Instrukcja obsługi Vertex Standard VX-4500
Vertex Standard
Łączność radiowa
VX-4500
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Vertex Standard VX-4500 (32 stron) w kategorii Łączność radiowa. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/32
VX-4500
VX-4600
Operating anual M
VX-4600VX-4500
Six Programmable Function Keys
5-tone Encode/Decode
ARTS (Auto Range Transpond System)
Dimmer/Lamp
Horn Alert
Public Address
Lock
Beep OFF
Encryption
Scan
Group Scan
Dual Watch
FM-Scan (Follow-Me Scan )
TA Scan
VOX
p F FrOgraMMable unctiOns/eatures (: VX-4600 only)
2-tone Encode/Decode
MDC-1200® Encode/Decode
REC & PLAY (Requires DVS-8)
Clear Voice
AF Min Volume
Talk Around
Emergency
Lone Worker
Direct Channel Entry
Code Up/Down
Code Set
Speed Dial
DTMF Code Set
ID Check
TX Save Disable
Unsafe Radiation Distance
Congratulations!
You now have at your ngertips a valuable communications tool: a Vertex Stan-
dard two-way radio! Rugged, reliable and easy to use, your Vertex Standard radio
will keep you in constant touch with your colleagues for years to come, with negli-
gible maintenance downtime.
Please take a few minutes to read this manual carefully. The information presented
here will allow you to derive maximum performance from your radio.
We’re glad you joined the Vertex Standard team. Call on us anytime, because com-
munications is our business. Let us help you get your message across.
N !otice
There are no owner-serviceable parts inside the transceiver. All service jobs
must be referred to an authorized Vertex Standard Service Representative.
Consult your Authorized Vertex Standard dealer for installation of optional
accessories.
S /W iafety arNiNg NformatioN
WARNING - DO NOT operate the VX-4500/-4600 radio when any
person(s) (bystanders) outside the vehicle are within the distances shown in
the chart at the bottom of this section.
Safety Training information:
Antennas used for this transmitter must not exceed an antenna gain of 3
dBi. The radio must be used in vehicle-mount congurations with a maxi-
mum operating duty cycle not exceeding 50 %, in typical Push-to-Talk con-
gurations.
This radio is restricted to occupational use, work related operations only
where the radio operator must have the knowledge to control the exposure
limits of passengers and bystanders by maintaining the minimum separa-
tion distance shown below.
Failure to observe these restrictions will result in exceeding the FCC RF
exposure limits.
Antenna Installation:
For rear deck trunk installation, the antenna must be located at least the fol-
lowing distance away from rear-seat passengers in order to comply with the
FCC RF exposure requirements.
For roof top installations, the antenna must be placed in the center of the
roof.
VHF Model UHF Model
1.85 Feet (0.56 m)2.36 Feet (0.72 m)
VX-4500/-4600 S OerieS perating anual M 1
IntroductIon
The VX-4500/-4600 Series are full-featured FM transceivers designed for exible
mobile and base station business communications in the VHF or UHF Land Mobile
bands. These transceivers are designed for reliable business communications in a
wide variety of applications with a wide range of operating capability provided by
their leading-edge design.
The VX-4500 allows up to 8 memory channels. The VX-4600 allows up to 512
memory channels which can each be programmed with an 8-character Alpha-
Numeric Tag.
Important channel frequency data is stored in EEPROM and ash memory on the
CPU, and is easily programmable by Vertex Standard dealers using a personal
computer and the Vertex Standard Programming Cable and
CE115 Software.
The pages which follow will detail the many advanced features provided in the
VX-4500/-4600 Series transceiver. After reading this manual, you may wish
to consult with your Network Administrator regarding precise details of the
conguration of this equipment for use in your application.
For North American Users Regarding 406 MHz Guard Band
The U.S. Coast Guard and National Oceanographic and Atmospheric
Administration have requested the cooperation of the U.S. Federal
Communications Commission in preserving the integrity of the protected
frequency range 406.0 to 406.1 MHz, which is reserved for use by
distress beacons. Do not attempt to program this apparatus, under any
circumstances, for operation in the frequency range 406.0 - 406.1 MHz if
the apparatus is to be used in or near North America.
VX-4500
VX-4600
Specyfikacje produktu
| Marka: | Vertex Standard |
| Kategoria: | Łączność radiowa |
| Model: | VX-4500 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Vertex Standard VX-4500, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Łączność radiowa Vertex Standard
4 Lipca 2024
4 Lipca 2024
3 Lipca 2024
3 Lipca 2024
2 Lipca 2024
2 Lipca 2024
1 Lipca 2024
30 Czerwca 2024
Instrukcje Łączność radiowa
- Łączność radiowa Motorola
- Łączność radiowa Stabo
- Łączność radiowa Spektrum
- Łączność radiowa President
- Łączność radiowa Kenwood
- Łączność radiowa ICOM
- Łączność radiowa Albrecht
- Łączność radiowa Simrad
- Łączność radiowa BaoFeng
- Łączność radiowa Team
- Łączność radiowa Furuno
- Łączność radiowa Rexon
- Łączność radiowa Multi Care Systems
- Łączność radiowa Wouxun
- Łączność radiowa Swissphone
- Łączność radiowa Wintec
- Łączność radiowa Intek
Najnowsze instrukcje dla Łączność radiowa
27 Września 2024
27 Września 2024
27 Września 2024
26 Września 2024
26 Września 2024
26 Września 2024
24 Września 2024
23 Września 2024
23 Września 2024
23 Września 2024