Instrukcja obsługi Vitek VTC-BHOC6R4F


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Vitek VTC-BHOC6R4F (31 stron) w kategorii kamera bezpieczeństwa. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/31
External OSD
Controls
for Ease of
installation
VITEK
FEATURES:
1/3” 2.1 MegaPixel Progressive Scan CMOS sensor w/
NVP2420 DSP
2.1 MegaPixel With full 1080p 3G-SDI (SMPTE 424M) @
60fps / 30fps HD-SDI (SMPTE 292M) @ 30fps Output
30 850nm Dynamic Intensity IR LEDs with 115’ Range
MegaPixel IR Corrected 3.6mm Fixed Iris lens Included
Mechanical IR Cut Filter (True Day/Night)
XD-DNR (2D-DNR + 3D-DNR) Noise Reduction
16:9 Video format
Advanced OSD Functions: Defog, Dynamic IR, WDR,
Motion Detection, Privacy mask, Mirror, BLC/HLC, D-Zoom
100% Pure Digital Transmission of video data
Up to 700’ HD Transmission Range (Depending on cable
characteristics and integrity)
IP67 Weather Resistance
12VDC Operation
VTC-BHOC6R4F
2.1MP 3G-SDI IP67 Vandal Resistant WDR True
Day/Night Bullet Camera with 3.6mm Lens &
30 IR LEDs
2
WARNINGS
The camera needs periodic inspection.
Contact an authorized technician for inspection.
Stop using camera if there is a malfunction.
Avoid installing camera in high heat areas, risk of fire may occur.
Do not install the camera on a surface that can not support it.
Unless the surface is suitable, injury or other hazards may occur.
Do not disassemble the camera.
It may result in fire, electric shock or other hazards.
Do not hold plug with wet hands.
It could cause an electric shock.
Do not use the camera close to a gas or oil leak.
It may result in fire or hazards.
3


Specyfikacje produktu

Marka: Vitek
Kategoria: kamera bezpieczeństwa
Model: VTC-BHOC6R4F

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Vitek VTC-BHOC6R4F, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje kamera bezpieczeństwa Vitek

Instrukcje kamera bezpieczeństwa

Najnowsze instrukcje dla kamera bezpieczeństwa