Instrukcja obsługi Veho vfs 004
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Veho vfs 004 (27 stron) w kategorii skaner. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/27
-0-
-1-
Table of Contents
1. Precautions…………………………………………. 2
2. Preparation………………………………………….. 5
z Standard Accessories……………………….. 5
z Parts Names………………………………….. 6
3. Install The Driver and Software…………………… 7
z Install the Driver……………………………… 7
z Install the Software………………………….. 8
4. Place Film/Slide into the Holder………………….. 9
5. Connecting the Digital Image Copier..…………… 10
6. Edit The Pictures/ Photo Editing Tools.................. 15
z Adjust…………….……………………………. 15
z Retouch…………..…..………………………. 19
z Clipboard……………………………………… 21
9. Appendix…………………………………………….. 22
z Specifications…………………………………. 22
z System Requirements……………………….. 22
10. Trouble Shooting……………………………………. 23
EN
-2-
Welcome
Thank you for purchasing a Digital Image Copier.
Please take a moment to read through this manual. Its
contents will send you on an educational journey into your
recorder multiple capabilities.
1. Precaution
Before using Digital Image Copier, please ensure that you
read and understand the safety precautions described
below. Always ensure that the image copier is operated
correctly.
• Never operate Digital Image Copier inside of an
aircraft or anywhere else where operation of such
devices is restricted. Improper use creates the risk
of serious accident.
• Do not try to open the case of Digital Image Copier
or attempt to modify Digital Image Copier in any way.
High-voltage internal components create the risk of
electric shock when exposed. Maintenance and
repairs should be performed only by authorized
service providers.
• Keep Digital Image Copier away from water and
other liquids. Do not use Digital Image Copier with
wet hands. Never use Digital Image Copier in the
rain or snow. Moisture creates the danger of fire and
electric shock.
• Keep Digital Image Copier and its accessories out of
the reach of children and animals to prevent
accidents or damage to the image copier.
-3-
• If you notice smoke or a strange odor coming from
Digital Image Copier, turn the power off immediately.
Take Digital Image Copier to the nearest authorized
service center for repair. Never attempt to repair
Digital Image Copier on your own.
• Use only the recommended power accessories. Use
of power sources not expressly recommended for
Digital Image Copier may lead to overheating,
distortion of the equipment, fire, electrical shock or
other hazards.
• Digital Image Copier may become slightly warm
during use. This does not indicate malfunction.
• If the exterior of Digital Image Copier needs cleaning,
wipe it with a soft, dry cloth.
EN
-4-
FCC Notice
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses
and can radiate radio frequency energy. If not installed
and used in accordance with the instruction, it may cause
harmful interference to radio communication. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception, which
can be determined by turning the equipment on the off,
the user is encouraged to try to correct the interference by
one or more the following suggestion.
z Reorient or relocate the receiving antenna.
z Increase the distance between the equipment and
the receiver.
z Connect the equipment to a different power outlet
other than the one where the receiver is connected.
z Consult an experienced television or radio
technician for help.
CAUTION
To comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules, this device must
only be installed on computer equipment certified to
comply with the Class B limits.
-5-
Preparation
Standard Accessories
Image Copier Manual CD
Positive Slide Holder Negative Film Holder
Clean brush
EN
-6-
Part Names
Note: We strongly suggest using a clean, dry, non-alcohol cotton
swab to insert into the image copier slot and clean the glass
surface periodically to produce a clear image. Please make sure
your film negatives/ mounted slides and cover trays are clean
before inserting into the copier as well. Dust or dirt from the
negatives and cover trays will affect the quality of your scanned
images.
-7-
3. Install the Driver and Software
To use the digital image copier you must install the Digital
Image Copier Driver and ArcSoft PhotoImpression 6 in
advance.
Installing the Driver
1. Turn on the computer.
2. Insert the installation CD into the CD-ROM drive and
the installation CD menu will appear.
3. When you see the following screen, Choose
“Scanner Driver”.
4. Follow the on-screen instructions to install driver.
Under XP OS
- Click “Next”
- Click “Install”
- Click “Finish”
EN
-8-
Under Vista OS
- Click “Next”
- Click “Install”
- Click “Finish”
- Select “Locate and install driver software
(recommended)”
Installing the Software
1. Insert the installation CD into the CD-ROM drive and
the installation CD menu should appear.
2. When you see the
following screen,
choose “ArcSoft
Software Suite” to
install the software.
3. Follow the on-screen
instructions.
4. Setup MicroSoft
DirectX 9.0
5. The installed software
will automatically create a PhotoImpression 6 logo
on your desktop.
6. Restart the computer.
-9-
4. Place Film/ Slide Into The Holder
1. Open the negative/ positive slide holder as Illustrated.
2. Put a negative film/ positive slide into holder as
shown.
3. Close the holder and please make sure the holder
close properly.
EN
-10-
5. Connecting the Image Copier
For first time users, do NOT plug the image copier
into computer while the holder is inserted in the
image copier. Please remove the film/slide holder
before connecting to the computer, and click
“calibrate” button to perform calibration the first time
the image copier is used.
1. Plug the USB cable of image copier to computer
properly. Once connected the power LED light will be
blue.
2. Insert the loaded film/ slide holder properly into the
slot as shown.
(Insert through front entrance)
3. Click on the PhotoImpression 6 icon on the desktop
and you will see the following.
-11-
4. Click “Get Photo” and choose “Acquire from
Scanner”.
5. Verify selected device is “OVT Scanner” and select
the location to save your pictures. Click “Acquire”.
Please note that if you want to scan black-white film,
please choose “B&W Negative” film type.
EN
-12-
There are two formats JPG or TIF for setting
There are four quality levels (Highest/ High/ Normal/
Low) for selection in JPG format.
6. You can adjust the location of the film by moving the
film holder; the film holder can be moved in both
directions.
(Insert through rear entrance)
-13-
7. Click “Snapshot” on the screen or press the COPY
button on the image copier. A green frame will
indicate the selected pictures in the preview area; the
maximum is 12 pictures in the preview area. If there
are more than 12 pictures scanned, the 13th pictures
will overwrite the 1st picture. If you want to save one
or more pictures, press the Shift key to continue
selecting pictures or the CTRL key to select a single
picture.
If you would like to adjust color and brightness,
please press “Color/Brightness Adjustment” button
by pressing plus and minus button before click snap
shot” or press the copy button.
EN
-14-
8. Press the “Transfer” button to transfer or save
selected pictures to your computer.
9. Press “Exit” to exit.
Note1:
To ensure the best image quality, please allow about 5 seconds
between snapshots and transfers for white balance
enhancement.
Note2: Please do not minimize the window of scanning screen
after transferring the pictures. If you want to see the scanned
pictures, click EXIT and you will see the picture you scanned
before.
Note3: Please “REMOVE” any version of your PhotoImpression
6 before install our this new one.
Note4: Have manual “Calibrate” while the first time you use your
Digital Image Copier.
-15-
6. Edit The Pictures
First, click on the picture to select, and then use the
ArcSoft tools to edit the pictures as you like.
Edit
Photo Editing Tools
The Photo Editing Tools module includes a complete set
of photo enhancement, editing and retouching controls.
The windows can be stretched to provide a large size
view of the active photo. Double click the module’s tool
bar to maximize the window to fill the computer screen.
In addition to the large photo workspace, the Photo
Editing Tools module includes five distinct sets of controls:
1. Adjust
1.1 Enhance
The Enhance feature includes two types of controls:
- Auto Enhance
Click the “Auto Enhance” button to improve the overall
quality of your pictures with a single click.
- Manual Fix
For precise image enhancement control, adjust the
brightness, contrast and sharpen sliders.
How to enhance a photo manually:
1. Move the sliders to adjust the level of brightness,
contrast, saturation, hue and sharpen for adjustment.
2. Use the zoom slider to get a closer look at how the
adjustment affects the photo.
3. Click “Apply” if you like the result. Click “Cancel” if you
do not.
EN
Specyfikacje produktu
| Marka: | Veho |
| Kategoria: | skaner |
| Model: | vfs 004 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Veho vfs 004, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje skaner Veho
16 Września 2024
5 Września 2024
3 Września 2024
28 Sierpnia 2024
8 Sierpnia 2024
Instrukcje skaner
- skaner Braun
- skaner Voltcraft
- skaner SilverCrest
- skaner Epson
- skaner Fujitsu
- skaner Panasonic
- skaner Canon
- skaner Nedis
- skaner Medion
- skaner Lenco
- skaner HP
- skaner Brother
- skaner Honeywell
- skaner Nikon
- skaner Kodak
- skaner Xerox
- skaner Zebra
- skaner Cobra
- skaner Trust
- skaner AgfaPhoto
- skaner Eurolite
- skaner Ricoh
- skaner Renkforce
- skaner Rollei
- skaner Uniden
- skaner Dymo
- skaner Panduit
- skaner Visioneer
- skaner ION
- skaner Maginon
- skaner Antec
- skaner Konica Minolta
- skaner Jay-Tech
- skaner Albrecht
- skaner AVerMedia
- skaner Genius
- skaner Technaxx
- skaner Martin
- skaner Blackmagic Design
- skaner Newland
- skaner Elmo
- skaner Avision
- skaner Lexmark
- skaner Agfa
- skaner Reflecta
- skaner Tevion
- skaner Targus
- skaner Sagem
- skaner Easypix
- skaner Kensington
- skaner GlobalTronics
- skaner Steren
- skaner Konig
- skaner Minolta
- skaner Dnt
- skaner Hella
- skaner Ipevo
- skaner Rittz
- skaner Jobo
- skaner Plustek
- skaner Zolid
- skaner Traveler
- skaner Mustek
- skaner Neat
- skaner RadioShack
- skaner ICarsoft
- skaner Kenko
- skaner Kogan
- skaner Yupiteru
- skaner Vupoint Solutions
- skaner DTRONIC
- skaner Ross-Tech
- skaner DENSO
- skaner Perfect Choice
- skaner IRIS
- skaner Soundsation
- skaner CDVI
- skaner Scan Dimension
- skaner Dyka
- skaner Matter And Form
- skaner Pacific Image
- skaner Doxie
- skaner CZUR
- skaner Cartrend
- skaner 3DMAKERPRO
- skaner Ambir
- skaner Microtek
Najnowsze instrukcje dla skaner
19 Lutego 2025
12 Stycznia 2025
11 Stycznia 2025
11 Stycznia 2025
29 Grudnia 2024
22 Grudnia 2024
14 Grudnia 2024
14 Grudnia 2024
12 Grudnia 2024
12 Grudnia 2024