Instrukcja obsługi V-TAC VT-80024

V-TAC Ulga VT-80024

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla V-TAC VT-80024 (3 stron) w kategorii Ulga. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/3
In case of any query/issue with the product, please reach out to us at: support@v-tac.eu
For More products range, inquiry please contact our distributor or nearest dealers.
V-TAC EUROPE LTD. Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B
MULTI-LANGUAGE
MANUAL QR CODE
Please scan the QR code
to access the manual in
multiple languages.
INSTRUCTION MANUAL
LED BULKHEAD
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions
carefully before starting the installation and keep this manual handy for future reference. If you have any another
query, please contact our dealer or local vendor from whom you have purchased the product. They are trained
and ready to serve you at the best. The warranty is valid for 2 years from the date of purchase. The warranty
does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no
warranty against damage to any surface due to incorrect removal and installation of the product. The products
are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This
product is warranted for manufacturing defects only.
TECHNICAL DATA
MODEL VT-80024
SKU 23596, 23597, 23598
POWER 24W
LUMENS 2500 LM
INPUT VOLTAGE AC: 220-240V, 50/60Hz
BEAM ANGLE Sphere 360°
CRI ≥80
DF ≥0.7
LIFE SPAN 25,000 Hours
ON/OFF CYCLE 10,000 Times
OPERATING TEMPERATURE -20°C to +40°C
MATERIAL PP+PP
DIMENSION 240x240x38mm
*This product contains a light source of energy eciency class<F>, where <F> shall be replaced by the
energy class of the contained light source.
INSTALLATION INSTRUCTION
1
3 4
2
1. Drill holes on the wall, and plug the
expansion sleeve into the holes
3. Align with the hole position and fix
the lamp body with screws
4. installed, turn on the light electricity,
lamps and lanterns can normal use.
2. Connect the two input cables to L/N
Please make sure to turn o the power before starting the installation.
Installation must be performed by a qualified electrician.
If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively
replaced by the manufacturer or his service agent or a similar qualified person in order
to avoid a hazard.
Terminal block not included.
The light source contained in this luminaire shall only be replaced by the
manufacturer or his service agent or a similar qualified person.
WARNING
This marking indicates that this
product should not be disposed
of with other household wastes.
Caution, Risk of electric shock Replaceable (LED Only) light
source by a professional
Non-replaceable
control gear
DISASSEMBLY INSTRUCTION
(FOR MARKET SURVEILLANCE TEAM ONLY)
1.Disassemble the diuser
Note: Light source removal will void the warranty
2. Weld and remove the input cable
3.Light source
for SLR testing


Specyfikacje produktu

Marka: V-TAC
Kategoria: Ulga
Model: VT-80024

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z V-TAC VT-80024, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Ulga V-TAC

V-TAC

V-TAC VT-952 Instrukcja

5 Stycznia 2025
V-TAC

V-TAC VT-983 Instrukcja

5 Stycznia 2025
V-TAC

V-TAC VT-719 Instrukcja

5 Stycznia 2025
V-TAC

V-TAC VT-984 Instrukcja

5 Stycznia 2025
V-TAC

V-TAC VT-969 Instrukcja

4 Stycznia 2025
V-TAC

V-TAC VT-80024 Instrukcja

4 Stycznia 2025
V-TAC

V-TAC VT-75001 Instrukcja

3 Stycznia 2025
V-TAC

V-TAC VT-75002 Instrukcja

3 Stycznia 2025
V-TAC

V-TAC VT-25W Instrukcja

28 Grudnia 2024
V-TAC

V-TAC VT-1253S Instrukcja

8 Października 2024

Instrukcje Ulga

Najnowsze instrukcje dla Ulga