Instrukcja obsługi VideoComm MX-5847VF

VideoComm Bewakingscamera MX-5847VF

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla VideoComm MX-5847VF (12 stron) w kategorii Bewakingscamera. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/12
MXR-5842-47 Series Manual Rev. C 2010
1
# MX-5842c # MXR-5842c
# MX-5847VF # MXR-5847VF
5.8GHz Wireless Camera Series
It’s About Real-Time
OWNER’S MANUAL
VideoComm Technologies
(888) 379-2666 US Toll Free
(905) 339-0366 Phone
(905) 339-1776 Fax
http://www.VideoTransmitters.com/
info@VideoTransmitters.com
MXR-5842-47 Series Manual Rev. C 2010
2
TABLE OF CONTENTS
TABLE OF CONTENTS.............................................................................. 2
SAFETY NOTICES ...................................................................................... 2
INTRODUCTION ......................................................................................... 3
PARTS LIST.................................................................................................. 4
SYSTEM SETUP........................................................................................... 5
Camera Power Supply Options .................................................................................................................. 5
Channel Selection.......................................................................................................................................6
Receiver Setup ............................................................................................................................................7
Camera Bracket Mounting - Ceilling .........................................................................................................8
Camera Bracket Mounting - Wall ..............................................................................................................9
TIPS & TROUBLE SHOOTING .............................................................. 10
SPECIFICATIONS ..................................................................................... 11
WARRANTY INFORMATION/ TERMS & CONDITIONS ................ 12
SAFETY NOTICES
I. THIS DEVICE COMPLIES WITH FCC RULES PART 15.249 OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITONS:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference, including interference that
may cause undesired operation of the device
II. In order to comply with the FCC/IC adopted RF exposure requirements, this transmission system will be installed by an
authorized professional installer of VideoComm Technologies. Installation of all antennas must be performed in a manner
that will provide at least 23cm clearance from the front radiating aperture, to any user or member of the public.
III. This is NOT an intrinsically safe device. Do not take into area where intrinsic safety is required. Bodily harm may result if
warning is ignored.
IV. DO NOT OPERATE WIRELESS CAMERA WITHOUT ANTENNA CONNECTED TO ANTENNA PORT. Failure to do
so will result in damage to the unit and void the warranty.
V. DO NOT OPERATE THE WIRELESS CAMERA WHEN the Receiver is closer than ten feet. The devices may not work
properly and permanent damage can occur.
VI. The device has been certified by the FCC for use with other products without any further certification (as per FCC section
2.1091.) Changes or modifications not expressly approved by VideoComm Technologies could void the user’s authority to
operate the equipment.
The term “IC:” before the radio certification number only signifies that Industry Canada
Technical specifications were met.
MXR-5842-47 Series Manual Rev. C 2010
3
INTRODUCTION
Introduction
ALL NEW 5.8GHz wireless camera series offers an economical solution for real-time, high resolution
wireless video applications, that's not susceptible to interference from 2.4GHz 802.11 b/g data devices.
Featuring 8 user selectable channels, this wireless camera is an ideal choice when multiple wireless video
links are required for any portable, temporary or covert surveillance and monitoring applications. Perfect for
any indoor camera application including, oce, warehouse, retail stores or nursery.
Advantages
• Easy to install and operate with all accessories included
• 8 user selectable channels
• NO interference from 2.4GHz 802.11 b/g data devices
• 5.8GHz low profile desktop receiver included with some models.
• High resolution CCD camera
• Low current consumption for convenient battery operation
• Range up to 300 feet indoors
• One Year Limited Warranty
• RoHS compliant models available upon request.
• Ideal for portable, temporary and covert surveillance or monitoring applications
VideoComm Technologies
Customer Service
Bus (905)-339-0366
US Toll Free 888-379-2666
Fax (905)-339-1776
E-mail- info@VideoTransmitters.com
Web Site- www.VideoTransmitters.com
Monday - Friday 8:30am- 5:30pm
Eastern Standard Time

Specyfikacje produktu

Marka: VideoComm
Kategoria: Bewakingscamera
Model: MX-5847VF

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z VideoComm MX-5847VF, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Bewakingscamera VideoComm

VideoComm

VideoComm MX-5847VF Instrukcja

19 Września 2024
VideoComm

VideoComm ZX-700SR105 Instrukcja

17 Września 2024

Instrukcje Bewakingscamera

Najnowsze instrukcje dla Bewakingscamera

Axis

Axis Q8632-E Instrukcja

20 Września 2024
Axis

Axis P1354-E Instrukcja

20 Września 2024
Pelco

Pelco Sarix Enhanced IME839-1ERS Instrukcja

19 Września 2024
EtiamPro

EtiamPro ECAMTVI101 Instrukcja

19 Września 2024
Axis

Axis Q6075-E Instrukcja

19 Września 2024
EverFocus

EverFocus EBN288 Instrukcja

19 Września 2024
EverFocus

EverFocus EHN2550 Instrukcja

19 Września 2024
EverFocus

EverFocus ESD100 Instrukcja

19 Września 2024
Aigis

Aigis D5CH211P-W Instrukcja

19 Września 2024
EverFocus

EverFocus EBD930F Instrukcja

19 Września 2024