Instrukcja obsługi Vitek VT-3527 BK

Vitek budzik radiowy VT-3527 BK

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Vitek VT-3527 BK (24 stron) w kategorii budzik radiowy. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/24
1
Радиочасы
VT-3527 BK
Clock radio
3
11
7
15
19
VT-3527.indd 1 27.12.2013 14:42:29
VT-3527.indd 2 27.12.2013 14:42:30
3
ENGLISH
CLOCK RADIO
The clock radio is intended for time indication, receiving
of radio signal in AM and FM range and for usage as an
alarm clock.
Description
1. «SNOOZE/SLEEP» alarm repeating signal/radio auto
switch-off button
2. Settings change button / MONTH/DAY / °C/°F ◄◄
3. Infrared remote sensors
4. Settings change button /YEAR/DST►►
5. On/off button
6. Projector
7. Band switching button «ban
8. First alarm on and alarm signal selection button
«AL.1»
9. Second alarm on and alarm signal selection button
«AL.2»
10. «AL.set» alarm setting button
11. Date and time setting button «mode»
12. Focus adjustment «FOCUS»
13. Display
14. Speaker
15. Radio station tuning control «tuning»
16. Volume level control «- volume +»
17. Display brightness control «display dimmer»
18. Button of projected image rotation to 180 degrees
«180° flip»
19. Projector on/off button «on/off»
20. Battery compartment lid
21. “RESET” button
22. FM-antenna cord
23. Label
24. Temperature sensor (for indoor use only)
25. Power cord
Warning!
ELECTRIC SHOCK HAZARD
DO NOT OPEN
Warning: To avoid the risk of fire or electric shock,
do not expose the unit to rain or moisture. To pre-
vent the risk of electric shock, do not open the hous-
ing by yourself. The device’s technical maintenance
should be performed by service centers’ qualified
specialists only.
The lightning symbol within an equilateral
triangle is intended to alert the user to the
presence of dangerous voltage within the
product’s housing that may lead to an elec-
tric shock.
The exclamation mark within an equilat-
eral triangle points to important operating
and maintenance recommendations in the
instruction manual.
SAFETY MEASURES
Read this instruction manual carefully before using the
unit and keep this manual for the whole operation period.
Mishandling the unit can lead to its breakage and cause
harm to the user or damage to his/her property.
To reduce the risk of fire, to prevent electric shock or
other injuries, it is necessary to observe the following
safety measures when using the unit.
Make sure that unit operating voltage corresponds
to the voltage of your mains.
To avoid risk of fire or electric shock, do not expose
the unit to rain or moisture.
Do not immerse the unit, the power cord and the
power plug into water or any other liquids.
To prevent fire or electric shock, do not use this
unit in places with high humidity (near bath tubs,
containers filled with water, kitchen sinks, wash-
ing machines, near a swimming pool, in wet base-
ments, etc.)
Protect the unit from drips and splashes.
Do not overload mains sockets or extension cords,
as this can result in fire or electric shock.
Place the unit in such a way that you can immedi-
ately pull out the plug from the socket in case of any
malfunction.
For additional protection of the unit, unplug it dur-
ing lightning storms and in cases when you are not
going to use clock radio for a long time. It will prevent
the unit from being damaged by lightning and power
surges in the mains.
Install the unit on flat surface in places with proper
ventilation. Do not block the ventilation openings of
the device.
Place the unit on a flat stable surface, away from
equipment with strong magnetic field, for example,
from video and audio recorders or big speakers, as
magnetic electric field lines from these devices may
cause interference in the unit operation.
Do not connect the FM-antenna to an external
antenna.
Do not place the clock radio near heat sources
such as radiators, heat registers, stoves or in
places exposed to direct sunlight, excessive dust,
vibration or mechanical shocks. It is prohibited to
place sources of open fire, such as candles on
the unit.
Do not let foreign objects get into the device open-
ings.
Do not let the power cord hang from the edge of a
table, and make sure that the power cord does not
touch sharp furniture edges and hot surfaces. When
unplugging the unit from the mains, pull the power
plug but not the cord.
Do not connect, disconnect or touch the power cord
or the power plug with wet hands, this may cause
electric shock.
Do not use the unit if the power cord or the power
plug is damaged, if the unit malfunctions, if it was
dropped or damaged in any other way.
VT-3527.indd 3 27.12.2013 14:42:30


Specyfikacje produktu

Marka: Vitek
Kategoria: budzik radiowy
Model: VT-3527 BK
Kolor produktu: Czarny
Długość przekątnej ekranu: 0.8 "
Funkcja alarmu: Tak
Radio: Zegar
Termometr: Tak
Radio FM: Tak
Pasmo AM: 525 - 1600 kHz
Pasmo FM: 87.5 - 108 MHz
Wyłącznik czasowy: Tak
Typ tunera: Analogowy
Funkcja projekcji: Czas

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Vitek VT-3527 BK, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje budzik radiowy Vitek

Instrukcje budzik radiowy

Najnowsze instrukcje dla budzik radiowy

Hama

Hama RC 540 Instrukcja

15 Stycznia 2025
Magnum

Magnum DW166 Instrukcja

15 Stycznia 2025
Tesco

Tesco DCR1701 Instrukcja

15 Stycznia 2025
Magnum

Magnum DW167 Instrukcja

15 Stycznia 2025
Philips

Philips AJ3116 Instrukcja

15 Stycznia 2025
Philips

Philips AJ3720 Instrukcja

15 Stycznia 2025
Philips

Philips AJ1003 Instrukcja

15 Stycznia 2025
Tesco

Tesco DR1403B Instrukcja

14 Stycznia 2025