Instrukcja obsługi Vtech CS6929-3

Vtech telefon CS6929-3

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Vtech CS6929-3 (2 stron) w kategorii telefon. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

Congratulations

on purchasing your new VTech product. Before

using this product, please read Important

safety instructions.

This abridged user’s manual provides you with

basic installation and use instructions. A limited

set of features are described in abbreviated form.

Please refer to the User’s manual for a full set of

installation and operation instructions at

www.vtechcanada.com.

What’s in the box

Your product package contains the following

items. Save your sales receipt and original

packaging in the event warranty service is

necessary.

Handset overview

1 – Handset earpiece

2 – LCD display

3 –

• Show the menu.

• While in a menu, press to select an item, or

save an entry or setting.

4 –

Hang up a call.

Silence the ringer temporarily while the

handset is ringing.

Press and hold to erase the missed call

indicator while the phone is not in use.

Press to return to the previous menu; or

press and hold to return to idle mode, without

making changes.

5 –

Press repeatedly to show other dialing

options when reviewing a caller ID log entry.

6 –

Press to start an intercom conversation or

transfer a call (for multi-handset models only).

7 – Microphone

8 –

• Mute the microphone during a call.

• Delete digits or characters while using the

dialing keys.

Silence the ringer temporarily while the

handset is ringing.

•

9 –

Make or answer a call using the handset

speakerphone.

During a call, press to switch between the

speakerphone and the handset earpiece.

10 –

• While you have set the dial mode to pulse

and on a call, press to switch to tone dialing

temporarily.

11 –

Press to add a space when entering names.

12 –

• Press repeatedly to add or remove 1 in front

of the caller ID log entry before dialing or

saving it to the phonebook.

• Press and hold to set or dial your voicemail

number.

13 –

• Make or answer a call.

• Answer an incoming call when you hear a call

waiting alert.

14 –

• Press repeatedly to review the redial list.

• Press and hold to insert a dialing pause while

entering a number.

15 –

• Review the phonebook when the phone is not

in use.

• Increase the listening volume during a call.

• Scroll up while in a menu, phonebook, caller

ID log, or redial list.

• Move the cursor to the right when entering

numbers or names.

Review the caller ID log when the phone is not in

use.

Decrease the listening volume during a call.

Scroll down while in a menu, phonebook,

caller ID log, or redial list.

Move the cursor to the left when entering

numbers or names.

16 – light

• On when the handset is charging.

•

Telephone base overview

1 – Message window

• Shows the number of messages, and other

information of the answering system or

telephone base.

2 –

• Press to play messages.

• Press to stop playing a message.

3 –

• Press to repeat the playing message.

• Press twice to play the previous message.

• Press to skip to the next message.

4 –

• Press to delete the playing message.

• When the phone is not in use, press twice to

delete all old messages.

5 –

• Press to adjust the volume during message

playback.

• When the phone is not in use, press to adjust

the telephone base ringer volume.

6 –

• Press to turn the answering system on or off.

7 –

• Press to page all system handsets.

8 – light

• On when the answering system is turned on.

9 – light

• Flashes when there is an incoming call, or another

telephone sharing the same line is in use.

• Flashes when handsets are being deregistered.

• On when the handset is in use or being

registered.

• On when the answering system is answering a

call.

10 – Speakerphone

11 – Charging pole

Charger overview

1 – Charging pole

Display icons overview

Connect

You can choose to connect the telephone base

for desktop usage or wall mounting.

NOTES

Use only the adapters provided.

Make sure the electrical outlets are not controlled

by wall switches.

The adapters are intended to be correctly oriented

in a vertical or floor mount position. The prongs

are not designed to hold the plug in place if it is

plugged into a ceiling, under-the-table or cabinet

outlet.

TIP

If you subscribe to digital subscriber line (DSL)

high-speed Internet service through your telephone

line, make sure you install a (not DSL filter

included) between the telephone line cord and

telephone wall jack. Contact your DSL service

provider for more information.

Connect the telephone base

Connect the charger

•

Mount the telephone base

Install and charge the battery

Install the battery

Install the battery as shown below.

NOTES

Use only the battery provided.

Charge the battery provided with this product only

in accordance with the instructions and limitations

specified in this manual

If the handset will not be used for a long time,

disconnect and remove the battery to prevent

possible leakage.

•

Charge the battery

Place the handset in the telephone base or the

charger to charge.

Once you have installed the battery, the

handset LCD display indicates the battery

status (see the table below).

NOTES

For best performance, keep the handset in the

telephone base or charger when not in use.

The battery is fully charged after 12 hours of

continuous charging.

Battery

indicators

Battery status Action

The screen

is blank, or

shows Put in

charger and

flashes.

The battery

has no charge

or very little

charge. The

handset cannot

be used.

Charge without

interruption

(at least 30

minutes).

The screen

shows Low

battery and

flashes.

The battery has

enough charge

to be used for a

short time.

Charge without

interruption

(at least 30

minutes).

The screen

shows

HANDSET X.

The battery is

charged.

To keep the

battery charged,

place it in the

telephone base

or charger when

not in use.

•

Before use

After you install your telephone or power returns

following a power outage, the handset will prompt

you to set the date and time, and the answering

system through voice guide.

Set date and time

NOTE

Make sure you set the date and time including the

year correctly; otherwise the answering system does

not announce the correct day of the week for your

recorded messages time stamp.

1. Use the dialing keys ( ) to enter the 0-9

month ( ), date ( ) and year ( ). Then MM DD YY

press SELECT.

2. Use the dialing keys ( ) to enter the hour 0-9

( ) and minute ( ). Then press or HH MM

to choose or .AM PM

3. Press SELECT to save.

After the setting for the date and time, the handset

will display Voice guide to... and set up Ans

sys? alternatively.

Set answering system through voice guide

This feature assists you to do the basic setup of

the answering system. You can follow the voice

guide to record your own announcement, set the

number of rings and the message alert tone.

Press to start the voice guide SELECT

for the answering system setup. You hear

the voice prompt “Hello! This voice guide

will assist you with the basic setup of your

answering system.”

Setup your answering system by inputting

the designated numbers as instructed in the

voice guide.

Check for dial tone

Press . If you hear a dial tone, the installation

is successful.

If you do not hear a dial tone:

Make sure the installation procedures

described above are properly done.

It may be a wiring problem. If you have

changed your telephone service to digital

service from a cable company or a VoIP

service provider, the telephone line may need

to be rewired to allow all existing telephone

jacks to work. Contact your cable/VoIP

service provider for more information.

•

Operating range

This cordless telephone operates with the

maximum power allowed by the Federal

Communications Commission (FCC). Even

so, this handset and telephone base can

communicate over only a certain distance

- which can vary with the locations of the

telephone base and handset, the weather, and

the layout of your home or office.

When the handset is out of range, the handset

displays Out of range or no pwr at base.

If there is a call while the handset is out of

range, it may not ring, or if it does ring, the call

may not connect well when you press . Move

closer to the telephone base, and then press

to answer the call. If the handset moves out

of range during a telephone conversation, there

may be interference. To improve reception,

move closer to the telephone base.

Using the handset menu

Press when the phone is not in use.MENU

Press until the screen displays the or

desired feature menu.

Press to enter that menu.SELECT

To return to the previous menu, press CANCEL.

To return to idle mode, press and hold CANCEL.

Configure your telephone

Set language

The LCD language is preset to English. You can

select English, French or Spanish to be used in

all screen displays.

Press when the handset is not in MENU

use.

Scroll toto , and then press Settings SELECT

twice.

Scroll to choose , or English Français

Espa ol SELECT ñ, and then press to save.

•

Set date and time

NOTE

Make sure you set the date and time including the

year correctly; otherwise the answering system does

not announce the correct day of the week for your

recorded messages time stamp.

Press when the handset is not in MENU

use.

Scroll to , and then press Set date/time

SELECT.

3. Use the dialing keys ( ) to enter the 0-9

month ( ), date ( ) and year ( ). Then MM DD YY

press SELECT.

4. Use the dialing keys ( ) to enter the hour 0-9

( ) and minute ( ). Then press or HH MM

to choose or .AM PM

5. Press SELECT to save.

Temporary tone dialing

If you have pulse (rotary) service only, you can

switch from pulse to tone dialing temporarily

during a call.

During a call, press .

Use the dialing keys to enter the relevant

number. The telephone sends touch-tone

signals. It automatically returns to pulse

dialing mode after you end the call.

•

Telephone operation Make a call

Press or , and then dial the telephone

number.

Answer a call

Press , , or any dialing key.

End a call

Press OFF on the handset, or put the handset

into the telephone base or charger.

Speakerphone

During a call, press on the handset to

switch between speakerphone and handset

earpiece.

Volume

During a call, press on the /VOLUME/

handset to adjust the listening volume.

NOTE

The handset earpiece volume setting and

speakerphone volume setting are independent.

Mute

The mute function allows you to hear the other

party but the other party cannot hear you.

During a call, press on the handset. MUTE

The screen displays .Muted

Press MUTE again to resume the

conversation. The screen displays

Microphone on.

Join a call in progress

You can use up to two system handsets at a

time on an outside call.

When a handset is already on a call, press

or on another handset to join the call.

Press or place the handset in the OFF

telephone base or charger to exit the call.

The call continues until all handsets hang up.

Call waiting

When you subscribe to call waiting service from

your telephone service provider, you hear an

alert tone if there is an incoming call while you

are on another call.

Press to put the current call on hold FLASH

and take the new call.

Press to switch back and forth FLASH

between calls.

•

Find handset

Use this feature to find all system handsets.

To start paging:

Press on the telephone /FIND HANDSET

base. All idle handsets ring and display

** Paging **.

To end paging:

Press again on the /FIND HANDSET

telephone base.

-OR-

Press , , OFF, or any dialing key on the

handset.

-OR-

Place the handset in the telephone base or

charger.

NOTE

Do not press and hold for /FIND HANDSET

more than four seconds. It may lead to handset

deregistration.

Redial list

Each handset stores the last 10 telephone

numbers dialed. When there are already 10

entries, the oldest entry is deleted to make room

for the new entry.

Review the redial list

Press REDIAL when the handset is not in

use.

Press , or repeatedly until the , REDIAL

desired entry displays.

Dial a redial list entry

When the desired entry displays, press or

to dial.

Delete a redial list entry

When the desired redial entry displays, press

DELETE.

Intercom

Use the intercom features for conversations

between two handsets.

Press INT on your handset when not in use.

Use the dialing keys to enter a destination

handset number if necessary.

To answer the intercom call, press , , or

any dialing key on the destination handset.

To end the intercom call, press or OFF

place the handset back in the telephone

base or charger.

•

Answer an incoming call during an

intercom call

If you receive an incoming call during an

intercom call, there is an alert tone.

To answer a call, press . The intercom call

ends automatically.

To end the intercom call without answering

the outside call, press OFF. The intercom call

ends and the telephone continues to ring.

Call transfer using intercom

While on an outside call, you can use the

intercom feature to transfer the call from one

handset to another.

Press on your handset during a call. INT

The current call is put on hold. Use the

dialing keys to enter a destination handset

number if necessary.

To answer the intercom call, press , , or

any dialing key on the destination handset.

You can now have a private conservation

before transferring the call.

From this intercom call, you have the

following options:

You can let the destination handset join

you on the outside call in a

three-way conversation. Press and hold

INT on the originating handset.

You can transfer the call. Press , or OFF

place your handset back in the telephone

base or charger. Your handset displays

Line in use . The destination handset is

then connected to the outside call.

You can press to switch between the INT

outside call ( displays) and Outside call

the intercom call ( displays). Intercom

The destination handset can end the

intercom call by pressing , or OFF

by placing the handset back in the

telephone base or charger. The outside

call continues with the original system

handset.

Phonebook

The phonebook can store up to 50 entries, which

are shared by all handsets. Each entry may

consist of a telephone number up to

30 digits, and a name up to 15 characters.

•

Add a phonebook entry

Press when the phone is not in use.MENU

Scroll to then press Phonebook SELECT.

Press again to choose SELECT

Add new entry.

Use the dialing keys to enter the number (up

to 30 digits).

5. Press to move to enter the name.SELECT

6. Use the dialing keys to enter the name (up to

15 characters). Additional key presses show

other characters of that particular key.

7. Press to save.SELECT

While entering numbers and names, you can:

Press to erase a digit or character. DELETE

Press and hold DELETE to erase the entire

entry.

Press to move the cursor to the leftto move the cursor to the left or

or right.

Press and hold PAUSE to insert a dialing

pause (for entering phone numbers only).

Press to add a space (for entering names 0

only).

Press to add ( appears) or to

add # ( appears)

(for entering phone

numbers only)

Review the phonebook entriesphonebook entries

Entries are sorted alphabetically.

Press when the phone is not in use.

Scroll to browse through the phonebook, or

use the dialing keys to start a name search.

Edit a phonebook entryphonebook entry entry

When the desired entry displays, press

SELECT.

Use the dialing keys to edit the number, and

then press SELECT.

Use the dialing keys to edit the name, and

then press to save.SELECT

Delete a phonebook entry

When the desired entry displays, press

DELETE.

When the screen displays Delete entry?,

press SELECT.

Dial a phonebook entry

When the desired entry appears, press

or to dial.

•

Caller ID

If you subscribe to caller ID service, information

about each caller appears after the first or

second ring. If you answer a call before the

caller information appears on the screen, it will

not be saved in the caller ID log.

The caller ID log stores up to 30 entries. Each

entry has up to 24 digits for the phone number

and 15 characters for the name.

If the telephone number has more that 15

digits, only the last 15 digits appear. If the name

has more than 15 characters, only the first 15

characters are shown and saved in the caller ID

log.

Review a caller ID log entry

Press when the phone is not in use.CID

Scroll to browse through the caller ID log.

Missed call indicator

When there are calls that have not been

reviewed in the caller ID log, the handset

displays .XX missed calls

Each time you review a caller ID log entry

marked NEW, the number of missed calls

decreases by one.

When you have reviewed all the missed calls,

the missed call indicator no longer displays.

If you do not want to review the missed calls

one by one, press and hold on the idle CANCEL

handset to erase the missed call indicator. All

the entries are then considered old.

Dial a caller ID log entry

When the desired entry appears, press

or to dial.

Save a caller ID log entry to the

phonebook

When the desired caller ID log entry

displays, press SELECT.

2. Pressress to choose SELECT To Phonebook.

3. Use the dialing keys to modify the number,

and then press SELECT.

4. Use the dialing keys to modify the name,

and then press to save.SELECT

Delete a caller ID log entry

When the desired caller ID log entry displays,

press . DELETE

•

Delete all caller ID log entries

Press when the phone is not in use. MENU

Scroll to and then press Caller ID log

SELECT.

Scroll to and then press Delete all SELECT

twice.

Call block

If you have subscribed to caller ID service, you

can set the telephone to block unknown calls

and certain undesired calls. The call block list

can store up to 20 entries.

Block unknown calls

Press when the handset is not in use.MENU

Scroll to , and then press Call block

SELECT.

Scroll to choose , and then Calls w/o num

press SELECT.

Scroll to choose or , and Unblock Block

then press to save.SELECT

Add a call block list entry

Press when the handset is not in use.MENU

Scroll to , and then press Call block

SELECT.

Press to choose .SELECT Block list

Scroll to choose Add new entry, and then

press SELECT.

Use the dialing keys to enter the number

(up to 30 digits ).

6. Pressress to move to enter the name. SELECT

7. Use the dialing keys to enter the name (up

to 15 characters). Additional key presses

show other characters of that particular key.

8. PressPressress to save.SELECT

Review call block list

Press when the handset is not in use.MENU

Scroll to , and then press Call block

SELECT.

Press to choose . SELECT Block list

Press to choose . SELECT Review

Edit a call block list entry

When the desired entry displays, press

SELECT.

Use the dialing keys to edit the number, and

then press SELECT.

Use the dialing keys to edit the name, and

then press to save.SELECT

Save a caller ID log entry to call block list

When the desired entry displays, press

SELECT.

Scroll to To Call block, and then press

SELECT.

Use the dialing keys to modify the number,

and then press SELECT.

Use the dialing keys to modify the name,

and then press to save.SELECT

Delete a call block list entry

When the desired call block list entry displays,

press .DELETE

Mute rings of blocked calls

An incoming call will ring once and then the

system will check if the call should be blocked.

You can mute the first ring of blocked calls.

Press when the handset is not in use.MENU

Press 7464# on the handset.

Scroll to choose or First ring:On First ring:

Off SELECT, and then press .

Sound settings

Key tone

You can turn the key tone on or off.

Press when the handset is not in use.MENU

Scroll to , and then press Settings SELECT.

Scroll to choose , and then press Key tone

SELECT.

Scroll to choose or , and then press On Off

SELECT to save.

Ringer tone

You can choose from different ringer tones for

each handset.

Press when the handset is not in use.MENU

Scroll to , and then press Ringers SELECT.

Scroll to choose , and then Ringer tone

press SELECT.

Scroll to sample each ringer tone, and thensample each ringer tone, and then

press to save.SELECT

NOTE

If you turn off the ringer volume, you will not hear

ringer tone samples.

Handset ringer volume

You can adjust the ringer volume level, or turn

the ringer off.

Press when the handset is not in use.MENU

•

Scroll to , and then press Ringers SELECT.

Press to choose .SELECT Ringer volume

Scroll to adjust the volume, and then pressadjust the volume, and then press

SELECT to save.

NOTE

If the handset ringer volume is set to off, that

handset is silenced for all incoming calls except

paging tone.

Telephone base ringer volume

Press VOL VOL-+or on the telephone base to

adjust the ringer volume when the telephone

base is not in use.

When you set the ringer volume to zero,

the base ringer is off. The telephone base

announces, .“Base ringer is off.”

Temporary ringer silencing

When the telephone is ringing, you can

temporarily silence the ringer of the handset

without disconnecting the call. The next call rings

normally at the preset volume.

Press or on the handset. The OFF MUTE

handset displays and Ringer muted briefly.

Press VOL+ VOL- or on the telephone base

to adjust the ringer volume.

Quiet mode

You can turn on the quiet mode for a period of

time. During this period, all tones (except paging

tone) and call screening are muted. When you

turn on the quiet mode, the answering system

turns on automatically.

Press and hold on the handset when

idle.

Use the dialing keys ( - ) to enter the 0 9

duration, and then press to save.SELECT

To turn off the quiet mode, press and hold

on the handset when idle.

•

Go to

www.vtechcanada.com

for the latest VTech product

news.

Abridged user’s

manual

Telephones identified with this

logo have reduced noise and

interference when used with most

T-coil equipped hearing aids and

cochlear implants. The TIA-1083

Compliant Logo is a trademark of

the Telecommunications Industry

Association. Used under license.

Abridged user’s manual

(Canada version)

2 Align and place the wall mount bracket onwall mount bracket on

the standard wall plate.

Connect the telephone line cord to the

telephone base. Route it through the wall

mount bracket, and then connect it to the

wall jack.

Connect the power adapter.4.

3. Align and place the telephone base on the

wall mount bracket. Slide it down until it

clicks securely in place.

The battery icon flashes when

the battery is low and needs

charging.

The battery icon animates when

the battery is charging.

The handset ringer is turned off.

There are new voicemail

received from your telephone

service provider.

1/13 The message number currently

playing and total number of

new/old messages recorded.

ANS ON The answering system is turned

on.

ECO The ECO mode activates

automatically to reduce power

consumption when the handset

is within range from the

telephone base.

NEW There are new caller ID log

entries.

Compatible with

Hearing Aid T-Coil

TIA-1083

CS6929

CS6929-2

CS6929-26

CS6929-3

CS6929-4

DECT 6.0 cordless telephone

1 set for CS6929-2/

CS6929-26

2 sets for CS6929-3

3 sets for CS6929-4

1 set for CS6929

2 sets for CS6929-2/

CS6929-26

3 sets for CS6929-3

4 sets for CS6929-4

Handset control key panel:

THIS SIDE UP

About answering system and

voicemail service

For message recording, your telephone has a

built-in answering system, and it also supports

voicemail service offered by your telephone

service provider (subscription is required, and

fee may apply).

The main differences between them are:

Category Built-in answering

system

Voicemail from

telephone service

Storage Messages are

stored in the

telephone base.

Messages are

stored in a server

or system provided

by your telephone

service.

Your messages

will not be deleted

automatically.

You have to delete

your messages

manually.

Your messages

may be

automatically

deleted after a

period of time.

Contact your

telephone service

provider for more

details.

Method

to retrieve

messages

When you received

new messages,

handset displays

XX new messages

and the message

window on the

telephone base

flashes.

When you received

new messages,

the handset

displays and

New voicemail.

To retrieve

messages, usually

there are two ways:

Press on the

telephone base;

Access remotely

with an access

code.

•

To retrieve

messages, you

need an access

number and/or a

passcode provided

by your telephone

service provider.

Set your built-in answering system

The answering system can record and store

up to 99 messages. Each message can be up

to three minutes in length. The total storage

capacity for the announcement, messages and

memos is approximately 23 minutes. The actual

recording time depends on individual message

characteristics.

Your answering system allows you to set the

voice prompt language and your announcement,

to save and delete messages, activate call

screening, to set number of rings before pick up,

and to access remotely.

Turn the answering system on or off

The answering system must be turned on to

answer and record messages.

To turn on or off with the telephone base:

Press on the telephone base to turn /ANS ON

the built-in answering system on or off.

To turn on or off with the handset:

Press when the phone is not in use.MENU

Scroll to , and then press Answering sys

SELECT.

Scroll to , and then press Answer on/off

SELECT.

Scroll to orOn Off, and then press SELECT

to save. You hear a confirmation tone.

•

Set voice language

The voice prompt language is preset to English.

You can select English or French to be used for

the voice prompts in your answering system.

Press when the phone is not in use.MENU

Scroll to and then press Answering sys

SELECT.

Scroll to Ans sys setup and then press

SELECT.

Scroll to Voice language and then press

SELECT.

Scroll to choose or English Français.

Press to save and you hear a SELECT

confirmation tone.

Default announcement

The telephone is preset with a greeting that

answers calls with “Hello, please leave a

message after the tone.” You can use this preset

announcement, or replace it with your own.

Record your own announcement

The announcement can be up to 90 seconds in

length.

Press when the phone is not in use.MENU

Scroll to and then press Answering sys

SELECT twice.

The handset displays Play [2] Del [3]

Rec [7], and it announces, “To play, press 2.

To record, press 7.”

Press to record. The handset announces, 7

“Record after the tone. Press when you 5

are done.” After the tone, speak towards the

handset microphone. Then, press when 5

done.

Play the announcement

Press when the phone is not in use.MENU

Scroll to and then press Answering sys

SELECT twice.

The handset displays Play [2] Del [3]

Rec [7], and it announces, “To play, press 2.

To record, press 7.”

Press 2 to play the announcement.

Delete the announcement

Press when the phone is not in use.MENU

Scroll to and then press Answering sys

SELECT twice.

The handset displays Play [2] Del [3]

Rec [7], and it announces, “To play, press 2.

To record, press 7.”

Press 3 to delete your own recorded

announcement.

Set number of rings

You can set the answering system to answer an

incoming call after two, three, four, five or six rings;

or toll saver. If you choose toll saver, the answering

system answers a call after two rings when you have

new messages, or after four rings when you have

no new messages.

Press when the phone is not in use.MENU

Scroll to Answering sys then press SELECT.

Scroll to Ans sys setup then press SELECT.

Scroll to then press # of rings SELECT.

Scroll to choose , , , , or 2 3 4 5 6 Toll saver.

Press to save and you hear a SELECT

confirmation tone.

Set message alert tone

When the message alert tone is set to on,

and there is at least one new message, the

telephone base beeps every 10 seconds. The

message alert tone is preset to off.

Press when the phone is not in use.MENU

Scroll to Answering sys then press SELECT.

Scroll to Ans sys setup then press SELECT.

Scroll to Msg alert tone then press SELECT.

Scroll to choose Tone: On Tone: Offor .

Press to save and you hear a SELECT

confirmation tone.

Voice guide

This feature is an alternative way for you to do

the basic setup of the answering system. You

can follow the voice guide to record your own

announcement, set the number of rings and the

message alert tone.

Press when the phone is not in use.MENU

Scroll to and then press Answering sys

SELECT.

Scroll to and then press Voice guide ,

SELECT. You hear the voice prompt “Hello!

This voice guide will assist you with the

basic setup of your answering system.”

Setup your answering system by inputting

designated numbers as instructed in the

voice guide.

Use your built-in answering system

New message indication

When there are new answering system

messages, The handset displays XX new

messages and the message window on the

telephone base flashes.

Message playback

To playback messages at the telephone base:

Press when the phone is not in use./PLAY

Options during playback:

Press or to adjust the speaker VOL + VOL-

volume.

Press to skip to the next message./SKIP

Press /REPEAT to repeat the message

currently playing. Press /REPEAT twice to

listen to the previous message.

Press to delete the playing X/DELETE

message. The system advances to the next

message.

Press to stop./STOP

To playback messages with a handset:

Press when the phone is not in use, MENU

and then press SELECT.

Options during playback:

Press to adjust the message /VOLUME/

playback volume.

Press to skip to the next message.6

Press to repeat the message. Press twice 4 4

to listen to the previous message.

Press to delete the playing message.3

Press to stop the playback.OFF

Press to switch between speakerphone

and handset earpiece.

Delete all messages

You can only delete old (reviewed) messages.

You cannot delete new messages until you

review them. You cannot retrieve deleted

messages.

To delete all messages with the telephone

base:

Press twice when the phone is X/DELETE

not in use.

To delete all messages with a handset:

Press when the phone is not in use.MENU

Scroll to , and then press Answering sys

SELECT.

Scroll to , and then press Delete all old

SELECT. You hear a confirmation tone.

•

Remote access

A two-digit security code is required to access

the answering system remotely from any

touch-tone telephone. The preset code is . 19

You can use this preset code, or set your own.

Dial your telephone number from any

touch-tone telephone.

When the system plays your announcement,

enter the two-digit security code.

Enter one of the following remote commands.

Command Description

1Play all messages.

2Play new messages.

3Delete the current message

(during playback).

33 Delete all old messages.

4Repeat the current message

(during playback).

5Stop.

*5 Hear a list of remote

commands.

6Skip to the next message

(during playback).

*7 Record a new announcement.

8End the call.

0Turn the answering system

on or off.

Hang up or press to end the call.8

Remote access code

You can set your own remote access code from

00 99 to .

Press when the phone is not in use.MENU

Scroll to Answering sys then press SELECT.

Scroll to Ans sys setup then press SELECT.

Scroll to , and then press Remote code

SELECT.

Use the dialing keys to enter a two-digit number.

-OR-

Scroll to a desired two-digit number.

Press to save and you hear a SELECT

confirmation tone.

Use the built-in answering system

and voicemail service

You can use your answering system and

voicemail service together by setting your

answering system to answer before voicemail

service answers as described below. To learn

how to program your voicemail settings, contact

your telephone service provider.

If you are on a call, or if the answering system

is busy recording a message and you receive

another call, the second caller can leave a

voicemail message.

Set your answering system to answer calls

at least two rings earlier than your voicemail

service is set to answer. For example, if your

voicemail service answers after six rings, set

your answering system to answer after four

rings. Some voicemail service providers may

program the delay before answering calls in

seconds instead of rings. In this case, allow

six seconds per ring when determining the

appropriate setting.

Retrieve voicemail from

telephone service

Voicemail is a feature available from most

telephone service providers. It may be included

with your telephone service, or may be optional.

Fees may apply.

Retrieve voicemail

When you received a voicemail, the handset

displays and . To retrieve, New voicemail

you typically dial an access number provided by

your telephone service provider, and then enter

a security code. Contact your telephone service

provider for instructions on how to configure the

voicemail settings and listen to messages.

NOTE

After you have listened to all new voicemail

messages, the indicators on the handset turn off

automatically.

Set your voicemail number

You can save your access number on each

handset for easy access to your voicemail. After

you saved the voicemail number, you can

press and hold to retrieve voicemail.

Press when the handset is not in use.MENU

Scroll to and then press Settings SELECT.

Scroll to and then press Voicemail #

SELECT.

Use the dialing keys to enter the voicemail

number (up to 30 digits).

Press to save.SELECT

•

Turn off the new voicemail indicators

If you have retrieved your voicemail while away

from home, and the handset still displays the new

voicemail indicators, use this feature to turn off

the indicators.

NOTE

This feature turns off the indicators only, it does not

delete your voicemail messages.

Press when the handset is not in use.MENU

Scroll to , and then press Settings SELECT.

Scroll to , and then press Clr voicemail

SELECT. You hear a confirmation tone.

Expand your telephone system

You can add new handsets ( cordless CS6909),

headsets ( ) or speakerphones ( IS6200 MA3222

or AT&T TL80133) to your telephone system. All

accessories are sold separately. Your telephone

base supports a maximum of five devices.

For more details, refer to the user’s manual that

comes with your new device.

•

ECO mode

This power conserving technology reduces

power consumption for optimal battery

performance. The ECO mode activates

automatically whenever the handset is

synchronized with the telephone base.

General product care

Taking care of your telephone

Your cordless telephone contains sophisticated

electronic parts, so it must be treated with care.

Avoid rough treatment

Place the handset down gently. Save the original

packing materials to protect your telephone if you

ever need to ship it.

Avoid water

Your telephone can be damaged if it gets wet.

Do not use the handset outdoors in the rain,

or handle it with wet hands. Do not install the

telephone base near a sink, bathtub or shower.

Electrical storms

Electrical storms can sometimes cause power

surges harmful to electronic equipment. For your

own safety, take caution when using electrical

appliances during storms.

Cleaning your telephone

Your telephone has a durable plastic casing that

should retain its luster for many years. Clean it

only with a dry non-abrasive cloth. Do not use

dampened cloth or cleaning solvents of any kind.

Frequently asked questions

Below are the questions most frequently asked about

the cordless telephone. If you cannot find the answer to

your question, visit our website at

www.vtechcanada.com or call 1 (800) 267-7377.

My telephone

does not work

at all.

Make sure the telephone base is

installed properly, and battery is

installed and charged correctly.

For optimum daily performance,

return the handset to the

telephone base after use.

The display

shows . No line

I cannot hear the

dial tone.

Disconnect the telephone line

cord from your telephone and

connect it to another telephone.

If there is no dial tone on that

other telephone either, then

the telephone line cord may be

defective. Try installing a new

telephone line cord.

If changing telephone line cord

does not help, the wall jack

(or the wiring to this wall jack)

may be defective. Contact your

telephone service provider.

You may be using a new cable

or VoIP service, the existing

telephone jacks in your home

may no longer work. Contact your

service provider for solutions.

The display

shows To

and ...see

manual

alternately. The

handset does not

work at all.

The handset is deregistered from

the telephone base.

Unplug the telephone base

power adapter from the

power outlet, and then plug it

back in.

Place the handset in the

telephone base to register it

back.

The handset shows Registered

and you hear a beep when the

registration process completes.

This process takes about 90

seconds to complete.

The answering

system does

not record

messages.

Make sure the answering system

is on. When the answering system

is on, ANS ON should display on

the handset and the telephone

base.

When the answering machine

memory is full, it does not record

new messages until some old

messages are deleted.

If you subscribe to voicemail

service, change the number of

rings so that your answering

system answers before your

voicemail service answers. To

determine how many rings activate

your voicemail service, contact your

telephone service provider.

The answering

system does

not announce

the correct day

of the week

for recorded

messages time

stamp.

Make sure you have set the date

and time. See Configure your

telephone section.

The messages

on the answering

system are

incomplete.

If a caller leaves a very long

message, part of it may be lost

when the answering system

disconnects the call after the

preset recording time.

If the memory on the answering

system becomes full during a

message, the answering system

stops recording and disconnects

the call.

I accidentally

set my LCD

language to

Spanish or

French, and I

don’t know how

to change it back

to English.

While the handset is not in use,

press MENU and then enter

364 to change the handset

LCD language back to English.

Important safety instructions

When using your telephone equipment, basic

safety precautions should always be followed to

reduce the risk of fire, electric shock and injury,

including the following:

Read and understand all instructions.

Follow all warnings and instructions marked

on the product.

Unplug this product from the wall outlet

before cleaning. Do not use liquid or aerosol

cleaners. Use a damp cloth for cleaning.

Do not use this product near water such as

near a bath tub, wash bowl, kitchen sink,

laundry tub or swimming pool, or in a wet

basement or shower.

Do not place this product on an unstable

table, shelf, stand or other unstable surfaces.

Avoid placing the telephone system in places

with extreme temperature, direct sunlight, or

other electrical devices. Protect your phone

from moisture, dust, corrosive liquids and

fumes.

Slots and openings in the back or bottom

of the telephone base and handset are

provided for ventilation. To protect them

from overheating, these openings must not

be blocked by placing the product on a soft

surface such as a bed, sofa or rug. This

product should never be placed near or

over a radiator or heat register. This product

should not be placed in any area where

proper ventilation is not provided.

This product should be operated only from

the type of power source indicated on the

marking label. If you are not sure of the

type of power supply in your home or office,

consult your dealer or local power company.

Do not allow anything to rest on the power

cord. Do not install this product where the

cord may be walked on.

Never push objects of any kind into this

product through the slots in the telephone

base or handset because they may touch

dangerous voltage points or create a short

circuit. Never spill liquid of any kind on the

product.

To reduce the risk of electric shock, do

not disassemble this product, but take it to

an authorized service facility. Opening or

removing parts of the telephone base or

handset other than specified access doors

may expose you to dangerous voltages

or other risks. Incorrect reassembling can

cause electric shock when the product is

subsequently used.

10.

11.

Do not overload wall outlets and extension

cords.

Unplug this product from the wall outlet and

refer servicing to an authorized service facility

under the following conditions:

When the power supply cord or plug is

damaged or frayed.

If liquid has been spilled onto the product.

If the product has been exposed to rain or

water.

If the product does not operate normally

by following the operating instructions.

Adjust only those controls that are

covered by the operation instructions.

Improper adjustment of other controls

may result in damage and often requires

extensive work by an authorized

technician to restore the product to normal

operation.

If the product has been dropped and the

telephone base and/or handset has been

damaged.

If the product exhibits a distinct change in

performance.

14. Avoid using a telephone (other than cordless)

during an electrical storm. There is a remote

risk of electric shock from lightning.

15. Do not use the telephone to report a gas

leak in the vicinity of the leak. Under certain

circumstances, a spark may be created

when the adapter is plugged into the power

outlet, or when the handset is replaced in its

cradle. This is a common event associated

with the closing of any electrical circuit. The

user should not plug the phone into a power

outlet, and should not put a charged handset

into the cradle, if the phone is located in an

environment containing concentrations of

flammable or flame-supporting gases, unless

there is adequate ventilation. A spark in

such an environment could create a fire or

explosion. Such environments might include:

medical use of oxygen without adequate

ventilation; industrial gases (cleaning

solvents; gasoline vapors; etc.); a leak of

natural gas; etc.

16. Only put the handset of your telephone next

to your ear when it is in normal talk mode.

17. The power adapters are intended to be

correctly oriented in a vertical or floor mount

position. The prongs are not designed to hold

the plug in place if it is plugged into a ceiling,

under-the-table or cabinet outlet.

18. For pluggable equipment, the socket-outlet

shall be installed near the equipment and

shall be easily accessible.

SAVE THESE INSTRUCTIONS

12.

13.

•

Battery

CAUTION: Use Only Supplied Battery.

Do not dispose of the battery in a fire. Check

with local waste management codes for

special disposal instructions.

Do not open or mutilate the battery. Released

electrolyte is corrosive and may cause burns

or injury to the eyes or skin. The electrolyte

may be toxic if swallowed.

Exercise care in handling batteries in

order not to create a short circuit with

conductive materials.

Charge the battery provided with or identified

for use with this product only in accordance

with the instructions and limitations specified

in this manual.

Precautions for users of implanted

cardiac pacemakers

Cardiac pacemakers (applies only to digital

cordless telephones):

Wireless Technology Research, LLC (WTR),

an independent research entity, led a

multidisciplinary evaluation of the interference

between portable wireless telephones and

implanted cardiac pacemakers. Supported by

the U.S. Food and Drug Administration, WTR

recommends to physicians that:

Pacemaker patients

Should keep wireless telephones at least six

inches from the pacemaker.

Should NOT place wireless telephones

directly over the pacemaker, such as in a

breast pocket, when it is turned ON.

Should use the wireless telephone at the ear

opposite the pacemaker.

WTR’s evaluation did not identify any risk to

bystanders with pacemakers from other persons

using wireless telephones.

About cordless telephones

Privacy: The same features that make a

cordless telephone convenient create some

limitations. Telephone calls are transmitted

between the telephone base and the

cordless handset by radio waves, so there

is a possibility that the cordless telephone

conversations could be intercepted by radio

receiving equipment within range of the

cordless handset. For this reason, you should

not think of cordless telephone conversations

as being as private as those on corded

telephones.

Electrical power: The telephone base of this

cordless telephone must be connected to a

working electrical outlet. The electrical outlet

•

should not be controlled by a wall switch. Calls

cannot be made from the cordless handset if

the telephone base is unplugged, switched off

or if the electrical power

is interrupted.

Potential TV interference: Some cordless

telephones operate at frequencies that may

cause interference to televisions and VCRs.

To minimize or prevent such interference, do

not place the telephone base of the cordless

telephone near or on top of a TV or VCR.

If interference is experienced, moving the

cordless telephone farther away from the TV

or VCR often reduces or eliminates

the interference.

Rechargeable batteries: Exercise care in

handling batteries in order not to create a

short circuit with conducting material such

as rings, bracelets, and keys. The battery or

conductor may overheat and cause harm.

Observe proper polarity between the battery

and the battery charger.

Nickel-metal hydride rechargeable

batteries: Dispose of these batteries in a safe

manner. Do not burn or puncture the battery.

Like other batteries of this type, if burned or

punctured, they could release caustic material

which could cause injury.

The RBRC® seal

The RBRC® seal on the nickel-metal hydride

battery indicates that VTech Communications,

Inc. is voluntarily participating in an industry

program to collect and recycle these batteries at

the end of their useful lives, when taken out of

service within the United States and Canada.

The RBRC® program provides a convenient

alternative to placing used nickel-metal hydride

batteries into the trash or municipal waste, which

may be illegal in your area.

VTech’s participation in RBRC

makes it easy

for you to drop off the spent battery at local

retailers participating in the RBRC

program or

at authorized VTech product service centers.

Please call 1 (800) 8 BATTERY

for information

on Ni-MH battery recycling and disposal bans/

restrictions in your area. VTech’s involvement

in this program is part of its commitment to

protecting our environment and conserving natural

resources.

RBRC® and

1 (800) 8 BATTERY

are registered trademarks of

Rechargeable Battery Recycling

Corporation.

•

FCC, ACTA and IC regulations

FCC Part 15

This equipment has been tested and found

to comply with the requirements for a Class

B digital device under Part 15 of the Federal

Communications Commission (FCC) rules.

These requirements are intended to provide

reasonable protection against harmful

interference in a residential installation.

This equipment generates, uses and can

radiate radio frequency energy and, if not

installed and used in accordance with the

instructions, may cause harmful interference

to radio communications. However, there is

no guarantee that interference will not occur

in a particular installation. If this equipment

does cause harmful interference to radio or

television reception, which can be determined

by turning the equipment off and on, the user is

encouraged to try to correct the interference by

one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the

equipment and receiver.

Connect the equipment into an outlet on a

circuit different from that to which the receiver

is connected.

Consult the dealer or an experienced radio/TV

technician for help.

WARNING: Changes or modifications to this

equipment not expressly approved by the party

responsible for compliance could void the user’s

authority to operate the equipment.

This device complies with Part 15 of the FCC

rules. Operation is subject to the following two

conditions:

(1) this device may not cause harmful

interference, and (2) this device must accept

any interference received, including interference

that may cause undesired operation. Privacy

of communications may not be ensured when

using this telephone.

To ensure safety of users, the FCC has

established criteria for the amount of radio

frequency energy that can be safely absorbed

by a user or bystander according to the intended

usage of the product. This product has been

tested and found to comply with the FCC criteria.

The handset may be safely held against the ear

of the user. The telephone base shall be installed

and used such that parts of the user’s body other

than the hands are maintained at a distance of

approximately 20 cm (8 inches) or more.

This Class B digital apparatus complies with

Canadian requirement:

CAN ICES-3 (B)/NMB-3(B)

•

FCC Part 68 and ACTA

This equipment complies with Part 68 of the FCC

rules and with technical requirements adopted

by the Administrative Council for Terminal

Attachments (ACTA). The label on the back

or bottom of this equipment contains, among

other things, a product identifier in the format

US:AAAEQ##TXXXX. This identifier must be

provided to your telephone service provider upon

request.

The plug and jack used to connect this equipment

to premises wiring and the telephone network

must comply with applicable Part 68 rules and

technical requirements adopted by ACTA. A

compliant telephone cord and modular plug is

provided with this product. It is designed to be

connected to a compatible modular jack that is

also compliant. An RJ11 jack should normally be

used for connecting to a single line and an RJ14

jack for two lines. See the installation instructions

in the user’s manual.

The Ringer Equivalence Number (REN) is used

to determine how many devices you may connect

to your telephone line and still have them ring

when you are called. The REN for this product is

encoded as the 6th and 7th characters following

the US: in the product identifier (e.g., if ## is 03,

the REN is 0.3). In most, but not all areas, the

sum of all RENs should be five (5.0) or less. For

more information, contact your telephone service

provider.

This equipment may not be used with Party

Lines. If you have specially wired alarm dialing

equipment connected to your telephone line,

ensure the connection of this equipment

does not disable your alarm equipment. If you

have questions about what will disable alarm

equipment, consult your telephone service

provider or a qualified installer.

If this equipment is malfunctioning, it must

be unplugged from the modular jack until the

problem has been corrected. Repairs to this

telephone equipment can only be made by the

manufacturer or its authorized agents. For repair

procedures, follow the instructions outlined under

the Limited warranty.

If this equipment is causing harm to the

telephone network, the telephone service

provider may temporarily discontinue your

telephone service. The telephone service

provider is required to notify you before

interrupting service. If advance notice is

not practical, you will be notified as soon as

possible. You will be given the opportunity to

correct the problem and the telephone service

provider is required to inform you of your right

to file a complaint with the FCC. Your telephone

service provider may make changes in its

facilities, equipment, operation, or procedures

that could affect the proper functioning of

this product. The telephone service provider

is required to notify you if such changes are

planned.

If this product is equipped with a corded or

cordless handset, it is hearing aid compatible.

If this product has memory dialing locations,

you may choose to store emergency telephone

numbers (e.g., police, fire, medical) in these

locations. If you do store or test emergency

numbers, please:

Remain on the line and briefly explain the reason

for the call before hanging up.

Perform such activities in off-peak hours, such as

early morning or late evening.

Industry Canada

This device complies with Industry Canada

licence-exempt RSS standard(s).

Operation is subject to the following two

conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any

interference received, including interference that

may cause undesired operation.

Privacy of communications may not be ensured

when using this telephone.

The term ‘’IC:‘’ before the certification/registration

number only signifies that the Industry Canada

technical specifications were met.

The Ringer Equivalence Number (REN) for this

terminal equipment is 1.0. The REN indicates

the maximum number of devices allowed to

be connected to a telephone interface. The

termination of an interface may consist of any

combination of devices subject only to the

requirement that the sum of the RENs of all the

devices does not exceed five.

This product meets the applicable Innovation,

Science and Economic Development Canada

technical specifications.

Limited warranty

What does this limited warranty cover?

The manufacturer of this VTech Product warrants to

the holder of a valid proof of purchase (“Consumer” or

“you”) that the Product and all accessories provided in

the sales package (“Product”) are free from defects in

material and workmanship, pursuant to the following

terms and conditions, when installed and used

normally and in accordance with the Product operating

instructions. This limited warranty extends only to the

Consumer for Products purchased and used in the

United States of America and Canada.

What will VTech do if the Product is not free from

defects in materials and workmanship during

the limited warranty period (“Materially Defective

Product”)?

During the limited warranty period, VTech’s authorized

service representative will repair or replace at VTech’s

option, without charge, a Materially Defective Product. If

we repair the Product, we may use new or refurbished

replacement parts. If we choose to replace the Product,

we may replace it with a new or refurbished Product

of the same or similar design. We will retain defective

parts, modules, or equipment. Repair or replacement of

the Product, at VTech’s option, is your exclusive remedy.

VTech will return the repaired or replacement Products

to you in working condition. You should expect the repair

or replacement to take approximately 30 days.

How long is the limited warranty period?

The limited warranty period for the Product extends for

ONE (1) YEAR from the date of purchase. If VTech

repairs or replaces a Materially Defective Product

under the terms of this limited warranty, this limited

warranty also applies to the repaired or replacement

Product for a period of either (a) 90 days from the

date the repaired or replacement Product is shipped to

you or (b) the time remaining on the original one-year

warranty; whichever is longer.

What is not covered by this limited warranty?

This limited warranty does not cover:

Product that has been subjected to misuse,

accident, shipping or other physical damage,

improper installation, abnormal operation or

handling, neglect, inundation, fire, water or other

liquid intrusion; or

Product that has been damaged due to repair,

alteration or modification by anyone other than an

authorized service representative of VTech; or

Product to the extent that the problem experienced

is caused by signal conditions, network reliability,

or cable or antenna systems; or

Product to the extent that the problem is caused by

use with non-VTech accessories; or

Product whose warranty/quality stickers, product

serial number plates or electronic serial numbers

have been removed, altered or rendered illegible; or

Product purchased, used, serviced, or shipped for

repair from outside the United States of America

or Canada, or used for commercial or institutional

purposes (including but not limited to Products

used for rental purposes); or

Product returned without a valid proof of purchase

(see item 2 on the next page); or

Charges for installation or set up, adjustment

of customer controls, and installation or repair of

systems outside the unit.

How do you get warranty service?

To obtain warranty service, please visit our website at

www.vtechcanada.com 1 (800) 267-7377 or call .

NOTE: Before calling for service, please review the

user’s manual - a check of the Product’s controls and

features may save you a service call.

Except as provided by applicable law, you assume the

risk of loss or damage during transit and transportation

and are responsible for delivery or handling charges

incurred in the transport of the Product(s) to the service

location. VTech will return repaired or replaced Product

under this limited warranty. Transportation, delivery

or handling charges are prepaid. VTech assumes no

risk for damage or loss of the Product in transit. If the

Product failure is not covered by this limited warranty,

or proof of purchase does not meet the terms of this

limited warranty, VTech will notify you and will request

that you authorize the cost of repair prior to any further

repair activity. You must pay for the cost of repair and

return shipping costs for the repair of Products that are

not covered by this limited warranty.

What must you return with the Product to get

warranty service?

Return the entire original package and contents

including the Product to the VTech service location

along with a description of the malfunction or

difficulty; and

Include a “valid proof of purchase” (sales receipt)

identifying the Product purchased (Product model)

and the date of purchase or receipt; and

Provide your name, complete and correct mailing

address, and telephone number.

Other limitations

This warranty is the complete and exclusive agreement

between you and VTech. It supersedes all other

written or oral communications related to this Product.

VTech provides no other warranties for this Product.

The warranty exclusively describes all of VTech’s

responsibilities regarding the Product. There are no

other express warranties. No one is authorized to make

modifications to this limited warranty and you should

not rely on any such modification.

State/Provincial Law Rights: This warranty gives you

specific legal rights, and you may also have other rights,

which vary from state to state or province to province.

Limitations: Implied warranties, including those of

fitness for a particular purpose and merchantability (an

unwritten warranty that the Product is fit for ordinary

use) are limited to one year from the date of purchase.

Some states/provinces do not allow limitations on how

long an implied warranty lasts, so the above limitation

may not apply to you. In no event shall VTech be liable

for any indirect, special, incidental, consequential,

or similar damages (including, but not limited to lost

profits or revenue, inability to use the Product or other

associated equipment, the cost of substitute equipment,

and claims by third parties) resulting from the use of

this Product. Some states/provinces do not allow the

exclusion or limitation of incidental or consequential

damages, so the above limitation or exclusion may not

apply to you.

Please retain your original sales receipt as

proof of purchase.

Technical specifications

Frequency

control

Crystal controlled PLL synthesizer

Transmit

freuency

Handset: 1921.536-1928.448 MHz

Telephone base: 1921.536-1928.448

MHz

Channels 5

Nominal

effective

range

Maximum power allowed by FCC and

IC. Actual operating range may vary

according to environment conditions at

the time of use.

Power

requirements

Handset: 2.4V Ni-MH battery

Telephone base: 6V DC @ 400mA

Charger: 6V AC @ 300mA

Memory Phonebook:

50 memory locations; up to 30 digits

and 15 characters

Caller ID log:

30 memory locations; up to 24 digits

and 15 characters

Specifications are subject to change without notice.

Document order number: 91-008360-040-100

Telephone base control key panel:

Specyfikacje produktu

Marka:	Vtech
Kategoria:	telefon
Model:	CS6929-3

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Vtech CS6929-3, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje telefon Vtech

Vtech CS6124-21 Instrukcja

14 Grudnia 2024

Vtech CS6929-3 Instrukcja

14 Grudnia 2024

Vtech CS6124-11 Instrukcja

14 Grudnia 2024

Vtech CS6929-2 Instrukcja

14 Grudnia 2024

Vtech IS8101 Instrukcja

14 Grudnia 2024

Vtech IS8201 Instrukcja

14 Grudnia 2024

Vtech IS8102 Instrukcja

14 Grudnia 2024

Vtech CS6114-11 Instrukcja

14 Grudnia 2024

Vtech CS6114-2 Instrukcja

14 Grudnia 2024

Vtech CS6114 Instrukcja

14 Grudnia 2024

Instrukcje telefon

Najnowsze instrukcje dla telefon

Ranex RX 6031 Instrukcja

15 Grudnia 2024

ClearOne Chat 150 Instrukcja

11 Grudnia 2024

Philips D1212 Instrukcja

7 Grudnia 2024

Philips M475 Instrukcja

6 Grudnia 2024

Xiaomi 5 Pro Instrukcja

6 Grudnia 2024

Profoon PDX-7020 Instrukcja

14 Października 2024

Profoon PDX-100 Instrukcja

14 Października 2024

Uniden XS 1415 Instrukcja

13 Października 2024

Uniden XDECT 6105BTU Instrukcja

10 Października 2024

Yealink MP56 E2 Instrukcja

9 Października 2024