Instrukcja obsługi Viotek GN32C

Viotek monitor GN32C

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Viotek GN32C (11 stron) w kategorii monitor. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/11
CURVED GAMING MONITOR
USER MANUAL
VIOTEK
Read and observe the following warnings and informaon below.
Safety Precauons and Maintenance
1. Before cleaning, always unplug your monitor. It is recommended to use dry
cloth or lightly damp cloth to clean your monitor. Dry cloth is, however, the
safest. If using damp cloth, wait for your monitor to completely dry before
plugging it in again.
2. Do not use alcohol or ammonia-based cleaner and/or liquids to clean your
monitor.
3. This monitor features venlaon openings on the back of the unit. Avoid
blocking these openings to prevent the monitor from overheang.
4. Avoid placing this monitor near any heat sources e.g: portable heaters or
heang vents, as this may cause damage to your monitor.
5. Do not spray cleaner and or any kind of liquid directly onto the monitor's screen
or any part of the monitor.
6. Do not insert anything into any part of the monitor especially the venlaon
openings.
7. Always make sure your monitor is placed on a secure, level surface to
prevent it from falling and sustaining damage.
8. Unplug your monitor during any extended periods of non-use.
9. Do not place heavy items on the monitor or monitor cables.
10. Do not aempt to dissemble the monitor or remove parts from monitor.
Any disassembly or modificaon etc. not performed by an authorized
technician can result in damage to the monitor and/or possible exposure to
high voltage electricity which may lead to serious injury or death.
Viotek shall not be held responsible for injury or damage of products or persons
due to failure to adhere to the aforemenoned precauons or any others noted
hereaer.
All specificaons and informaons are subject to change without noce.
-1-
DVI Connector HDMI Connector DP Connector
Indicator Light
AC IN Connector
Box Contents
1x Monitor
1x Power Cable (AC 100-240V 50/60Hz)
1x HDMI Cable
1x User manual
Basic Setup
1. Insert one end of the VGA video cable into your PC's graphics card. DVI, HDMI, or
display port (DP) may also be used. These cables are not included.
Note: For opmal refresh rate (or "performance") at 144hrz, it is recommended to
use a Display Port (DP) or DVI-D dual link cable with the monitor's corresponding
connector.
2. Connect the other end of the video cable to the corresponding connector on
your monitor. See the image below.
3. Connect the power cable to your monitor then connect the other end to your
power source such as a wall outlet or surge protector. It is recommended to
use a surge protector.
4. Locate the power buon on the monitor and press it to turn the monitor on.
Note: If you cannot locate the power buon, please refer to the Control Panel
Secon on the next page.
If desired, you can use the monitor's FreeSync feature. The feature itself is on by
default. In order to use this feature, please note you must have hardware with
FreeSync capability, a DP, and the latest graphic drivers. To use FreeSync, connect
the appropriate cable to the DP connectors on both the computer and the monitor.
Aer connecng, you will receive a prompt to enable FreeSync on your computer.
Indicator Light
This light is located on the front of the monitor.
Solid blue light indicates power is on and the monitor is operang normally.
Flashing blue light indicates no video source has been detected. Please ensure your
PC is on and all video cables are fully inserted and/or connected.
Connectors in this graphic are not to scale. Also the small numbers inside the DVI and HDMI graphics can
be removed.
All specificaons and informaons are subject to change without noce.
-2-

Specyfikacje produktu

Marka: Viotek
Kategoria: monitor
Model: GN32C

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Viotek GN32C, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje monitor Viotek

Viotek

Viotek NB32CW Instrukcja

2 Października 2024
Viotek

Viotek GN32LD Instrukcja

2 Października 2024
Viotek

Viotek GN32C Instrukcja

2 Października 2024
Viotek

Viotek GN35LD Instrukcja

2 Października 2024
Viotek

Viotek GFV24CB2 Instrukcja

2 Października 2024
Viotek

Viotek NB27C Instrukcja

2 Października 2024
Viotek

Viotek GN34CW Instrukcja

2 Października 2024

Instrukcje monitor

Najnowsze instrukcje dla monitor

Acer

Acer EB321HQUDbmidphx Instrukcja

15 Października 2024
Bauhn

Bauhn APMTR-0624 Instrukcja

15 Października 2024
Acer

Acer KA270H Instrukcja

14 Października 2024
Acer

Acer K272HUL Dbmidpx Instrukcja

14 Października 2024
NEC

NEC E424 Instrukcja

14 Października 2024
LG

LG UltraGear 32GS85Q Instrukcja

14 Października 2024
LG

LG UltraGear 27GS85Q Instrukcja

14 Października 2024
Acer

Acer EK220QB Instrukcja

13 Października 2024
Acer

Acer S242HL Instrukcja

12 Października 2024