Instrukcja obsługi Vonyx LM54

Vonyx głośnik LM54

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Vonyx LM54 (20 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 16 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/20
LM-Series Light Motion Speaker
Ref. nr.: 178.610; 178.613
INSTRUCTION MANUAL
GEBRUIKSAANWIJZING
GEBRAUCHSANLEITUNG
MANUAL DE INSTRUCCIONES
MANUEL D'INSTRUCTIONS
INSTRUKCJA OBSŁUGI
V1.3
2
ENGLISH
Congratulations to the purchase of this Vonyx product. Please read this manual thoroughly prior to using the product in order to
benet fully from all features.
Read the manual prior to using the product. Follow the instructions in order not to invalidate the warranty. Take all precautions
to avoid re and/or electrical shock. Repairs must only be carried out by a qualied technician in order to avoid electrical shock.
Keep the manual for future reference.
- Prior to using the product, please ask advice from a
specialist. When the product is switched on for the rst
time, some smell may occur. This is normal and will
disappear after a while.
- The product contains voltage carrying parts. Therefore do
NOT open the housing.
- Do not place metal objects or pour liquids into the
product. This may cause electrical shock and
malfunction.
- Do not place the product near heat sources such as
radiators, etc. Do not place the product on a vibrating
surface. Do not cover the ventilation holes.
- The product is not suitable for continuous use.
- Be careful with the mains lead and do not damage it. A
faulty or damaged mains lead can cause electrical shock
and malfunction.
- When unplugging the product from a mains outlet,
always pull the plug, never the lead.
- Do not plug or unplug the product with wet hands.
- If the plug and/or the mains lead are damaged, they
need to be replaced by a qualied technician.
- If the product is damaged to such an extent that internal
parts are visible, do NOT plug the product into a mains
outlet and DO NOT switch the unit on. Contact your
dealer. Do NOT connect the product to a rheostat or
dimmer.
- To avoid re and shock hazard, do not expose the
product to rain and moisture.
- All repairs should be carried out by a qualied technician
only.
- Connect the product to an earthed mains outlet (220-
240Vac/50Hz) protected by a 10-16A fuse.
- During a thunderstorm or if the product will not be used
for a longer period of time, unplug it from the mains. The
rule is: Unplug it from the mains when not in use.
- If the oduct has not been used for a longer period of pr
time, condensation may occur. Let the unit reach room
temperature before you switch it on. Never use the
product in humid rooms or outdoors.
- To prevent accidents in companies, you must follow the
applicable guide lines and follow the instructions.
- Do not repeatedly switch the product on and o. This
shortens the life time.
- Keep the product out of the reach of children. Do not
leave the product unattended.
- Do not use cleaning sprays to clean switches. The
residues of these sprays cause deposits of dust and
grease. In case of malfunction, always seek advice from
a specialist.
- Do not force the controls.
- his product is with speaker inside which can cause If t
magnetic eld. Keep the product at least 60cm away
from computer or TV.
- If this product have a built-in lead-acid rechargeable
battery. Please recharge the battery every 3 months if
you are not going to use the product for a long period of
time. Otherwise the battery may be permanently
damaged.
- If the battery is damaged please replace with same
specications battery. And dispose the damaged battery
environment friendly.
- If the product has fallen, always have it checked by a
qualied technician before you switch the product on
again.
- Do not use chemicals to clean the unit. They damage the
varnish. Only clean the product with a dry cloth.
- Keep away from electronic equipment that may cause
interference.
- Only use original spares for repairs, otherwise serious
damage and/or dangerous radiation may occur.
- Switch the product o prior to unplugging it from the
mains and/or other equipment. Unplug all leads and
cables prior to moving the product.
- Make sure that the mains lead cannot be damaged when
people walk on it. Check the mains lead before every use
for damages and faults!
- The mains voltage is 220-240Vac/50Hz. Check if power
outlet match. If you travel, make sure that the mains
voltage of the country is suitable for this product.
- Keep the original packing material so that you can
transport the product in safe conditions.
This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sucient
magnitude to cause a shock hazard.
This mark attracts the attention of the user to important instructions that are contained in the manual and that p2-he should
read and adhere to.
The product has been certied CE. It is prohibited to make any changes to the product. They would invalidate the CE certicate
and their guarantee!
NOTE: To make sure that the product will function normally, it must be used in rooms with a temperature between 5°C/ °F 41 and
35 95°C/ °F .
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your
dealer about the way to proceed The specications are typical. The actual values can slightly change from one unit to the other. .
Specications can be changed without prior notice.
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the product. This would also
invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the
warnings contained in this manual. Vonyx cannot be held responsible for personal injuries caused by a disrespect of the safety
recommendations and warnings. This is also applicable to all damages in whatever form.
3
UNPACKING INSTRUCTION
CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are
present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if
any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing
materials. In the event that the product must be returned to the factory, it is important that the product be returned in the original
factory box and packing.
If the device has been exposed to drastic temperature uctuation (e.g. after transportation), do not switch it on immediately. The
arising condensation water might damage your device. Leave the device switched o until it has reached room temperature.
POWERSUPPLY
On the label on the backside of the produ is indicated on this type of power supply must be connected. Check that the mains ct
voltage corresponds to this, all other voltages than specied, the product can be irreparably damaged. The product must also be
directly connected to the mains and may be used. No dimmer or adjustable power supply.
Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate
electrical ground to avoid the risk of electrocution or re.
OVERVIEW
1. Mode
Turn this knob to select the mode for the on the front LED’s
2. Colour
See table below
3. Sensitivity / Speed
See table below
Function
selector
LED output
description
Sound
controlled
Sensitivity
potentiometer
Mood
Auto change No - -
Meter
"VU meter"
single colour
Yes Colour select -
Mix
"VU meter"
multi colour
Yes - -
Pulse
Strobe Yes Colour select Sound sensitivity
Party
Change No - Speed
4. Mediaplayer
Mediaplayer for playing MP3 songs via USB, SD or BT
technology.
5. Level Mic / Line1
Volume control for the microphone line 1 input. or
6. Level Player / Line 2
Volume control for the player and line 2 input.
7. Treble
Adjust high tone control.
8. Bass
Adjust low tone control.
9. MIC / Line 1 Input
XLR jack input for connecting microphone or audio source with
line level output (e.g. mixer, CD player)
10. RCA Line 2 Input
RCA jack input for connecting audio source with line level
output (e.g. mixer, CD player)
11. Jack 3.5 Line 2 Input
3.5mm (1/8" jack to connect an audio source to line 2. )
12. Link output
XLR jack output for connecting another active loudspeaker.
13. Player / Line 2 Switch
Press this button to select between Player or Line 2 input.
14. LED Power
Indicator lights up when power turned on.
15. Power On/O
Turns the loudspeaker on/o. Make sure the volume knob is set to minimum before turning it on.
16. Power Input
Connect the included power cable to this input and connect the other end of the cable to a power source.

Specyfikacje produktu

Marka: Vonyx
Kategoria: głośnik
Model: LM54

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Vonyx LM54, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje głośnik Vonyx

Vonyx

Vonyx SPJ-1200ABT Instrukcja

7 Października 2024
Vonyx

Vonyx Verve38 Instrukcja

3 Października 2024
Vonyx

Vonyx SPJ-1000ABT Instrukcja

3 Października 2024
Vonyx

Vonyx SPLASH300 Instrukcja

29 Września 2024
Vonyx

Vonyx SL15 Instrukcja

29 Września 2024
Vonyx

Vonyx SL10 Instrukcja

29 Września 2024
Vonyx

Vonyx VX210 Instrukcja

26 Września 2024
Vonyx

Vonyx VSA10P Instrukcja

26 Września 2024
Vonyx

Vonyx Verve46 Instrukcja

23 Września 2024
Vonyx

Vonyx VSA700-BP Instrukcja

22 Września 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Teufel

Teufel Rockster Air Instrukcja

15 Października 2024
Alpine

Alpine PSS-22WRA Instrukcja

15 Października 2024
Bauhn

Bauhn APPS-0724 Instrukcja

15 Października 2024
Aiwa

Aiwa SP-A100 Instrukcja

15 Października 2024
Harman Kardon

Harman Kardon Citation One Instrukcja

14 Października 2024
Alpine

Alpine 30MC Instrukcja

14 Października 2024
Magnat

Magnat Needle 9000 ALU Instrukcja

14 Października 2024
Pioneer

Pioneer SP-T22A-LR Instrukcja

14 Października 2024
Sharp

Sharp PS-932 Instrukcja

14 Października 2024
Pyle

Pyle PDWR64BTW Instrukcja

13 Października 2024