Instrukcja obsługi V7 UPS2URM1500DC-NC-1N

V7 UPS UPS2URM1500DC-NC-1N

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla V7 UPS2URM1500DC-NC-1N (117 stron) w kategorii UPS. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/117
UPS2URM1500DC-NC-1N
User Guide
1
at least two hours for the UPS system to acclimate to the environment.
Do not locate the UPS system near water or in high humidity vironments. en
Do not locate the UPS system where it will be exposed to direct sunlight or near heat
sources.
Do not block ventilation slots in the UPS housing. Avoid ove
ventilation.
1-3. Installation
Do not connect electronic devices which could overload the UP
printers, scanners) to the UPS output sockets.
Arrange cables to avoid stepping on or tripping over them.
Do not connect personal appliances such as hair dryers to UPS
Connect the UPS system only to a an easily accessed and grou
outlet) proximity of where the UPS system is to be installedin
Use only VDE-tested, CE-marked (or UL-marked for 100/110/1
mains cable (e.g. the mains power cable of your computer) to
system to a grounded, shockproof outlet.
Use only VDE-tested, CE-marked (or UL-marked for 100/110/1
power cables to connect the loads to the UPS system.
When installing equipment ensure that the sum of the leakage ,
and the connected devices does not exceed 3.5mA.
Temperature Rating: Units are considered acceptable for use in
of 40°C (104°F).
1-4. Operation
Do not disconnect the UPS system mains cable or from the bs
(shockproof socket outlet) during operation as this w eliminill
grounding of the UPS system and of all connected loads.
The UPS system features its own, internal current source (batte
sockets, or output terminals block may be electrically live eve
not connected to the building wiring outlet.
In order to fully disconnect the UPS system, first press the OFF
disconnect the mains.
Prevent liquids or allowing foreign objects to contact the UPS’
2
Caution - Risk of Electric Shock. The battery circuit is not isolated from the input
voltage. Hazardous voltages may occur between the battery terminals and the
ground. Before touching any components, verify that no voltage is present!
Caution - Do not incinerate batteries is can cause an explos. Th
Caution - Do not attempt to open or damage batteries. Release
harmful and potentially toxic to the skin and eyes.
Batteries can cause electric shock and have a high short-circuial
the precautionary measures and any other measures deemeses
working with batteries:
a) Remove watches, rings, or other metal objects from ha
b) Use tools with insulated (rubber) handles.
c) Wear rubber gloves and boots.
d) Do not lay tools or metal parts on top of batteries.
e) Always disconnect the charging source and load prior
maintaining the battery.
f) Remove battery grounds during installation and maint
likelihood of shock. Remove the connection from grou
battery is determined to be grounded.
When changing batteries, use the same number and type of bat
packs as specified
For UPS with internally mounted battery
a) Information to enable the replacement of the battery with
at www.v7world.com
b) Safety instructions to allow access by service personnel
installation/service handbook, available at www.v7worl
c) If batteries are to be installed by service personnel, instr
interconnections, including terminal torque is available
Replace fus with the same type and amperage. es
Only authorized service personnel should attempt dismantleto
WARNING: (for 220/230/240 VAC system) This is a category
residential environment, this product may cause radio interfere
user many be required to take additional measures.


Specyfikacje produktu

Marka: V7
Kategoria: UPS
Model: UPS2URM1500DC-NC-1N

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z V7 UPS2URM1500DC-NC-1N, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą