Instrukcja obsługi Vonyx VX210


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Vonyx VX210 (24 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/24
VX210 Full PA Sound System
Ref. nr.: 170.110
INSTRUCTION MANUAL
GEBRUIKSAANWIJZING
GEBRAUCHSANLEITUNG
MANUAL DE INSTRUCCIONES
MANUEL D'INSTRUCTIONS
INSTRUKCJA OBSŁUGI
NÁVOD K POUŽI
V1.1
2
ENGLISH
Congratulations to the purchase of thi Vonyx product. Please read this manual thoroughly prior to using the product in order to s
benet fully from all features.
Read the manual prior to using the product. Follow the instructions in order not to invalidate the warranty. Take all precautions
to avoid re and/or electrical shock. Repairs must only be carried out by a qualied technician in order to avoid electrical shock.
Keep the manual for future reference.
- Prior to using the product, please ask advice from a
specialist. When the product is switched on for the rst
time, some smell may occur. This is normal and will
disappear after a while.
- The product contains voltage carrying parts. Therefore do
NOT open the housing.
- Do not place metal objects or pour liquids into the
produc is may cause electrical shock and t. Th
malfunction.
- Do not place the product near heat sources such as
radiators, etc. Do not place the product on a vibrating
surface. Do not cover the ventilation holes.
- The product is not suitable for continuous use.
- Be careful with the mains lead and do not damage it. A
faulty or damaged mains lead can cause electrical shock
and malfunction.
- When unplugging the product from a mains outlet,
always pull the plug, never the lead.
- Do not plug or unplug the product with wet hands.
- If the ug and/or the mains lead are damaged, they pl
need to be replaced by a qualied technician.
- If the product is damaged to such an extent that internal
parts are visible, do NOT plug the product into a mains
outlet and DO NOT switch the unit on. Contact your
dealer. Do NOT connect the product to a rheostat or
dimmer.
- To avoid re and shock hazard, do not expose the
product to rain and moisture.
- All repairs should be carried out by a qualied technician
only.
- Connect the product to an earthed mains outlet (220-
240Vac/50Hz) protected by a 10- fuse. 16A
- During a thunderstorm or if the product will not be used
for a longer period of time, unplug it from the mains. The
rule is: Unplug it from the mains when not in use.
- If the product has not been used for a longer period of
time, condensation may occur. Let the unit reach room
temperature before you switch it on. Never use the
product in humid rooms or outdoors.
- To prevent accidents in companies, you must follow the
applicable guide lines and follow the instructions.
- Do not repeatedly switch the produ on and o. This ct
shortens the life time.
- Keep the product out of the reach of children. Do not
leave the product unattended.
- Do not use cleaning sprays to clean switches. The
residues of these sprays cause deposits of dust and
grease. In case of malfunction, always seek advice from
a specialist.
- Do not force the controls.
- his product is with speaker inside which can cause If t
magnetic eld. Keep the product at least 60cm away
from computer or TV.
- If this product have a built-in lead-acid rechargeable
battery. Please recharge the battery every 3 months if
you are not going to use the product for a long period of
time. Otherwise the battery may be permanently
damaged.
- If the battery is damaged please replace with same
specications battery. And dispose the damaged battery
environment friendly.
- If the product has fallen, always have it checked by a
qualied technician before you switch the product on
again.
- Do not use chemicals to clean the unit. They damage the
varnish. Only clean the product with a dry cloth.
- Keep away from electronic equipment that may cause
interference.
- Only use original spares for repairs, otherwise serious
damage and/or dangerous radiation may occur.
- Switch the product o prior to unplugging it om the fr
mains and/or other equipment. Unplug all leads and
cables prior to moving the product.
- Make sure that the mains lead cannot be damaged when
people walk on it. Check the mains lead before every use
for damages and faults!
- The mains voltage is 220-240Vac/50Hz. Check if power
outlet match. If you travel, make sure that the mains
voltage of the country is suitable for this product.
- Keep the original packing material so that you can
transport the product in safe conditions.
This mark attracts the att ion of the user to high voltages that are present inside the housing and that are of sucient ent
magnitude to cause a shock hazard.
This mark attracts the attention of the user to important instructions that are contained in the manual and that he should
read and adhere to.
The product s been certied CE. It is prohibited to make any changes to the product. They would invalidate the CE certicate ha
and their guarantee!
NOTE: To make sure that the product will function normally, it must be used in rooms with a temperature between 5°C/ °41 F and
35 95°C/ °F .
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your
dealer about the way to proceed. The specications are typical. T actual values can slightly change from one unit to the other. he
Specications can be changed without prior notice.
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the product. This would also
invalid your warranty. The warranty is not applicabl in case of accidents or damages caused by inappropriate use or disrespect of the e
warnings contained in this manual. Vonyx cannot be held responsible for personal injuries caused by a disrespect of the safety
recommendations and warnings. This is also applicable to all damages in whatever form.
3
UNPACKING INSTRUCTION
CAUTION! Carefully unpack the box upon receipt. Check the contents to ensure that all parts are present and have en be
received in good condition. Notify the shipper immediately and retain packaging material if any parts appear damaged from
shipping or the package itself shows signs of mishandling. Save the package and all packaging materials. If the product must be
returned, it is important that the product is returned in the original factory box and packaging.
If the device has been exposed to drastic temperature uctuation (e.g. after transportation), do not switch it on immediately. The
arising condensation water ght damage your device. Leave the device switched o until it has reached room temperature. mi
POWER SUPPLY
The label on the back/under side of the product indicates the mains voltage to which it must be connected. Check that the mains
voltage corresponds to this. Any other voltage than the one indicated may cause irreparable damage to the unit. The unit must
also be connected directly to the mains voltage and no dimmer or adjustable power supply may be used.
Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate
electrical ground to avoid the risk of electrocution or re.
REPLACING THE FUSE
If the fuse is defective, replace the fuse with a fuse of the same type and value. Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Open the fuse holder on the rear panel with a tting screwdriver.
Step 2: Remove the old fuse from the fuse holder .
Step 3: Install the new fuse in the fuse holder.
Step 4: Replace the fuse holder in the housing.
OPERATION PANEL
1. CROPHONE INPUT MI
Balanced XLR input for connecting a dynamic microphone.
2. LINE INPUT
Unbalanced 6.3mm line jack input for connecting a guitar, synthesizer,
CD-player or other line-level devices.
3. BASS
Rotate to adjust the low ass) tones of the corresponding channel. (b
4. TREBLE
Rotate to adjust the high (treble) tones of the corr ponding channel. es
5. LEVEL
Rotate to adjust the volume level of the corresponding channel.
6. FX
Rotate to adjust the fx eect level of the corresponding chan . nel
7. LINE INPUT
RCA line input.
8. DELAY LEVEL
Adjust the mix level of the eect sound.
9. DELAY TIME
Adj t the time interval of the delays. us
10. DELAY REPEAT
Adjust the rate of the delays.
11. TREBLE
Rotate to adjust the high (treble) tones of all channels.
12. MID
Rotate adjust the mid tones of all channels.to
13. BASS
Rotate to adjust the low (bas tones of channels. s) all
14. AUX INPUT
Unbalanced 6.3mm auxiliary jack input.
15. AUX OUTPUT
Unbalanced 6.3mm auxiliary jack output.
16. AUX INPUT
RCA auxiliary input. Signal is sent to the speaker output directly.
17. REC OUTPUT
RCA REC output to connect with a tape deck, soundcard, or portable recorder.
The signal mirrors the speaker outpu t.
18. MP3 BUTTON CLUSTER
Stop press to stop play.
Play/pause press to (re)start or pause playbac k.
Previous press to change to previous track. Press and hold to decrease track
volume.
Next press to change to next track. Press and hold to crease track volume. in
Mode press to switch modes.
19. USB
20. SD


Specyfikacje produktu

Marka: Vonyx
Kategoria: głośnik
Model: VX210

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Vonyx VX210, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje głośnik Vonyx

Vonyx

Vonyx SPJ-1200ABT Instrukcja

7 Października 2024
Vonyx

Vonyx Verve38 Instrukcja

3 Października 2024
Vonyx

Vonyx SPJ-1000ABT Instrukcja

3 Października 2024
Vonyx

Vonyx SPLASH300 Instrukcja

29 Września 2024
Vonyx

Vonyx SL15 Instrukcja

29 Września 2024
Vonyx

Vonyx SL10 Instrukcja

29 Września 2024
Vonyx

Vonyx VX210 Instrukcja

26 Września 2024
Vonyx

Vonyx VSA10P Instrukcja

26 Września 2024
Vonyx

Vonyx Verve46 Instrukcja

23 Września 2024
Vonyx

Vonyx VSA700-BP Instrukcja

22 Września 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Teufel

Teufel Rockster Air Instrukcja

15 Października 2024
Alpine

Alpine PSS-22WRA Instrukcja

15 Października 2024
Bauhn

Bauhn APPS-0724 Instrukcja

15 Października 2024
Aiwa

Aiwa SP-A100 Instrukcja

15 Października 2024
Alpine

Alpine 30MC Instrukcja

14 Października 2024
Magnat

Magnat Needle 9000 ALU Instrukcja

14 Października 2024
Pioneer

Pioneer SP-T22A-LR Instrukcja

14 Października 2024
Sharp

Sharp PS-932 Instrukcja

14 Października 2024
Pyle

Pyle PDWR64BTW Instrukcja

13 Października 2024