Instrukcja obsługi Victor 1460-4
Victor
kalkulator
1460-4
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Victor 1460-4 (7 stron) w kategorii kalkulator. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/7
Preface
Congratulations on your choice of a Victor electronic calculator. Careful design, quality materials, painstaking
workmanship, and advanced research and production facilities have given you a calculator that, with proper care,
will provide many years of trouble-free service. To assure future protection, offered by Victor’s Extended
Guarantee Protection Program.
This operating manual describes the features and operation of the Victor 1460-4 electronic calculator. This
calculator features the four basic arithmetic operations, two independent tax keys, percentage and percentage-of-
change, change sign, sigma, item count, non-add/date functions, backspace, and cost, sell, margin keys.
Table of Contents
General Maintenance
Replacing the Ribbon
Paper Feed
Keyboard Diagrams
Key Features
Application Examples
Warranty
Extended Warranty
Preparation
BEFORE USING THE PRINTER FOR THE FIRST TIME:
Remove the tape holding the ink ribbon in place.
Before Beginning Calculation
1. Plug in AC power
2. Be sure that the paper roll and ribbon have bee installed properly.
3. Turn power switch on, and make sure that the display lights. A “C” will automatically be printed on
the paper tape.
4. Set decimal point selector switch at the desired position.
NOTE: Please remove the piece of tape holding the printer ribbon in place for transportation.
General Maintenance
1. Do not place the calculator in hot, dusty, or damp locations.
2. To clean the housing, use a silicon-treated cloth. Do not use water or detergents.
3. Do not place anything on the housing, particularly on the head of the printer mechanism.
4. Turn off the power switch before removing the plug from AC wall outlet.
5. Turn the power switch off while not in use.
How to Feed the Paper Tape
1. Plug in the calculator and turn it on.
2. Cut or tear evenly the end of the paper roll to get a straight edge.
3. Place the paper holder into position. (Fig.
4. Install the paper roll on the paper holder.
5. Insert the paper end into the printer slot. (Fig.
6. Press the Paper Feed (↑) key to feed the paper to an adequate length.
Replacing the Ribbon
Your calculator is shipped with a 2-color ribbon already in place. You do not need to install or change it before you
begin using the calculator. When you have been using your calculator for some time, however, the print will
gradually become faint, indicating that you should change the ribbon. To change the ribbon, follow these steps.
1. Remove the paper roll, tearing the paper at the rear of the calculator. Use the Paper Advance (↑) key to
feed the remaining paper tape through the printer. Then remove the printer cover.
2. Remove the old ribbon by pulling it upward.
3. Install the ribbon spool with the black edge up. Roll from the outside of the full spool and place the
first spool on the spindle not engaged by the lever. Thread the new ribbon along the outside of the
guides and in front of the print wheels. Switch the lever to the other side and replace the second spool.
4. Rotate the spools to take up any slack. Replace the printer cover and the paper tape.
(Replace with the Victor #7010 Ink Ribbon)
Keyboard Layout
This section describes the mode switches, data entry keys, and operating keys provided on your calculator. The
following terms are used in discussing your calculator’s operation:
¾ The accumulator is the area of the calculator’s logic that stores a running total of the results of addition
and subtraction operations. It is the “adding machine” portion of the calculator.
¾ The calculating register is the area of the calculator’s logic where the intermediate and final results of
multiplication, division, and percentage calculations are stored. The contents of the calculating register do
not affect the accumulator.
¾ The keyboard register is the area of the calculator’s logic that stores the value that will immediately be
used in the next calculation.
¾ The item count register is the area of the calculator’s logic that counts your entries into the accumulator.
Each positive or negative entry is counted as one item.
¾ The memory register is the area of the calculator’s logic that accumulates amounts you add or subtract
from the memory. Because the memory register is independent of the accumulator and the calculating
register, it retains its value until you clear it with the Memory Total (MT) key.
Specyfikacje produktu
| Marka: | Victor |
| Kategoria: | kalkulator |
| Model: | 1460-4 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Victor 1460-4, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje kalkulator Victor
15 Września 2024
15 Września 2024
15 Września 2024
14 Września 2024
13 Września 2024
12 Września 2024
12 Września 2024
11 Września 2024
10 Września 2024
10 Września 2024
Instrukcje kalkulator
- kalkulator Sharp
- kalkulator Braun
- kalkulator Canon
- kalkulator Casio
- kalkulator Citizen
- kalkulator Sigma
- kalkulator HP
- kalkulator Olivetti
- kalkulator BaseTech
- kalkulator Omron
- kalkulator Texas Instruments
- kalkulator Victor Technology
- kalkulator Texas
- kalkulator Aurora
- kalkulator Genie
- kalkulator Rexel
- kalkulator Sanyo
- kalkulator Olympia
- kalkulator Rex
- kalkulator Genius
- kalkulator Trevi
- kalkulator Lexibook
- kalkulator Sencor
- kalkulator XD Enjoy
- kalkulator Tiger
- kalkulator Q-CONNECT
- kalkulator United Office
- kalkulator GlobalTronics
- kalkulator Milan
- kalkulator Calculated Industries
- kalkulator Global Tronics
- kalkulator Ibico
Najnowsze instrukcje dla kalkulator
12 Stycznia 2025
27 Grudnia 2024
21 Grudnia 2024
14 Grudnia 2024
24 Października 2024
15 Października 2024
9 Października 2024
6 Października 2024
5 Października 2024
5 Października 2024