Instrukcja obsługi Viewsonic ViewPad E72

Viewsonic Tabletki ViewPad E72

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Viewsonic ViewPad E72 (45 stron) w kategorii Tabletki. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/45
ViewPad E72
User Guide
Guide de l’utilisateur
Guía del usuario
Guia do usuário
Model No. VS14905
i
Compliance Information
FCC NOTICE
The following statement applies to all products that have received FCC approval.
Applicable products bear the FCC logo, and/or an FCC ID in the format FCC ID: GSS-
VS14905 on the product label.This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation. This mobiledevice has
been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequencyenergy and, if not installed and used
in accordance with the instructions, may cause harmful interferenceto radio
communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void theuser’s authority to operate the equipment. The antenna(s)
used for this transmitter must not be colocated or operating in conjunction with any
otherantenna or transmitter.
FCC SAR information
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth an
uncontrolled environment. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
The device was tested and complies to measurement standards and procedures
specified in FCC OET Bulletin 65, Supplement C
RF Exposure Information (SAR)
This device meets the government’s requirements for exposure to radio waves.
This device is designed and manufactured not to exceed the emission limits for
exposure to radio frequency (RF) energy set by the Federal Communications
Commission of the U.S. Government.
The exposure standard employs a unit of measurement known as the Specific
Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. Tests for SAR
are conducted using standard operating positions accepted by the FCC with the EUT
transmitting at the specified power level in different channels.
The highest SAR value for the device as reported to the FCC is . W/kg when
placed next to the body.
5390
ii
The FCC has granted an Equipment Authorization for this device with all reported
SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR
information on this device is on file with the FCC and can be found under the Display
Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: GSS-VS14905.
Canada Statement
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-003.
The County Code Selection feature is disabled for products marketed in the US/
Canada. For product available in the USA/ Canada markets, only channel 1~11 can
be operated. Selection of other channels is not possible.
IMPORTANT NOTE:
IC Radiation Exposure Statement
This EUT is compliance with SAR for general population/uncontrolled exposure limits
in IC RSS-102 and had been tested in accordance with the measurement methods
and procedures specified in IEEE 1528.


Specyfikacje produktu

Marka: Viewsonic
Kategoria: Tabletki
Model: ViewPad E72
Kolor produktu: Czarny
Wbudowany wyłącznik: Tak
Częstotliwość wejściowa AC: 50/60 Hz
Napięcie wejściowe AC: 230 V
Wysokość produktu: 44 mm
Szerokość produktu: 483 mm
Głębokość produktu: 414 mm
Waga produktu: 6400 g
Technologia łączności: Przewodowa
Impedancja: 8 Ω
Certyfikaty: CE, UL, CAN/CSA C22.2 No. 60065-16, CB, FCC, ICES-003, EN55032, EN55103-2:2009, CISPR 13: Ed. 5.0 (2009-06), CISPR-32
Przeznaczenie: Przedstawienie/scena
Ilość portów Ethernet LAN (RJ-45): 1
Pobór mocy w trybie czuwania: 14 W
Kanały wyjścia audio: 4.0 kan.
Liczba portów USB 2.0: 1
Pobór mocy: 700 W
Waga wraz z opakowaniem: 7800 g
Diody LED: Tak
Rodzaj chłodzenia: Aktywne
Maksymalne natężenie prądu: 8.04 A
Moc szczytowa na kanał: 600 W
Współczynnik zawartości harmonicznych: 0.04 %
Stosunek sygnału do szumu: 100 dB
Zasięg częstotliwości: 20 - 20000 Hz
Impedancja wejściowa: 20000 Ω
Przesłuch (1 kHz): 85 dB
Filtr górnoprzepustowy: Tak
Funkcje ochrony zasilania: Over voltage,Overheating,Under voltage
Kanały wejściowe audio: 4.0
Zakres filtru górnoprzepustowego: 0 - 50 Hz

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Viewsonic ViewPad E72, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą