Instrukcja obsługi Viper XpressKit 653T Diode

Viper Zdalne sterowanie XpressKit 653T Diode

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Viper XpressKit 653T Diode (2 stron) w kategorii Zdalne sterowanie. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
Diode FAQ
Published 05/05/2006 08:15 PM | Updated 07/18/2014 08:03 AM
How do diodes work, and what are they used for ?
Diodes are an electrical device which are used to isolate current flow by controlling (blocking or passing) its flow.
Diodes introduce a 0.7 volt drop in voltage to the circuit in which they are installed. There is a band, or stripe, on one
end of the diode, which is used to identify its polarity. The direction that it will be oriented will depend on the
polarity of the system involved:
For the most part, the only times you will need to use a diode will be in conjunction with an alarm install or when
building delay circuits. We recommend any IN4000 series diodes, which are typically rated for 1 amp. Some
examples of use with an alarm install are:
Using Diodes To Isolate Between Multiple Negative(-) Door Triggers
Using Diodes To Isolate Between Multiple Positive(+) Door Triggers
Using Diodes To Isolate Between Hood And Trunk Pin Switches
Using Diodes To Interface With Separate Left And Right Parking Light
Circuits
Using Diodes To Isolate Between Multiple Sensors


Specyfikacje produktu

Marka: Viper
Kategoria: Zdalne sterowanie
Model: XpressKit 653T Diode

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Viper XpressKit 653T Diode, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Zdalne sterowanie Viper

Instrukcje Zdalne sterowanie

Najnowsze instrukcje dla Zdalne sterowanie