Instrukcja obsługi Vitek VTC-TNB42R3F

Vitek nieskategoryzowany VTC-TNB42R3F

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Vitek VTC-TNB42R3F (30 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/30
VITEK
VITEK
FEATURES
• 1/3” 3.0 Megapixel Progressive Scan CMOS image sensor
• Up to 30fps live view @ 1920x1080 (2MP) / 15fps live
view @ 2048x1536 (3MP)
• Fixed Iris Lens & Varifocal Lens Options
• Up to 150’ IR Range
• Wide Dynamic Range (WDR)
• True Mechanical Day/Night function by ICR
• 3D-DNR Noise Reduction
• Remote Viewing via CMS, Internet Explorer, and iOS &
Android Apps
• Minimal Latency with up to 10 simultaneous user
connections
• On Board Motion Detection
• H.264/MJPEG Dual Streaming
• Onvif Compliance
• IP66 Weather Resistance
• 12VDC & PoE (Power over Ethernet) Operation
IP Camera Series
Transcendent Series 3 Megapixel
Outdoor WDR IP Cameras with
up to 150’ IR Range
Transcendent Series: IP Cameras
1
Please read this manual carefully for correct use of the product.
Notes
! Please use the specified power supply to connect.
! Do not attempt to disassemble the camera; in order to prevent electric shock, do
not remove screws or covers.
! -There are no user serviceable parts inside. Please contact the nearest service
center as soon as possible if there is any failure.
! Avoid incorrect operation, shock vibration, heavy se damage loads which can cau
to the camera.
! Do not use corrosive detergent to clean body of the camera. If necessary, please
use soft dry cloth to wipe dirt; for hard contamination, use neutral detergent. Any
cleanser for high grade furniture is applicable.
! Avoid aiming the camera directly towards extremely bright objects, such as sun, the
this may damage the image sensor.
! Please follow the instructions to install the camera.
! Do not operate it incase temperature; humidity and power supply are beyond the
limited stipulations.
! Keep away from heat sources such as radiators, heat registers, stove, etc.
! Do not expose the product to the direct airflow from an air conditioner.
! We may reserve the rights to amend typographical errors, inconsistencies with the
latest version, software upgrades and product improvements, interpretation and
modification. These changes will be published in the latest version without special
notification.
! The pictures and screenshots in this manual are only used to explain the usage of
our product. The ownerships of trademarks, logos and other intellectual properties
related to Microsoft, Apple and Google belong to the above-mentioned companies.
! This manual is suitable for IR weather-proof network camera. All pictures and
examples used in the manual are for . reference only.
Transcendent Series: IP Cameras
2
Table of Contents
1 IE Remote Access ............................................................................................... 3
1.1 LAN 3...............................................................................................................
1.1.1 Access through IP- Tool ......................................................................... 3
1.1.2 Directly Access through IE 4....................................................................
1.2 WAN .............................................................................................................. 5
2 Remote Preview 6..................................................................................................
2.1 The Remote Preview Interface ...................................................................... 6
2.2 Record Playback ........................................................................................... 7
2.3 Snap Pictures ................................................................................................ 8
3 Remote Configuration ........................................................................................ 9
3.1 System Configuration .................................................................................. 10
3.1.1 Basic Information ................................................................................. 10
3.1.2 Date & Time Configuration .................................................................. 10
3.2 Video Configuration ..................................................................................... 10
3.2.1 Camera Configuration ......................................................................... 11
3.2.2 Video Stream ....................................................................................... 11
3.2.3 OSD Configuration .............................................................................. 12
3.2.4 Video Mask .......................................................................................... 12
3.2.5 ROI Configuration ................................................................................ 13
3.3 Alarm Configuration ..................................................................................... 14
3.3.1 Motion Detection Area ......................................................................... 14
3.3.2 Motion Detection Trigger ..................................................................... 15
3.3.3 Motion Detection Schedule .................................................................. 16
3.4 Network Configuration ................................................................................. 16
3.4.1 Port ...................................................................................................... 16
3.4.2 IP Address ........................................................................................... 17
3.4.3 Server Configuration ............................................................................ 17
3.4.4 IP Notify ............................................................................................... 18
3.4.5 DDNS Configuration ............................................................................ 18
3.4.6 RTSP ................................................................................................... 19
3.4.7 UPnP ................................................................................................... 20
3.4.8 Mail Setting .......................................................................................... 20
3.4.9 FTP ...................................................................................................... 21
3.5 Advanced Configuration .............................................................................. 21
3.5.1 User Configuration ............................................................................... 21
3.5.2 Security Configuration ......................................................................... 23
3.5.3 Configure Backup & Restore ............................................................... 23
3.5.4 Reboot Device ..................................................................................... 24
3.5.5 Upgrade ............................................................................................... 24
4 Q & A .................................................................................................................. 25


Specyfikacje produktu

Marka: Vitek
Kategoria: nieskategoryzowany
Model: VTC-TNB42R3F

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Vitek VTC-TNB42R3F, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje nieskategoryzowany Vitek

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Meec Tools

Meec Tools 010-084 Instrukcja

6 Października 2024
Outwell

Outwell Scenic Road 250 Instrukcja

5 Października 2024
Impact

Impact QuikBalance Instrukcja

4 Października 2024
Impact

Impact CA-112 Instrukcja

4 Października 2024
Impact

Impact LS-BHA Instrukcja

4 Października 2024
Impact

Impact LKB-5C Instrukcja

4 Października 2024
Impact

Impact RST-001 Instrukcja

4 Października 2024