Instrukcja obsługi Ventus W160


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ventus W160 (6 stron) w kategorii Stacja pogodowa. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/6
Ventus Wireless Weather Station Model W160
Owners Manual
Thank you for purchasing the new generation color weather station. Designed and engineered with
the state-of-art technology and components, this instrument will provide accurate and reliable
measurement of barometric pressure, weather forecast, in/ out humidity, temperature, heat index,
dew point as well as moon phase and radio-controlled clock. Read this manual carefully to fully
explore the features and functions of the new product.
Name and Functions of Buttons:
Press Functions Hold 3 seconds
CLOCK Read time, calendar and day-of-week Set Clock & Calendar
ALARM Read alarm time; enable/disable alarm Alarm time setting
UP 1 step forward in setting Fast advance
Down 1 step backward in setting Fast backward
CHANNEL/ Select indoor, Channel 1,2,3, auto scroll Search for remote sensor
SEARCH
MEMORY Read max/min temperatures & humidity Clear memory record
HEAT INDEX/ Read Heat Index & Dew Point
DEW POINT
PRESSURE Toggle pressure unit hPa, inHg & mb Altitude setting
SNOOZE/LIGHT Trigger snooze alarm & extend backlight
ZONE Toggle RC time & Zone time Zone time setting
C/F Toggle degree C & F unit
Search for Radio-Controlled time
BATTERY & ADAPTER INSTALLATION
Home Receiver Unit:
Main Power Source: Plug in the 4.5V adapter into the adapter socket at the back for basic operation
and continuous backlight.
Backup Power: Lift off the battery cover, install 3 pieces of AAA backup batteries according to the
polarity indicated, close the battery cover.
Remote Sensor:
Loosen the screws on the battery door with a small screwdriver, insert 2 pieces of AAA batteries
according to the polarity indicated. Replace the cover and tighten the screws.
ALTITUDE SETTING
After battery installation, the main unit will enter altitude setting mode directly. Press “ ” or ” to ▲ ▼
select the unit in meter or feet. Press “PRESSURE” to confirm. Then press “ ” or to enter your ▲ ▼
current altitude. Press “PRESSURE” to confirm and exit the setting. This allows the unit to provide a
more accurate weather forecast reading. (For more information, see “WEATHER FORECAST &
BAROMETRIC PRESSURE” section)
SETTING UP THE WIRELESS THERMO-HYGROMETER:
For the first installation, always turn on the home unit and then the remote sensor. Set Channel 1
for the first remote sensor. Set channel 2 and channel 3 for the 2
nd
and 3
rd
sensor.
Press and hold CHANNEL/SEARCH button on main unit until a beep is sound to search for
remote sensor.
Press the Tx button on the back of remote sensor to transmit RF signal.
When RF connection is established, the respective temperature & humidity of the selected
channel will appear on the main unit.
RADIO-CONTROLLED CLOCK
The unit will start synchronizing the clock after battery/adapter installation or reset. In normal mode,
press “ “ in the battery compartment to enforce searching of radio-controlled clock signal. The
antenna icon will appear during synchronization, if the icon disappear afterwards, radio time signal is
not available at the moment. Try other locations later. Place the unit away from source of
interference such as mobile phones, appliances, TV etc.
Antenna icon with full signal strength will appear on screen if the reception of radio-controlled
time is successful. The radio-controlled clock will have a daily synchronization at 02:03 and 03:03
everyday. Each reception cycle is minimum 2.5 minutes and maximum 10 minutes.
WEATHER FORECAST & BAROMETRIC PRESSURE
The unit predicts weather condition of the next 12 – 24 hours based on the change of atmospheric
pressure. The coverage area is around 30 – 50 km. The weather forecast is based on atmospheric
pressure change and is about 70-75% correct. As weather conditions cannot be 100% correctly
forecasted, we cannot be responsible for any loss caused by an incorrect forecast.
SUNNY PARTLY CLOUDY CLOUDY RAINY STORMY
To obtain an accurate weather forecast & barometric pressure reading, you need to input your current
altitude. After the reset of the unit, it will enter the altitude setting mode. Press ” or “ ” to set the ▲ ▼
unit first, and then press “PRESSURE” and enter your current altitude. Press “PRESSURE” to confirm
and exit the setting. You can also hold “PRESSURE” button to enter altitude setting mode during
normal use.
Press PRESSURE button to select pressure unit between hPa, inHg & mb.
IN/OUT TEMPERATURE & HUMIDITY
Temperature reading is located on the lower left of the display and humidity is on the lower right.
Press “C/F“ button to select temperature unit C/ F.
Press CHANNEL/SEARCH button to select indoor, Ch1, Ch2, Ch3 and auto-channel scrolling
display modes.
IN/OUT HEAT INDEX
Heat Index combines the effects of heat and humidity. It is the apparent temperature of how hot the
heat-humidity combination makes it feels.
Press “Heat Index/Dew Point” button once to show the respective indoor or outdoor heat index on the
lower left display. “HEAT INDEX” icon will appear.


Specyfikacje produktu

Marka: Ventus
Kategoria: Stacja pogodowa
Model: W160

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Ventus W160, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Stacja pogodowa Ventus

Ventus

Ventus W210 Instrukcja

3 Października 2024
Ventus

Ventus W640 Instrukcja

3 Października 2024
Ventus

Ventus W154 Instrukcja

3 Października 2024
Ventus

Ventus W225 Instrukcja

3 Października 2024
Ventus

Ventus W232 Instrukcja

20 Września 2024
Ventus

Ventus W160 Instrukcja

18 Września 2024
Ventus

Ventus W233 Instrukcja

15 Września 2024
Ventus

Ventus V193-R Instrukcja

14 Września 2024
Ventus

Ventus W831 Instrukcja

11 Września 2024
Ventus

Ventus W224-7 Instrukcja

11 Września 2024

Instrukcje Stacja pogodowa

Najnowsze instrukcje dla Stacja pogodowa

Hyundai

Hyundai WSP 3080 Instrukcja

15 Października 2024
Livoo

Livoo SL262 Instrukcja

9 Października 2024
Muse

Muse M-085 WS Instrukcja

8 Października 2024
TFA

TFA 30.5045.54 Instrukcja

8 Października 2024
Davis

Davis DAV-6520 Instrukcja

7 Października 2024
Brandson

Brandson 304633 Instrukcja

7 Października 2024
Brandson

Brandson 305385 Instrukcja

7 Października 2024
GlobalTronics

GlobalTronics WT-440 Instrukcja

6 Października 2024