Instrukcja obsługi Valk VL-HL3

Valk Akcesoria rowerowe VL-HL3

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Valk VL-HL3 (3 stron) w kategorii Akcesoria rowerowe. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/3
Colours and sizes may vary
User Manual
[Revision 1.0 August 2021]
READ THIS MANUAL CAREFULLY BEFORE USE –
FAILURE TO DO SO MAY RESULT IN INJURY,
PROPERTY DAMAGE AND MAY VOID WARRANTY. •
KEEP THIS MANUAL FOR FUTURE REFERENCE. •
Products covered by this manual may vary in
appearance, assembly, inclusions, specifications,
description, and packaging.
HELMET INSTRUCTIONS:
The helmet you have just purchased provides
protection, whether on or off the road. To ensure
proper use of this helmet, familiarise yourself with
its features, fit and care by carefully reading
through this manual before wearing your new
helmet.
WARNING:
1. No helmet can protect the wearer against all
possible impacts.
2. The helmet is designed to be retained by a strap
under the lower jaw.
3. To be effective, a helmet must fit and be worn
correctly. To check for correct fit, place helmet on
head and make any adjustments indicated.
Securely fasten retention system. Grasp the
helmet and try to rotate it to the front and rear. A
correctly fitted helmet should be comfortable and
should not move forward to obscure vision or
rearward to expose the forehead.
4. No attachments should be made to the helmet
except those recommended by the helmet
manufacturer.
5. The helmet is designed to absorb shock by partial
destruction of the shell and liner. This damage
may not be visible.Therefore, if subjected to a
severe blow, the helmet should be destroyed and
replaced even if it appears undamaged.
6. The helmet may be damaged and rendered
ineffective by petroleum and petroleum products,
cleaning agents, paints, adhesives and the like,
without the damage being visible to the user.
7. A helmet has a limited lifespan in use and should
be replaced when it shows obvious signs of wear.
8. This helmet should not be used by children while
climbing or doing other activities where there is a
risk of hanging or strangulation if the child gets
trapped whilst wearing the helmet.
THE PROPER FIT:
STEP 1:
The helmet fits correctly when the fit pads hold it
firmly but comfortably in place. Different
thicknesses are provided for that purpose. Pads are
held in place by hook and loop style fasteners. Try
any combination of the different thicknesses
provided until the helmet fits firmly and comfortably.
All fitting adjustments be made with the MUST
helmet in the proper position. Failure to do so will
result in a poor fit.
This will allow the helmet to move out of position or
come off in an accident. For proper position, please
refer to Diagram A.
STEP 2:
Always wear a helmet low in the front to protect the
forehead as in the "correct" figure.
STEP 3:
The front and rear straps should join at a point
slightly below and in front of the ears. See Diagram
B. To adjust the position of the straps hold one end
of the buckle in one hand and slide the slide
adjuster up or down as necessary with the other
hand correctly positioned.
To adjust the front or rear strap individually hold the
strap to be adjusted and slide the slide adjuster in
the appropriate direction.
Make sure the loose end of the strap passes
through the rubber “O” ring. If it does not, the strap
may slide loose and the helmet can come off
accidentally. See Diagram F.
STEP 4:
Always wear the helmet with the chin strap buckle
fastened and the strap pulled tight . Make sure the
strap is well back against the throat, NOT on the
point of the chin. Straps worn in the point of the
chin increase the chance of the helmet coming off
in an accident. See Diagrams C and D on how to
fasten and release the buckle.
STEP 5:
Before using the helmet, make sure it fits correctly,
the straps are correctly adjusted and the chin strap
is tight enough. Put the helmet on in the correct
position. Fasten the chin strap and pull it tight.
CHECK THE FIT:
Grab the helmet with both hands and twist it to the
left and to the right. If the helmet fits right, the skin
on the forehead will move as the helmet moves. If it
does not,the helmet is too loose. Return to Step 1.
CHECK THE STRAPS:
Grab the helmet with both hands and try to move it
by rolling the helmet forward and backward as far
as you can. If you can roll it off the head completely
in either direction, roll it forward so far that it blocks
vision or backwards far enough to expose the
forehead it doesn't fit right. Repeat Steps 3 and 4
until helmet movement is minimal.
WARNING:
If you cannot adjust your helmet to fit as required by
Step 5, . Replace it DO NOT USE THIS HELMET
with a different size.
STEP 6:
Once you are satisfied that the helmet fits correctly
and that all straps are properly adjusted and
tightened, take a short ride. Pay attention to overall
comfort and helmet stability while riding. Make any
minor adjustments to the fit pads and straps to
improve the comfort stability.
CLEANING YOUR HELMET:
Use only mild soap and water to clean the helmet,
straps and pads. use chemicals. Do not DO NOT
use solvents, paints and hydrocarbons.
STORING YOUR HELMET:
After each use, allow the helmet to air dry and then
store in a cool, dry place. Excessive heat can
damage the helmet. In direct sunlight, the back
ledge of car, behind rear window and other places
that can get hot enough, will cause heat damage.
Damaged helmets will appear to have uneven or
bubbly surfaces.
DO NOT USE HEAT-DAMAGED HELMETS.
Some perts beli that the incorr t or prol ed u of almost any pr ct mex eve ec ong se odu ay
ca seu seri s njury or death To help reou i . duce y r ri of seri s njury or d th, refer ou sk ou i ea
to the nformati below. For more informati , i on on see www.dat tr mser r.com/ fetyas ea ve sa
Consult a cumentation, ll do packagi and product ng
l before use Note ha some products feature abe nglli . t t
documentation ava le on . It is recommend to ilab line ed
print and retain the docum tatien on.
Before each use, check t product for loose/broken/he
damaged/miss g parts, win ear or aks (if app cable). le li
Never use a pro c with du t
l se/broken/damaged/missing parts woo , ear or leaks.
Pro cts mus inspected adu t be nd serviced (if
app c le) by a qua fied technicili ab li an every 6 months.
This is s avera resid tial use by persba ed on ge en ons of
avera size a strength, and on a property of ge nd
avera metropo tge li an size. Use be ndyo these
recommendati s may re ire more r uent on qu f eq
inspections/servic g.in
Ensure tha a users of the produc have complet a t ll t ed
suit le industry recognis traini course fore ab ed ng be
being a owll ed access to the product.
If this produc has rchas in error wt been pu ed hen
consi ring the information presde ented he re, contact
t reta er directly for ta s o their returns he il de il f policy if ,
required.
The product has been supp by a general lied
merchandise reta er t may t be fam ar with y r il hat no ili ou
specific cati or descriptiappli on on of app cati . Be li on
sure to attain third-party approval from a qua fiedli
specia st for y r app catili ou li on before use regardless of ,
any assur ces from he reta er or its representatives.an t il
This produc is t intend for use wt no ed here fail-safe
operation qu is re ired As with y product (for . an
example, automobile, computer toaster) here is t, , t he
possib ty of tec ical issues thaili hn t may require the
repair or replacement of parts or the produc itself. If , t
t possib ty of such fa ure and t associated time it he ili il he
may take o rectify could in any way inconveni ce the t en
user, busi ss or employne ee, or fi ncia y affect t na ll he
user busi, ness or employ ,ee then the produc is t t no
suit le for y r requirements. This product is not ab ou
intended for use where incorrect operati or a fa ure on il
o y ki includi f an nd, ng bu not t limit to, a c diti ed on on
requiring product return r lacement, rts , ep pa
replacemen or service by a tec icit hn an may c se au
fi cial loss loss of employnan , ee time or an
inconvenience requiring comp sati .en on
©2021 Valk. All rights reserved. No part of this document, including descriptive content, concepts, ideas, diagrams or images may be
reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, scanning or recording, or any
information storage and retrieval system, without express permission or consent from the publisher.

Specyfikacje produktu

Marka: Valk
Kategoria: Akcesoria rowerowe
Model: VL-HL3

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Valk VL-HL3, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Akcesoria rowerowe Valk

Valk

Valk VL-HS Instrukcja

26 Września 2024
Valk

Valk VL-HM Instrukcja

26 Września 2024
Valk

Valk VL-HL3 Instrukcja

26 Września 2024
Valk

Valk VL-HL4 Instrukcja

26 Września 2024
Valk

Valk VL-HL Instrukcja

26 Września 2024

Instrukcje Akcesoria rowerowe

Najnowsze instrukcje dla Akcesoria rowerowe

Crivit

Crivit IAN 270384 Instrukcja

10 Października 2024
Knog

Knog Oi Luxe Instrukcja

9 Października 2024
Abus

Abus WBA65 Instrukcja

8 Października 2024
Shimano

Shimano FD-M985 Instrukcja

8 Października 2024
Topeak

Topeak PRESSURE-RITE SHOCK ADAPTER Instrukcja

7 Października 2024
Blackburn

Blackburn Honest Digital Shock Instrukcja

6 Października 2024
Funn

Funn Ripper Instrukcja

5 Października 2024
Funn

Funn Mamba Instrukcja

4 Października 2024
Shimano

Shimano FD-M8000-L Instrukcja

4 Października 2024
Basil

Basil Bremen Instrukcja

2 Października 2024