Instrukcja obsługi Vello NSD-35


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Vello NSD-35 (16 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 14 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/16
35MM NEGATIVE A
SLIDE DIGITIZER
USER MANUAL
2
The Vello NSD-35 makes it easy to digitize 35mm negative film strips and mounted slides with a camera
and macro lens. This kit features an LED light source that provides bright and consistent light, allowing you
to accurately capture the film and slides. Included are lens adapters and extension tubes that make it easy
to use a variety of macro lenses and adjust for the correct focus distance. Process the images with your
favorite photo editing software or with cameras that have a negative digitization mode.
THANK YOU FOR CHOOSING VELLO
3
Please read and follow all the instructions in this manual.
Do not disassemble or perform any unauthorized
modifications. Use only with the compatible devices
specified in this manual.
Keep this device away from water and extreme humidity,
and store it in a cool and dry place.
Do not operate in conditions with extreme heat or cold.
Do not operate in the presence of flammable gases or
vapors.
Keep out of reach of children. This device contains small
parts which may pose a choking hazard.
All images are for illustrative purposes only.
PRECAUTIONS
5
12. Film strip holder
13. Mounted slide holder
14. USB Type-A to Micro-B
power control cable
15. Extension tube 2 (×2)
16. Lens adapter 3
17. Lens adapter 4
18. Lens adapter 5
19. Lens adapter 6
20. Lens adapter 7
21. Lens adapter 8
12
13
14
15
16
18 19 20 21
17
6
ASSEMBLING THE DIGITIZER
To assemble the digitizer, you’ll need to select the
right adapters, so the film or slide is positioned
at your lens’s minimum focus distance. Table 2
(page 12) shows a variety of popular macro lenses
and their respective adapter combinations. If
your lens is not listed in the table, replicate its
minimum focus distance by adding the values of
the carrier extension (1), extension tube (2), and
lens adapter (3–8).
Example:
1 Carrier extension (1)
2 extension tube(s) (2)
3 lens adapter (3-8)
= lens minimum focus distance.
1 2 3
8
4. Attach the digitizer to your lens using the
appropriate lens adapter (see table 1). Insert
the holder into the carrier’s holder clips. Look
through the cameras viewfinder or at its LCD
screen to make sure you have the proper
alignment. To fine-tune your frame, loosen the
locking knob and rotate the carrier to adjust tilt.
5. Focus the image, starting with your lens set to
manual focus, and to its minimum focus distance.
You may need to consult your lens’s manual. To
fine-tune the focus distance, loosen the locking
knob and slide the carrier in and out. The focal
plane needs to meet the lenss minimum focus
distance for you to get a sharp image.
Note: It is recommended that you disable image
stabilization.
10
STAND-ALONE USE
LED Light
Use the LED light as a stand-alone image viewer
with the built-in stand or the 1/4-20 mount.
Carrier
Attach the diuser to the carrier, and use a
separate light source for digitizing the film or slides.
12
Table 2. Compatible lenses
Note: if your lens is not listed here, see Assembling the Digitizer (page 6) for instructions on how to configure the
adapter(s).
Brand ConfigurationCompatible Lenses
Canon
EF-S 60mm f/2.8 USM 1 - 2 - 2 - Lens
EF 100mm f/2.8L Macro IS USM 1 - 2 - 2 - 4 - Lens
EF 100mm f/2.8 Macro USM 1 - 2 - 2 - 8 - Lens
RF 100mm f/2.8L Macro IS USM 1 - 2 - 4 - Lens
Nikon
AF-S DX Micro NIKKOR 40mm f/2.8 G 1 - Lens
NIKKOR Z MC 50mm f/2.8 Macro 1 - 3 - Lens
AF Micro-NIKKOR 60mm f/2.8D 1 - 3 - Lens
NIKKOR Z MC 105mm f/2.8 VR S Macro 1 - 2 - 3 - Lens
AF-S VR Micro-NIKKOR 105mm f/2.8G IF-ED 1 - 2 - 2 - 3 - Lens
13
Brand ConfigurationCompatible Lenses
Sony FE 50mm f/2.8 Macro 1 - 5 - Lens
FE 90mm f/2.8 Macro G OSS 1 - 2 - 2 - 3 - Lens
Laowa
50mm f/2.8 2X Ultra Macro APO 1 - 2 - 7 - Lens
60mm f/2.8 2X Ultra-Macro 1 - 3 - Lens
65mm f/2.8 2X Ultra Macro APO 1 - 2 - Lens
85mm f/5.6 2X Ultra Macro APO 1 - 6 - Lens
100mm f/2.8 2X Ultra Macro APO 1 - 4 - Lens
Olympus M.Zuiko Digital ED 60mm f/2.8 Macro 1 - 2 - 6 - Lens


Specyfikacje produktu

Marka: Vello
Kategoria: Niesklasyfikowane
Model: NSD-35

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Vello NSD-35, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Vello

Vello

Vello PGS-P Instrukcja

25 Grudnia 2024
Vello

Vello NSD-35 Instrukcja

11 Grudnia 2024
Vello

Vello RC-N2P Instrukcja

11 Grudnia 2024
Vello

Vello LENS-2020 Instrukcja

11 Grudnia 2024
Vello

Vello RC-C1P Instrukcja

11 Grudnia 2024
Vello

Vello RC-C2P Instrukcja

11 Grudnia 2024
Vello

Vello RC-S2P Instrukcja

10 Grudnia 2024
Vello

Vello QuickDraw CB-100 Instrukcja

9 Października 2024
Vello

Vello CB-900 Instrukcja

9 Października 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

SmallRig

SmallRig VB99 SE Instrukcja

29 Stycznia 2025
QSC

QSC TSC-8 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5130 Instrukcja

29 Stycznia 2025
Sunding

Sunding SD-581G Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5070 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS2010 Instrukcja

29 Stycznia 2025
OSEE

OSEE TX402 Instrukcja

29 Stycznia 2025