Instrukcja obsługi Vtech CS6419-16

Vtech telefon CS6419-16

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Vtech CS6419-16 (16 stron) w kategorii telefon. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/16
1
CS6419/CS6419-15/
CS6419-16/CS6419-2
DECT 6.0 cordless telephone
User’s manual
Parts checklist
Your telephone package contains the following items. Save your sales
receipt and original packaging in the event warranty service is necessary.
Telephone base
User’s manual
User’s manual
Battery
(1 for CS6419, CS6419-15
and CS6419-16, and
2 for CS6419-2)
Telephone line
cord
Battery compartment
cover
(1 for CS6419, CS6419-15 and
CS6419-16, and 2 for CS6419-2)
Telephone base
power adapter
Charger and
charger adapter
(1 for CS6419-2)
Handset
(1 for CS6419,
CS6419-15 and
CS6419-16, and
2 for CS6419-2)
Wall mount bracket
BC
The ENERGY STAR® program (www.energystar.gov) recognizes and
encourages the use of products that save energy and help protect our
environment. We are proud to mark this product with the ENERGY
STAR® label indicating it meets the latest energy efficiency guidelines.
Introduction
To protect our environment and conserve natural resources, this user’s
manual provides you with the basic installation and use instructions. A limited
set of features are described in abbreviated form.
Please refer to the online User’s manual for a full set of installation and
operation instructions at www.vtechphones.com.
Before using this VTech product, please read Important safety instructions
on page 11 of this user’s manual.
Telephones identified with this logo have reduced noise and
interference when used with most T-coil equipped hearing aids and
cochlear implants. The TIA-1083 Compliant Logo is a trademark of
the Telecommunications Industry Association. Used under license.
T
Compatible with
Hearing Aid T-Coil
TIA-1083
Register online to get an additional 3-month warranty!
Go to www.vtechphones.com to register your product for enhanced warranty
support and latest VTech product news.
2
Telephone base and charger installation
Install the telephone base and charger as shown below.
Telephone
line cord
Telephone base Charger
Telephone base
power adapter
If you have DSL
high speed Internet
service, a DSL filter
(not included) is
required.
Electrical
outlet not
controlled by a
wall switch Electrical
outlet not
controlled by
a wall switch
Telephone
wall jack
Charger adapter
Use only the power adapter and battery supplied with this product.
To order a replacement, visit our website at www.vtechphones.com or
call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call
1 (800) 267-7377.
The power adapter is intended to be correctly oriented in a vertical or
floor mount position. The prongs are not designed to hold the plug in
place if it is plugged into a ceiling, under-the-table or cabinet outlet.
Battery installation
Install the battery as shown below.
3 Slide the battery compartment
cover towards the center of the
handset until it clicks into place.
4 Place the handset in the
telephone base or charger
to charge.
CHARGE light
remains on when
charging.
1 Plug the battery connector
securely into the socket.
2 Place the battery with the label
facing up and THIS SIDE UP
the wires inside the battery
compartment.
If the handset will not be used for a long time, disconnect and remove the
battery to prevent possible leakage.
Battery charging
Once you have installed the battery, the screen indicates the battery status (see
the table on the next page).
For best performance, keep the handset in the telephone base or charger
when not in use.
The battery is fully charged after 10 hours of continuous charging.
If you place the handset in the telephone base or the charger without
plugging in the battery, the screen displays NO BATTERY.
3
Tabletop to wall mount installation
The telephone comes ready for tabletop use. Follow the steps below to
mount your telephone on a wall.
1 Plug one end of the telephone
line cord into the TEL LINE
jack at the bottom of the
telephone base and the base
power adapter into the
jack.POWER
4 Align the holes on the bracket
with the standard wall plate and
slide the bracket down until it
locks securely. Bundle the
telephone line cord and power
adapter cord neatly with
twist ties.
2
Position the telephone base
against the wall mount bracket
as shown. Insert the extended
tabs marked on the wall B
mount bracket into the slots
marked on the back of the B
telephone base.
/FIND HANDSET
Pre to ss once and then release
page all system handsets.
IN USE light
On when the handset is in use.
Flashes quickly when there is an
incoming call.
Flashes slowly when another
telephone sharing the same line
is in use.
Telephone base overview
Battery indicators Battery status Action
The screen is blank,
or shows PLACE IN
CHARGER and flashes.
Battery has no charge
or very little charge. The
handset cannot
be used.
Charge without
interruption (at least
30 minutes).
The screen shows
LOW BATTERY and
flashes.
Battery has enough
charge to be used for
a short time.
Charge without
interruption (at least
30 minutes).
The screen shows
HANDSET X.
Battery is charged. To keep the battery
charged, place it in
the telephone base or
charger when not in use.
Route the telephone line cord
through the hole on the wall
mount bracket and plug it into
the telephone wall jack. Route
the power cord out of the
telephone base and plug it into
an electrical outlet not controlled
by a wall switch.
3

Specyfikacje produktu

Marka: Vtech
Kategoria: telefon
Model: CS6419-16

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Vtech CS6419-16, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje telefon Vtech

Vtech

Vtech CS5119-16 Instrukcja

2 Października 2024
Vtech

Vtech DS6101 Instrukcja

2 Października 2024
Vtech

Vtech CS6419 Instrukcja

15 Września 2024
Vtech

Vtech DS6071 Instrukcja

11 Września 2024
Vtech

Vtech VC7151 Instrukcja

3 Września 2024
Vtech

Vtech CS6419-16 Instrukcja

27 Sierpnia 2024

Instrukcje telefon

Najnowsze instrukcje dla telefon

Profoon

Profoon PDX-7020 Instrukcja

14 Października 2024
Profoon

Profoon PDX-100 Instrukcja

14 Października 2024
Uniden

Uniden XS 1415 Instrukcja

13 Października 2024
Uniden

Uniden XDECT 6105BTU Instrukcja

10 Października 2024
Yealink

Yealink MP56 E2 Instrukcja

9 Października 2024
Yealink

Yealink MP54 E2 Instrukcja

9 Października 2024
Yealink

Yealink MP58-WH E2 Instrukcja

9 Października 2024
Yealink

Yealink MP52 E2 Instrukcja

9 Października 2024
VXi

VXi D200 Dialpad Instrukcja

9 Października 2024
Lewitt

Lewitt LCT 240 Instrukcja

9 Października 2024