Instrukcja obsługi Vonyx PLAY 1000

Vonyx głośnik PLAY 1000

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Vonyx PLAY 1000 (16 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/16
Ref. nr.: 178.382
INSTRUCTION MANUAL
GEBRUIKSAANWIJZING
GEBRAUCHSANLEITUNG
MANUAL DE INSTRUCCIONES
MANUEL D'INSTRUCTIONS
INSTRUKCJA OBSŁUGI
V1.1
2
ENGLISH
Congratulations to the purchase of this product. Please read this manual thoroughly prior to using the in order to Vonyx product
benefit fully from all features.
Read the manual prior to using the . Follow the instructions in order not to invalidate the warranty. Take all precautions product
to avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock.
Keep the manual for future reference.
- Prior to using the product, please ask advice from a
specialist. When the is switched on forproduct the first
time, some smell may occur. This is normal and will
disappear after a while.
- The product contains voltage carrying parts. Therefore do
NOT open the housing.
- Do not place metal objects or pour liquids into the
product. This may cause electrical shock and
malfunction.
- Do not place the near heat sources such as product
radiators, etc. Do not place the on a vibrating product
surface. Do not cover the ventilation holes.
- The product is not suitable for continuous use.
- Be careful with the mains lead and do not damage it. A
faulty or damaged mains lead can cause electrical shock
and malfunction.
- When unplugging the product from a mains outlet,
always pull the plug, never the lead.
- Do not plug or unplug the product with wet hands.
- If the plug and/or the mains lead are damaged, they
need to be replaced by a qualified technician.
- If the product is damaged to such an extent that internal
parts are visible, do NOT plug the into a mains product
outlet and DO NOT switch the unit on. Contact your
dealer. Do NOT connect the to a rheostat or product
dimmer.
- To avoid fire and shock hazard, do not expose the
product to rain and moisture.
- All repairs should be carried out by a qualified technician
only.
- -Connect the product to an earthed mains outlet (220
240Vac/50Hz) protected by a 10 16A fuse.-
- During a thunderstorm or if the product will not be used
for a longer period of time, unplug it from the mains. The
rule is: Unplug it from the mains when not in use.
- If the product has not been used for a longer period of
time, condensation may occur. Let the unit reach room
temperature before you switch it on. Never use the
product in humid rooms or outdoors.
- To prevent accidents in companies, you must follow the
applicable guide lines and follow the instructions.
- Do not repeatedly switch the product on and off. This
shortens the life time.
- Keep the product out of the reach of children. Do not
leave the product unattended.
- Do not use cleaning sprays to clean switches. The
residues of these sprays cause deposits of dust and
grease. In case of malfunction, always seek advice from
a specialist.
- Do not force the controls.
- If this product is with speaker inside which can cause
magnetic field. Keep at least 60cm away the product
from computer or TV.
- - - If the product has built in lead acid rechargeable battery.
Please recharge the battery every 3 months if you are
not going to use the unit for a long period of time. Or the
battery may be damaged.
- If the battery is damaged please replace with same
specifications battery. And dispose the damaged battery
environment friendly.
- If the product has fallen, always have it checked by a
qualified technician before you switch the product on
again.
- Do not use chemicals to clean the unit. They damage the
varnish. Only clean the with a dry cloth.product
- Keep away from electronic equipment that may cause
interference.
- Only use original spares for repairs, otherwise serious
damage and/or dangerous radiation may occur.
- Switch the product off prior to unplugging it from the
mains and/or other equipment. Unplug all leads and
cables prior to moving the product.
- Make sure that the mains lead cannot be damaged when
people walk on it. Check the mains lead before every use
for damages and faults!
- -The mains voltage is 220 240Vac/50Hz. Check if power
outlet match. If you travel, make sure that the mains
voltage of the country is suitable for this product.
- Keep the original packing material so that you can
transport the in safe conditionsproduct .
This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient
magnitude to cause a shock hazard.
This mark attracts the attention of the user to important instructions that are contained in the manual and that p2-he should
read and adhere to.
The product producthas been certified CE. It is prohibited to make any changes to the . They would invalidate the CE certificate
and their guarantee!
NOTE: To make sure that the product will function normally, it must be used in rooms with a temperature between 5°C/ °F 41 and
35°C/95°F .
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your
dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other.
Specifications can be changed without prior notice.
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the product. This would also
invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the
warnings contained in this manual. Vonyx cannot be held responsible for personal injuries caused by a disrespect of the safety
recommendations and warnings. This is also applicable to all damages in whatever form.
3
UNPACKING INSTRUCTION
CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are
present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if
any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing
materials. In the event that the pro must be returned to the factory, it is important that the be returned in the original duct product
factory box and packing.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The
arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.
CONTROL ELEMENTS
1. Microphone Input 1
6.3mm (1/4”) jack for connecting microphone.
2. Microphone Input 2
6.3mm (1/4”) jack for connecting microphone.
3. Guitar Input
6.3mm (1/4”) jack for connecting guitar.
4. Guitar Volume
Turn this knob to adjust the guitar volume.
5. Line Input
3 . .5mm (1/4”) jack for connecting audio device
6. USB Input
Connect your USB devices to this slot to play music with MP3-format.
7. Bass control
Adjust low tone control of microphone.
8. Treble control
Adjust high tone control of microphone.
9. c Echo ontrol
Adjust the echo effect of the microphone.
10. Treble control
Adjust high tone control of master output.
11. Bass control
Adjust low tone control of master output.
12. Microphone Volume
Turn jog wheel to adjust the microphone volume.
13. Master Volume
Turn jog wheel to adjust “master” volume (output level) of Party Station.
14. Mute Button
Press this button to switch Mute mode
15. FM Button
Press this button to switch FM mode directly.
16. Line Input Button
Press this button to switch AUX input mode
17. USB button
Press this button to switch USB mode directly
18. EQ Button
Press this button to adjust the equalizer mode; Normal, POP, Classic, Jazz, Court, Rock.
19. Previous button
Press shortly Previous song or press above 3 seconds for fast backward.
20. Next button
Press shortly for the next song or press above 3 seconds for fast forward.
21. Repeat button
Press this button to repeat single, display will show ”ONE”. ton to repeat all, display will show “ALL”. Press this but
22. Standby button
Press this button to switch standby mode.
23. Light Button
Press this button to switch light on/off.
24. BT button
Press this button to switch BT mode directly.
25. Play button
Press this button to switch een play and pause. betw
CONNECTING WITH BT-D EVICE
1. evice which Activate the BT function on your- d (Mobile phone, tablet etc.) you want to play the
music. See the operating instructions for that device.
2. soundb Press the “MODE” button and activate BT function of - ox.
3. Select 00 device connection “PLAY10 ” on your BT- and make the BT-
If password is required, you can enter "0000".
Attention: The BT distance is approx. 10 meter without any barrier.

Specyfikacje produktu

Marka: Vonyx
Kategoria: głośnik
Model: PLAY 1000

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Vonyx PLAY 1000, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje głośnik Vonyx

Vonyx

Vonyx SPJ-1200ABT Instrukcja

7 Października 2024
Vonyx

Vonyx Verve38 Instrukcja

3 Października 2024
Vonyx

Vonyx SPJ-1000ABT Instrukcja

3 Października 2024
Vonyx

Vonyx SPLASH300 Instrukcja

29 Września 2024
Vonyx

Vonyx SL15 Instrukcja

29 Września 2024
Vonyx

Vonyx SL10 Instrukcja

29 Września 2024
Vonyx

Vonyx VX210 Instrukcja

26 Września 2024
Vonyx

Vonyx VSA10P Instrukcja

26 Września 2024
Vonyx

Vonyx Verve46 Instrukcja

23 Września 2024
Vonyx

Vonyx VSA700-BP Instrukcja

22 Września 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Teufel

Teufel Rockster Air Instrukcja

15 Października 2024
Alpine

Alpine PSS-22WRA Instrukcja

15 Października 2024
Bauhn

Bauhn APPS-0724 Instrukcja

15 Października 2024
Aiwa

Aiwa SP-A100 Instrukcja

15 Października 2024
Harman Kardon

Harman Kardon Citation One Instrukcja

14 Października 2024
Alpine

Alpine 30MC Instrukcja

14 Października 2024
Magnat

Magnat Needle 9000 ALU Instrukcja

14 Października 2024
Pioneer

Pioneer SP-T22A-LR Instrukcja

14 Października 2024
Sharp

Sharp PS-932 Instrukcja

14 Października 2024
Pyle

Pyle PDWR64BTW Instrukcja

13 Października 2024