Instrukcja obsługi Vitek VTC-C2BHSE

Vitek Kamera monitorująca VTC-C2BHSE

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Vitek VTC-C2BHSE (32 stron) w kategorii Kamera monitorująca. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/32
FEATURES:
• 1/3” Panasonic Progressive Scan CMOS Sensor
• 2.1MegaPixel With full 1080p/720p HD-SDI (SMPTE 292M) / EX-SDI
Output
• Smart Motion Zoom tracks motion, then intelligently zooms into that area of
the frame
• True Day/Night with Dual Filter Switch
• Small scale design to fit in 5” dome enclosures such as the Pelco® DF5
Housing
• Secondary Video (CVBS) Output
• Fully programmable True WDR (Dual Scan) at 30fps
• Sensitivity of 0.0005 Lux
• Advanced OSD Functions: Smart Motion Zoom, Focus Assist, Motion
Detection, Privacy Mask, Defog, D-Zoom(~8x), Sens-up (~x32), BLC/ HLC,
Title Set, Pixel Defect Compensation, Lens Shade Compensation
• 100% Pure Digital Transmission of video data
• Extended Range Beyond 1000’ with RG59U 95% Copper Braid Coax
• 12VDC / 24VAC Dual Voltage Operation
VTC-C2BHSE
2.1MP EX-SDI/HD-SDI Smart
WDR Camera
VITEK
VITEK
Safety Precaution
CAUTION: TO REDUCE THE RISK OF ELECTICAL
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
To prevent electrical shock and risk of fire hazards, do not expose this unit
to rain or moisture and only use specified power source..
Warning :
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
their own expense.
Caution :
Any changes or modifications in construction of this device which are not expressly
approved by the party responsible for compliance could void the user's authority
to operate the equipment.
Main power quality should be that of a typical commercial environment. If the user
of the model requires continued operation during power interruptions, it is
recommended that the device be powered from an uninterruptible power supply
(UPS).
The symbol is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature
accompanying the unit.
The symbol is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electrical shock.
2
Safety Precaution
NOTICE
• The image used in this instruction manual are processed to help
comprehension and may differ from actual video of the camera.
• Avoid installing in areas where shock or vibration may occur.
• Pay attention to safety when running the connection cables and
make sure that the cables are not subject to heavy loads, kinks,
moisture or damage.
• Never open the device (no user serviceable parts inside). The
warranty becomes void if repairs are undertaken by
unauthorized persons.
• Maintenance and repair have to be carried out only by authorized
service centers.
• Use only a mild detergent to clean the housing.
• The camera should never be operated beyond the technical
specifications. This can lead to damaging the device and void
the warranty.
• The camera should never be operated in water.
3

Specyfikacje produktu

Marka: Vitek
Kategoria: Kamera monitorująca
Model: VTC-C2BHSE

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Vitek VTC-C2BHSE, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Kamera monitorująca Vitek

Vitek

Vitek VTC-C2BHSE Instrukcja

3 Września 2024

Instrukcje Kamera monitorująca

Najnowsze instrukcje dla Kamera monitorująca

I-PRO

I-PRO WV-U2542LA Instrukcja

11 Grudnia 2024
I-PRO

I-PRO B-200-PTZ Instrukcja

11 Grudnia 2024
I-PRO

I-PRO WV-U2130LA Instrukcja

11 Grudnia 2024
ClearOne

ClearOne Unite 260 Pro Instrukcja

11 Grudnia 2024
I-PRO

I-PRO WV-X35402-F2LM Instrukcja

11 Grudnia 2024
Imou

Imou Cubo1 Instrukcja

11 Grudnia 2024
Foscam

Foscam PD5 Instrukcja

10 Grudnia 2024
TP-Link

TP-Link InSight S245 Instrukcja

10 Grudnia 2024
Foscam

Foscam R8M Instrukcja

10 Grudnia 2024
AViPAS

AViPAS AV-2000W Instrukcja

10 Grudnia 2024