Instrukcja obsługi Vision TC3-AMP

Vision Receiver TC3-AMP

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Vision TC3-AMP (11 stron) w kategorii Receiver. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/11
1
TC3- AMP_manual_en
TECHCONNECT AMPLIFIER
OWNERS MANUAL
www.visionaudiovisual.com/techconnect/tc3-amp
2
TC3- AMP_manual_en
DECLARATION OF CONFORMITY
Where applicable Vision products are certified and comply with all known local regulations t o a
‘CB Certification’ standard. Vision commits to ensure all products are fully compliant with all
applicable certification standards for sale in the EU and other participating countries.
The product described in this owner manual is in compliance with RoHS (EU directive
2002/95/EC), and WEEE (EU directive 2002/96/EC) standards. This product should be returned to
the place of purchase at the end of its useful life for recycling.
WARNINGS
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user
to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle, is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in the literature accompanying the
appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
All products are designed and imported into the EU by ‘Vision’ who is wholly owned by ‘Azlan
Logistics Ltd.’, Registered in England Nr. 04625566 at Lion House, 4 Pioneer Business Park,
Clifton Moor, York, YO30 4GH. WEEE Registration: GD0046SY
DECLARATION OF ORIGIN
All Vision products are made in the People’s Republic of China (PRC).
3
TC3- AMP_manual_en
USE ONLY DOMESTIC AC OUTLETS
Connecting the unit to an outlet supplying a higher voltage may create a fire hazard.
HANDLE THE POWER CORD WITH CARE
Do not disconnect the plug from the AC outlet by pulling the cord; always pull the plug itself.
Pulling the cord may damage it. If you do not intend to use your unit for any considerable length
of time, unplug the unit. Do not place furniture or other heavy objects on the cord, and try to
avoid dropping heavy objects on it. Do not tie a knot in the power cord. Not only could the cord
be damaged, but a short circuit could also be caused with a consequent fire hazard.
PLACE OF INSTALLATION
Avoid installing this product under the following conditions:
• Moist or humid places
• Places exposed to direct sunlight or close to heating equipment
• Extremely cold locations
• Places subject to excessive vibration or dust
• Poorly ventilated places
Do not expose this product to dripping or splashing. DO NOT PLACE OBJECTS FILLED WITH
LIQUIDS ON OR NEAR THIS PRODUCT!
MOVING THE UNIT
Before moving the unit, be sure to pull out the power cord from the AC outlet and disconnect the
interconnection cords with other units.
WARNING SIGNS
If you detect an abnormal smell or smoke, turn this product off immediately and unplug the
power cord. Contact your reseller or Vision.
PACKAGING
Save all packing material. It is essential for shipping in the event the unit ever needs repair.
IF ORIGINAL PACKAGING IS NOT USED TO RETURN THE UNIT TO THE SERVICE CENTRE,
DAMAGE IN TRANSIT WILL NOT BE COVERED BY WARRANTY.
WATTS
The most consistent standards for measuring watts are “Program Power” and “RMS” because
these measure average sustained levels.
Amplifier power output changes depending on how many loudspeakers are connected.
Professional manufacturers typically quote output based on 8 ohms. Less reputable
manufacturers quote at 4 ohms to make their product seem more powerful.
This amplifier has an output of:
2 x 25w (sometimes referred to as 50w) @ 8 ohms (two loudspeakers connected)
2 x 50w (sometimes referred to as 100w) @ 4 ohms (four loudspeakers connected)

Specyfikacje produktu

Marka: Vision
Kategoria: Receiver
Model: TC3-AMP

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Vision TC3-AMP, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Receiver Vision

Vision

Vision AV-1700+ Instrukcja

3 Października 2024
Vision

Vision AV-1900 Instrukcja

3 Października 2024
Vision

Vision TC2-AMP4 Instrukcja

3 Października 2024
Vision

Vision TC2-AMP3 Instrukcja

3 Października 2024
Vision

Vision AV-1500 Instrukcja

3 Października 2024
Vision

Vision TC3-AMP Instrukcja

3 Października 2024

Instrukcje Receiver

Najnowsze instrukcje dla Receiver

August

August WR320 Instrukcja

3 Października 2024
August

August MR280 Instrukcja

3 Października 2024
August

August MR410 Instrukcja

3 Października 2024
August

August MR250 Instrukcja

3 Października 2024
Phoenix Gold

Phoenix Gold Z300.4 Instrukcja

3 Października 2024
Audiotec Fischer

Audiotec Fischer M ONE Instrukcja

3 Października 2024