Instrukcja obsługi Vitek VTC-IRV30/2810

Vitek nieskategoryzowany VTC-IRV30/2810

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Vitek VTC-IRV30/2810 (12 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/12
VITEK
1/3” Sony Super HAD II High Resolution Color CCD
550 TV Lines of Resolution
2.8~10mmm / F1.2 Varifocal Auto Iris Lens
30 - 850nm IR LEDs with 100’ Range
0 Lux Operation (IR LEDs On)
IP-66 Rated Water Resistance
Heavy Duty Mount with Cable Feed Through
12VDC/24VAC Dual Voltage Operation
VTC-IRV30/2810
Day/Night IR Bullet Camera w/100’ Range
black
2
Table of contents
1. Safety instructions and Notes 3
2. General Descriptions and Features 4
3. Specifications 5
4. Supplied Items 6
5. Control and Part names 6
6. Installation 7-9
7. Power and Dimensional Drawings 10
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
The symbol is intended to alert the user to the presence of important
operating and maintenance(servicing) instructions in the literature
accompanying the unit.
The symbol is intended to alert the user to the presence of
uninsulated "dangerous voltage" within the product's enclosure that
may be of sufficient magnitude to constitute a risk of electric shock
to persons.
WARNING
black
3
Warning(NTSC version) -- This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses and can radiate radio frequency energy and if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. Operation
of this equipment in a residential area may cause harmful interference in which case the user will be
required to correct the interference at his/her own expense.
Caution -- Any changes or modifications in construction of this device which are not expressly approved by
the party responsible for compliance could void the user's authority to operate the equipment.
1. Safety instructions, cleaning and Notes
• Please read these safety and operating instructions before placing the camera into operation.
• Keep the manual in a safe place for later reference.
Pay attention to safety when laying the connection cable and observe that the cable is not
subjected to heavy loads, kinks or damage and that no moisture can penetrate.
• The unit may only be opened by authorized personnel.
Never open the device and expose boards or lens. If repairs are undertaken by unauthorized
persons the Warranty will be void. If maintenance or repair is required, please call an authorized
service center.
• Use only a mild detergent to clean the housing.
• Keep the window surface clean from the dirt or dust, which may reflect the infrared light into the
lens at night.
Caution
To prevent electric shocks
and risk of fire hazards, do
NOT use other than specific
power source.


Specyfikacje produktu

Marka: Vitek
Kategoria: nieskategoryzowany
Model: VTC-IRV30/2810

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Vitek VTC-IRV30/2810, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje nieskategoryzowany Vitek

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Meec Tools

Meec Tools 010-084 Instrukcja

6 Października 2024
Outwell

Outwell Scenic Road 250 Instrukcja

5 Października 2024
Impact

Impact QuikBalance Instrukcja

4 Października 2024
Impact

Impact CA-112 Instrukcja

4 Października 2024
Impact

Impact LS-BHA Instrukcja

4 Października 2024
Impact

Impact LKB-5C Instrukcja

4 Października 2024
Impact

Impact RST-001 Instrukcja

4 Października 2024