status LED

You may set the status LED indicator of your baby

unit on or off. Go to

> .Status LED

Zoom

Press to zoom in or out.

Adjust speaker volume

Press -VOL / to adjust your parent unit VOL+

speaker volume. It determines the volume of

sound transmitted from your baby unit.

After powering up your video monitor, the parent unit streams live video in direct mode.

We recommend you follow the instructions on screen to set up home Wi-Fi network

with your monitor for functionality enhancements and mobile access. See Auto software

and ﬁrmware update Download app for mobile access

and in this quick start guide.

Use the menu

Press MENU on the parent unit to enter

the main menu, choose a menu item, or

save a setting. You can use the parent unit

menu for advanced settings or operations,

such as to play or stop lullaby, or adjust the

motion and sound detection settings.

While in the menu:

• Press , , or to scroll among the

menu options.

• Press SELECT to select an item.

• Press TALK to return to the live video.

• Press page. to go to the Help & info

You can reset the parent unit by pressing the

RESET key at the back of the unit.

Use a pin and insert it into the hole on the

back of the parent unit, and then press the

button inside.

Turn on/off the parent unit screen

You can turn on or off the parent unit screen

without powering off the parent unit. You

can still hear sound from the baby unit.

• Press POWER on the parent unit to turn

off the screen.

• Press any keys on the parent unit to turn

on the screen again.

• This HD video monitor is intended as an aid. It is not a substitute for proper adult supervision, and should not be used as

such.

Testing the sound level of the HD video monitor

• For hearing protection, make sure the parent unit is more than 3 metres away from the baby unit. If you

hear any feedback noise from the parent unit, move the parent unit further until the noise stops. You can

also press - VOL on the parent unit to lower or mute the noise.

• Increase the parent unit speaker volume if you cannot hear the sounds transmitted from the baby unit.

Positioning the monitorHD video

• Keep the baby unit out of the reach of your baby. Never place or mount the baby unit inside the baby’s crib or playpen.

1. Place the baby unit more than 1 metre away from your baby.

> 3ft (1m)

1. Place the wall mount bracket on a

wall and then use a pencil to mark

two holes in parallel. Remove the

wall mount bracket and drill two

holes in the wall (7/32 inch drill bit).

Notes

• Check for reception strength and baby

unit angle before drilling the holes.

• The types of screws and anchors you

need depend on the composition of

the wall. You may need to purchase the

screws and anchors separately to mount

your baby units.

2. If you drill the holes into a stud, go

to step 3.

• If you drill the holes into an

object other than a stud, insert

the wall anchors into the holes.

Tap gently on the ends with a

hammer until the wall anchors

are ﬂush with the wall.

3. Align the wall mount bracket and screws with

the holes in the wall as shown. Tighten the screw

in the middle hole ﬁrst, so that the wall mount

bracket position is ﬁxed. You can tighten the

other screw in the top hole.

3. Insert the screws into the holes and

tighten the screws until only 1/4 inch of

the screws are exposed.

4. Place the baby unit on the wall

mount bracket, and then slide it

forward until it locks into place. Align

the holes on the wall mount bracket

with the screws on the wall, and slide

the wall mount bracket down until it

locks into place.

5. You can maximize your baby unit’s viewing angles by tilting the wall mount bracket.

Hold the baby unit, and then rotate the knob in anticlockwise direction. This will loosen the joint of the wall mount bracket.

Tilt your baby unit up or down to adjust to your preferred angle. Then, rotate the knob in clockwise direction to tighten the joint

and secure the angle.

4. Place the baby unit on the wall mount bracket,

and then slide it forward until it locks into place.

Connect the power adapter to the baby unit

and a power supply.

Muted

Press and hold

> 3m

10:25

< m3

> 3m

You can also call our Customer Support at for help.1-888-211-2005

Driven by system updates, the software, online help topics, and online

FAQs will be updated periodically.

For operations and guides to help you using your HD video monitor,

and for latest information and supports, go and check the online help

topics and online FAQs.

Use your smartphone or mobile device to access our online help.

1. Go to https://phones.vtechcanada.com/manuals; OR

Scan the QR code on the right. Launch the camera app or QR

code scanner app on your smartphone or tablet. Hold the

device’s camera up to the QR code and frame it. Tap the

notification to trigger the redirection of the

online help.

- If the QR code is not clearly displayed, adjust your camera’s

focus by moving your device closer or further away until it is

clear.

2. Search for the model - or .RM5764HD RM5764-2HD

Install MyVTech Baby Pro mobile app

1. or the Google Play store .Browse the App Store

2. Search for the mobile app with the keyword “myvtech baby pro“.

3. Download and install the MyVTech Baby Pro mobile app to your mobile device.

Scan the QR codes on the right to get the app.

• Make sure your mobile device meets the minimum requirement for the mobile app.

Minimum requirement

The mobile app is compatible with:

• AndroidTM 6.0 or later; and

• iOS 12 or later.

Download the free MyVTech Baby Pro mobile app and install it to a mobile device, then use your mobile

device and the mobile app to monitor your areas remotely.

1. Press when the parent unit is idle.MENU

2. Go to > Connect Mobile Phone.

3. Scan the QR code in the parent unit to download the app into your mobile device.

4. Follow the instructions in the mobile app to set up and pair your baby unit to the mobile app.

Alternatively, you can download the mobile app from the App Store or Google Play store.

After installing the mobile app, follow the instructions in the mobile app and parent unit to set up and pair your baby unit.

In your mobile device:

1. to run the mobile app in your mobile device, and then create a user account.Tap

2. We recommend that you use common webmail services, such as Google Gmail for registration of your user

account. Check your email (and Spam folder), and activate your new camera account via the email link, then

3. Follow the instructions in the mobile app to pair the camera. Tap , then in the mobile app to Add Camera

get started.

2. Adjust the angle of the baby unit to aim at your baby.

3. To avoid causing feedback noise from your HD video monitor:

• Make sure your baby unit and parent unit are more than 3 metres apart; OR

• Turn down the volume of your parent unit.

Parent unit icons

Main

Menu Options

Monitoring mode (* For RM5764-2HD only)

• View baby unit 1 or 2 in Single

mode.

• View both baby units in Patrol

mode.

• View both baby units in Split

screen.

Melodies and soothing sounds

• Select play all melodies, or play

one of the ﬁve melodies and

four soothing sounds.

• You can also set the timer to

stop playing after 15, 30 or 60

minutes, or playing non-stop.

Alerts - Sound, motion and temperature

• Select the sound and motion

sensitivity level.

• Turn on/off sound and motion

detection alerts.

• Select maximum and minimum

temperature for alert range.

• Turn on/off temperature alert.

• Turn on/off Auto Wake Up

function.

Parent unit settings

• Adjust parent unit screen

brightness.

• Turn on/off Low Battery Alert Tone.

• Turn on/off No Link Alert Tone.

• Turn on/off dim mode.

Baby unit settings

• Turn on/off .Night Vision

• Turn on/off baby unit’s status LED.

• Adjust baby unit’s speaker

volume.

• Update baby unit’s security key.

Main

Menu Options

General settings

• Connect to home Wi-Fi network.

• Turn on/off Parent unit Wi-Fi

Connection.

• Connect mobile phone.

Status icons

Direct mode

Parent unit, baby unit 1 and baby unit 2

(*For ) are connected RM5764-2HD only

to each others directly.

Router mode

Parent unit, baby unit 1 and baby unit 2

(*For ) are connected RM5764-2HD only

to home Wi-Fi network.

Baby unit 1 and 2 are being viewed in

Patrol mode (*For only).RM5764-2HD

Baby unit 1 and 2 are being viewed in

Split mode (*For RM5764-2HD only).

Night vision is turned on.

Motion alert is turned on.

Sound detection alert is turned on.

Melodies and soothing sounds are

turned on.

Parent unit speaker is muted.

Temperature alert is turned on.

Specyfikacje produktu

Marka:	Vtech
Kategoria:	Elektroniczna niania
Model:	RM5764-2HD

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Vtech RM5764-2HD, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Elektroniczna niania Vtech

Vtech RM5754HD Instrukcja

14 Grudnia 2024

Vtech RM2751 Instrukcja

14 Grudnia 2024

Vtech VC2105 Instrukcja

14 Grudnia 2024

Vtech RM5764-2HD Instrukcja

14 Grudnia 2024

Vtech RM5754-2HD Instrukcja

14 Grudnia 2024

Vtech RM9751 Instrukcja

14 Grudnia 2024

Vtech RM5766HD Instrukcja

2 Października 2024

Vtech Clear Sounds Deluxe Instrukcja

2 Października 2024

Vtech Bel & Tel Instrukcja

24 Września 2024

Vtech BM2150 Instrukcja

23 Września 2024

Instrukcje Elektroniczna niania

Najnowsze instrukcje dla Elektroniczna niania

D-Link DCS-825L Instrukcja

22 Grudnia 2024

Alecto DVM-240 BEELD Instrukcja

21 Grudnia 2024

Oricom SC330 Instrukcja

10 Grudnia 2024

Alecto DVM200XL Instrukcja

5 Grudnia 2024

TrueLife NannyCam V24 Pro Instrukcja

9 Października 2024

TrueLife NannyCam H32 Pro Instrukcja

9 Października 2024

Denver ACT-324 Instrukcja

9 Października 2024

Denver DCA-4811 Instrukcja

8 Października 2024

Kogan KABBCMADDCA Instrukcja

7 Października 2024

Kogan KASMBMPT09A Instrukcja

7 Października 2024