Instrukcja obsługi Victron Energy Automotive IP65


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Victron Energy Automotive IP65 (72 stron) w kategorii Ładowarka baterii. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/72
Manual
EN
Handleiding
NL
Manuel
FR
Anleitung
DE
Manual
ES
Användarhandbok
SE
Appendix
Automotive IP65 Charger 12V/4A – 12V/0,8A
2
3
EN NL FR DE ES SE
1. Introduction
This charger has been designed for charging a variety of 12V
lead acid batteries, such as WET, GEL and AGM, which are
widely used for cars, motorcycles and other vehicles. Battery
capacities range from 1,2Ah to 120Ah. Full protection against
reverse polarity and short-circuiting ensures that the charging
operation is much safer. The charger will wait until a charging
mode has been selected before a connected battery can be
charged.
2. Indicator panel
LED
STATE
STANDBY
Standby, or stopped due to bad connection
<14Ah Mode 1 (14,4V/0,8A) selected
>14Ah Mode 2 (14,4V/4A ) selected
COLD Mode 3 (14,7V/4A ) selected
!
Reverse connection detected, check polarity
CHARGE Battery is being charged
FULL Battery fully charged


Specyfikacje produktu

Marka: Victron Energy
Kategoria: Ładowarka baterii
Model: Automotive IP65

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Victron Energy Automotive IP65, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Ładowarka baterii Victron Energy

Instrukcje Ładowarka baterii

Najnowsze instrukcje dla Ładowarka baterii