Instrukcja obsługi Viomi Alpha S9 UV
Viomi
odkurzacz robotyczny
Alpha S9 UV
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Viomi Alpha S9 UV (16 stron) w kategorii odkurzacz robotyczny. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/16
Please read this manual carefully before use and keep it properly.
This product shall be operated only in location at altitude below 2,000 meters.
Please read this manual carefully to ensure proper and safe use of the product.
Viomi Robot Vacuum S9 UV-Automatic Dirt Disposal
User Manual
Considerations
Operation Restrictions
• This product shall be used only for cleaning of ground surface in
residential house, but not for outdoors, other surface (e.g. couch) or
commercial or industrial environment.
• Do not use this product in environment without guardrail, such as
duplex, open balcony, and top of furniture.
• Do not use this product in temperature higher than 40℃ or lower
than 0 or on ground surface with any liquid or viscous maer.
• Before operating this product, handle any wire/cable on ground surface
to avoid it being wound by main machine.
• Remove any fragile article and sundries on ground surface, such as vase
or plastic bag, to avoid it from being impacted and damaged by main
machine.
• Do not allow any person with physical, mental or sensual disorder
(including children) to use or operate this product.
• Do not allow children to play the main machine. Keep children or pet
staying away from the main machine during operation.
• Do not place any object or sit on the main machine which is
stationary or in movement.
• Do not use this product to clean any object which is burning (e.g. burning
cigaree end).
• Do not use this product for cleaning of carpet.
• Do not use this product to suck up any hard or sharp object, such as
scrap, glass, and iron nail.
• Do not handle this product by the protective cover of laser radar as
handle.
Be sure to clean main machine and charging dock only when this
product is power-off or the power supply is disconnected.
• Do not splash any liquid into this product, except the automatic dirt
disposal, which can be cleaned.
• Do not put main machine upside down, and do not place laser radar
on the ground.
• Do not use the vacuum-mop to clean the carpet.
• Use this product by following the instructions or quick start guide.
User shall be responsible for any loss or injury resulting from improper
use.
Baery and Charging
• Do not use any third-party baery, power adapter and charging dock.
• Do not use any non-rechargeable baery.
• Do not dismantle, repair, refit the baery or charging dock.
• Do not place charging dock close to any heat source, for example,
heating radiator, nor use wet cloth or liquid to clean any part of this
product.
• Do not throw any waste baery randomly. It is recommended to have any
specialist agency dispose it.
• To transport this product, be sure to power it off and use the original
packaging box to provide protection for it.
• If this product is to be idle for a long time, charge the baery to full
level and store it at dry and cool location. Recharge it at least monthly
to avoid damage to baery.
• Use a proper tool to remove the baery. First remove the screw on
the boom cover, and then remove the cover, unplug the baery
connecting terminal and take the baery out. Before disposing the
robot, you have to take the baery out of it. When removing the
baery, the robot must be powered off.
This product is in compliance with Class-1 laser safety standard
under IEC60825-1:2014, and will not generate laser radiation
hazardous to human.
01
02
Product Introduction
Smart recharging
Reset buon: for forcible shutdown.
Power on/off Global sweeping
IR sensor
When the robot is power-on,
simultaneously press down and
hold and keys for 5 seconds
till a voice prompt is given, and then
release them to activate network
configuration.
When the robot is power-on,
simultaneously press down and
hold and keys for 10 seconds
till a voice prompt is given, and keep
holding the keys for 10 seconds to
finish recovery to factory seings.
Network Configuration The light is constantly on in blue color,
indicating successful connection/normal
operation/standby state．
Flicker in blue color, indicating power-on.
Flash slowly in blue color, indicating firmware
upgrade/recovery to factory seing.
Flash fast in blue color, indicating network
configuration.
Flicker in red color, indicating low baery level.
Flash fast in red color, indicating fault in
operation.
The LED indicator goes out, indicating
power-off/sleep.
Short press (for less than 3 seconds) to switch off.
Short press the buon to start/cease sweeping.
Long press the buon for 3 seconds to power
on/off.
Short press the buon to start smart
recharging.
The LED indicator keeps flash slowly in yellow
color, indicating recharging/ low baery level.
Flicker in yellow color, indicating recharging.
Specyfikacje produktu
| Marka: | Viomi |
| Kategoria: | odkurzacz robotyczny |
| Model: | Alpha S9 UV |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Viomi Alpha S9 UV, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje odkurzacz robotyczny Viomi
22 Września 2024
Instrukcje odkurzacz robotyczny
Najnowsze instrukcje dla odkurzacz robotyczny
17 Września 2024