Instrukcja obsługi UPM WT440H Weerstation
UPM
Stacja pogodowa
WT440H Weerstation
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla UPM WT440H Weerstation (6 stron) w kategorii Stacja pogodowa. Ta instrukcja była pomocna dla 14 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/6
1
OUT
IN
TREND
TREND
MIN
MIN
MINIMUM
SETTING UP THE TRANSMITTER
GETTING STARTED
button placement
1
2
3
4
5
MINUTE/-/MIN: shows minimum
temperature; adjusts clock, alarm, date &
year and temperature alarm values
ALARM/( C/ F): toggles between , 12 and
24hourformat,Alarm1&2onandoff; disables
upper & lower temperature alarms
°°°° Cand F
CHN: scrolls through remote channels (1 to 4);
scrolls through local and remote channels (1 to 4)
in (upper & lower) temperature alarm mode
HOUR/+/MAX: shows maximum
temperature; adjusts clock, alarm, date &
year and temperature alarm values
MODE/SNOOZE: scrolls through Clock 1&2,
Alarm 1&2, Date & Year, and (Upper & Lower)
Temperature Alarm Mode; snooze for alarm
1
2
3
5
4
9
WD633 + WT440H
Wireless Weather Station
WD633
Receiver
Congratulations on your purchase of this
weather station set, WD633 + WT440H.
Please take the time to read and
understand this manual so you can begin
to enjoy the convenience and features this
product has to offer.
WT440H
Transmitter
OWNER’S
MANUAL
Main Display Unit WD633
* dual clock and dual alarm
* calendar (date/day/month/year)
* local temperature display
* receives and displays temperature and
humidity from up to 4 remote transmitters
via RF technology of 433MHz
* minimum/maximum temperature memory
* temperature and humidity trend indicator
* local/remote temperature alarms
* weather icons
* moon phase symbols
* user-selectable C or F
* battery type:2xAA
Remote Transmitter WT440H
* drip-proof design with LCD screen
* temperature display in user-selectable
Cor F
* humidity display
* transmission range: up to 40 metres in
open area
* table stand or wall mountable
* battery type:2xAA
°°
°°
MOON PHASE
MONDAY
CLOCK1
OUT
IN
TREND
TREND
MOONPHASE
MONDAY
CLOCK1
OUT
IN
TREND
TREND
MOONPHASE
MONDAY
CLOCK1
OUT
IN
TREND
TREND
:
FEATURES
Date Setting
February will have either 28 or 29 days depending on the year setting.
:
Scroll to the Date mode using .
Press to set the month.
Press to set the date.
NOTE: Weekday is automatically determined from the year/month/date setting.
MODE
HOUR/+/MAX
MINUTE/-/MIN
Year Setting
Scroll to the Year mode using
Press or key to adjust the year.
MODE
+-
:
.
CALENDAR SETTING
1
1
2
2
3
Remote (Outdoor) Temperature and Humidity
Local (Indoor) Temperature
Selecting C or F Temperature Display°°
TEMPERATURE & HUMIDITY DISPLAY
If the Learn Function is performed successfully (refer to the WIRELESS
TRANSMISSION section), the remote (outdoor) temperature and humidity will
display on the bottom of the LCD screen.
Press to toggle between
Channels 1, 2, 3 and 4.
CHN
The local (indoor) temperature will display instantly after
batteries are inserted into the receiver.
Toggle between C and F by pressing
in either Clock 1 or Clock 2 mode.
°°
C/ F
°°
*
*
A
B
B
A
NOTE: The temperature and humidity data will on the LCD screen.alternate
Min and Max Temperature
Temperature and Humidity Trend
TEMPERATURE & HUMIDITY DISPLAY
A
B
The trend indicator shows the trend of the temperature and humidity in
the past half-hour interval.
Example:
The following trend
indicates that the
temperature is rising.
Arrow Indicator
Rising Steady Falling
Trend
Press in Clock 1 mode to display
minimum temperature
The MIN symbol will appear.
MIN
.
To return to normal temperature and
humidity display, press again.MIN
To return to normal temperature and
humidity display, press again.MAX
Press in Clock 1 mode to display
maximum temperature.
The MAX symbol will appear.
MAX
NOTE: Min/Max readings are automatically cleared daily at 00:00
Based on the and data collected from the remote
transmitter (Channel 1), the receiver will display the following weather
icons on the LCD screen.
temperature humidity
WEATHER ICONS
About Freeze Warning:
NOTE:
!
!
!
The SNOW icon will blink to warn of 'freezing'.
Activated when Channel 1's temperature is between -1.9°C and 2.9°C.
The SNOW icon will appear solid if and when Channel 1's temperature
falls below -1.9°C.
!
!
!
When you first set up the weather station set, the weather icon shown on
the display will be CLOUDY.
The weather icon is based solely on the temperature and humidity data
collected from the remote transmitter Channel 1.
If Channel 1’s slot is empty, the weather icon shown on the display will
always be CLOUDY.
SUNNY CLOUDY RAIN SNOW
FREEZE
WARNING
OR OR
<flashing snow>
OUT
IN
TREND
TREND
MAX
MAX
MAXIMUM
*
*
Local Temperature
Date Setting
Year Setting
Remote Temperature Remote Humidity
1
1
B
A
2
2
3
IN
TREND
OUT
TREND
%
TREND
OUT
MONDAY
MONTH DAY
YEAR
PAGE 1
PAGE 10
PAGE 2
PAGE 11
PAGE 3
PAGE 12
6
7
8
9
C/F: changes House Code and Channel Code;
selects °C or °F
SET: activates SET function
Battery Compartment
LCD Screen
10
Battery Cover
11
Wall Mount Bracket & Table Stand
SET C/F
-
AA 1.5V
+
-
AA 1.5V
+
7
6
11
10
9
8
Remove battery cover
Set up the transmitter(s) setting up the receiverbefore
2 AA size batteries (included)
1
*
Temperature and humidity will appear and
on the LCD screenalternate
House code will blink for 8 seconds
2
3
4
5
6
7
8
9
10
Select House code (1-15) by pressing C/F
Press SET
Press SET
Channel code will blink for 8 seconds
Select Channel code (1-4) by pressing C/F
* If you have multiple transmitters for a single receiver,
set each transmitter to the House codesame
* If you have multiple transmitters for a single receiver,
set each transmitter to a Channel codedifferent
%
1
1
1
SET C/F
-
AA 1.5V
+
-
AA 1.5V
+
5
9
4
7
6
8
10
11
2
Insert batteries into compartment,
observing proper polarity
Select temperature display in C or F by pressing
°° C/F
Replace battery cover
11
12
3
1
12
1
1
MOONPHA SE
MONDAY
CLOCK1
OUT
IN
TREND
TREND
1
1
1
1
1
2
2
2
3
3
*
*
4
4
2
3
4
SETTING UP THE RECEIVER WIRELESS TRANSMISSION
WIRELESS TRANSMISSION
Automatic Learn Function:
Manual Learn Function (Remote Signal Search):
The learn function executes automatically and runs for approximately
3 minutes when batteries are first installed in the receiver.
Press and hold for 3 seconds to start.CHN
If a new remote transmitter is added or if signal is lost (outdoor
readout on the receiver is blinking), the learn function must be
executed again.
Within these 3 minutes, the receiver will pick up the temperature and
humidity signals from remote transmitter and display the reading.
Unit will beep to indicate that the learn function has started.
Channel symbol will blink and unit will continue to beep as each
remote transmitter is detected.
Within 3 minutes, the temperature and humidity reading of the remote
transmitter will display on the receiver.
TEMPERATURE ALARM TEMPERATURE ALARM
MOONPHASE
MONDAY
CLOCK1
OUT
IN
TREND
TREND
MOONPHA SE
MONDAY
CLOCK1
OUT
IN
TREND
TREND
2
Synchronized
Remove battery cover
batteries into compartment,
observing proper polarity; then
replace cover
Insert
1
2
3
2 AA size batteries (included)
3
3
1
1
4
4
2
2
*
*
3
3
2
1
WIRELESS TRANSMISSION
For optimal performance:
Place the receiver and remote transmitter side by side about 1 metre
apart, and allow the receiver and remote transmitter to synchronize
for 10 minutes before you place the remote transmitter outdoors.
Environmental factors and signals from other household devices, such
as remote entry controls, security systems, and computers, may
interfere with the wireless transmission of this product and cause
temporary reception loss. This is normal and does not affect the general
performance of this product. Stable reception will resume once the
interference ends.
The remote transmitter should be placed in a dry shaded area.
NOTE: Fog and mist will not harm the remote transmitter but
direct rain must be avoided.
Mount the remote transmitter upright avoiding metallic objects
and frames, such as window sills. Verify that there are no obstacles
like a transmission tower or steep hill that can cause interference
and blockage between the remote transmitter and receiver.
Place the receiver unit at least 2 metres away from any electrical
devices, such as your television set, computer, cordless phone, or any
radio controlled equipment.
Replace unit(s) with fresh batteries when the Low Battery Indicator
lights up. Refer to the LOW BATTERY INDICATION section.
You may need to reposition the remote transmitter to a different
location and/or closer to the receiver for the best transmission.
The is an ideal feature to be used for greenhouses
and wine cellars, or any place that you require controlled temperature.
Once activated, the temperature alarm would sound when the room gets
too warm or too cold depending on your settings.
temperature alarm
You can set both an upper and lower temperature alarm for the local
temperature (main receiver unit) and/or for each of the remote
(outdoor) channels of 1 to 4.
Scroll to the Upper Temperature Alarm Setting mode by pressing .
You should see the symbol and dotted lines ( ) or pre-existing
setting blink.
MODE
---
Scroll to the Lower Temperature Alarm Setting mode by pressing .
You should see the symbol and dotted lines ( ) or pre-existing
setting blink.
MODE
---
Select the desired channel, local or remote channels (1 to 4) using .CHN
Select the desired channel, local or remote channels (1 to 4) using .CHN
Press to finish; or rMODE epeat steps for all
other channels if desired.
Press to finish; or rMODE epeat steps for all
other channels if desired.
NOTE: In the normal clock display, when either the upper or lower
temperature alarm has been set for a particular channel, the or
symbol will show up solid on the LCD screen when that channel is displayed.
Press or key to set the desired value for the upper temperature limit.+-
Press or key to set the desired value for the lower temperature limit.+-
To disable the particular alarm, press .
The dotted lines ( ) would reappear to indicate
that the alarm has been disabled.
ALARM
---
To disable the particular alarm, press .
The dotted lines ( ) would reappear to indicate
that the alarm has been disabled.
ALARM
---
WD633 Receiver
LOW BATTERY INDICATION
Replace the batteries when the Low Battery Indication ( ) lights up on
the middle-left portion of the LCD screen on the WD633 receiver.
NOTE: After replacing the batteries, you will need to perform the Setup and
Learn Function procedures again. Refer to the SETTING UP THE
TRANSMITTER/RECEIVER and WIRELESS TRANSMISSION sections.
A
A
C
Setting the Upper Temperature Alarm
Setting the Lower Temperature Alarm
UPPER TEMPERATURE LIMIT: warmIf the temperature gets too
and reaches the upper temperature limit, the alarm would sound.
LOWER TEMPERATURE LIMIT: coldIf the temperature gets too
and reaches the lower temperature limit, the alarm would sound.
MOONPHASE
MONDAY
CLOCK1
OUT
IN
TREND
MOONPHASE
MONDAY
CLOCK1
OUT
IN
TREND
When the Temperature Alarm Sounds
The temperature alarm will sound when the actual temperature has
reached (or exceeded) the upper or lower temperature limit.
The temperature alarm has a distinctive tone different to that of
Alarm 1 or Alarm 2.
or symbol and temperature limit will blink
Press ANY key to stop the temperature alarm. Or without interruption,
the temperature alarm will automatically stop after one minute.
PAGE 4
PAGE 13
PAGE 5
PAGE 14
PAGE 6
PAGE 15
1
1
1
1
4
WT440H Remote Transmitter
Replace the batteries when the Low Battery Indication lights up on
the bottom-left corner of the LCD screen on the WT440H transmitter.
When the batteries are low on a transmitter, a Low Battery Indication
( ) will also light up on the bottom-left corner of the LCD screen on
the WD633 receiver for that particular channel.
B
C
1
B
2
MOONPHASE
MONDAY
CLOCK1
OUT
IN
TREND
TREND
1
2
3
4
5
6
Clock 1 Setting:
Clock 2 Setting:
Press and hold for 3 seconds to enter the clock setting mode. You
will hear a beep. (The CLOCK 1 symbol will appear and the time will blink).
Press to set the hour and to set the minute;
Press during clock setting to change between 12 and 24
hour display. This also will end clock setting.
Press or no key press for one minute will end clock setting.
Scroll to Clock 2 mode using . (The CLOCK 2 symbol will appear).
Press or key to change the hour (in one hour increments/decrements
relative to Clock 1)
MODE
HOUR MINUTE
ALARM/( C/ F)
MODE
MODE
+-
°°
CLOCK SETTING
145
3
26
Alarm 1 and Alarm 2 Setting:
Scroll to Alarm 1 using . The ALARM 1 symbol will appear.
Press to set the hour
Press to set the minute
Press to toggle alarm on and off.
When the alarm is set ON, the symbol
will appear and the unit will beep.
In the normal clock display, if the alarm is set ON,
the symbol will also appear on the display.
MODE
HOUR
MINUTE
ALARM
.
.
When the Alarm Sounds:
or symbol will blink.
Press to snooze the alarm for 5 minutes.
After that the alarm will sound again.
Press ANY other key to stop the alarm. Or without interruption, the
alarm will automatically stop after one minute.
SNOOZE
To set Alarm 2, scroll to Alarm 2 using .
The ALARM 2 symbol will appear. Follow the same
steps as above to set. In the normal clock display,
if the alarm is set ON, the symbol will also appear
on the display.
MODE
NOTE:BothAlarm1andAlarm2arebasedonthetimesetonClock1.
ALARM SETTING
1
1
2
2
3
3
4
5
6
TROUBLESHOOTING
The remote (outdoor) readout on the receiver is
blinking.
The remote (outdoor) readout on the receiver is
blinking. The receiver will not detect or receive
the temperature and humidity data from the
remote transmitter, even after the Manual Learn
Function has been executed.
The temperature and humidity data on the
remote transmitter does not match the data
displayed on the receiver.
The temperature and humidity data on the
remote transmitter does not match the data
displayed on the receiver.
This may also be the result of a temporary loss of reception due
to interfering sources. Normal reception should resume once
the interference ends. Refer to the WIRELESS TRANSMISSION
section.
Re-synchronize the remote transmitter and receiver by pressing
and holding on the receiver for 3 seconds until a beep is
heard. The temperature and humidity data from the remote
transmitter will display on the receiver within 3 minutes. Refer to
the WIRELESS TRANSMISSION (Manual Learn Function) section.
CHN
Ensure the remote transmitter is away from any possible source of
interference and electrical disturbances. You may try to reposition
the remote transmitter in a different location and/or closer to the
receiver. The remote transmitter does have a maximum range of
40 metres, but any walls or windows the signal has to pass through
will reduce the distance. Due to the nature of the batteries,
extreme cold temperatures may also affect the transmission range.
Refer to the WIRELESS TRANSMISSION section and repeat the
Manual Learn Function with the remote transmitter in a new
location.
This may occur when you move the remote transmitter from one
environment to another. For example, when you bring the
transmitter from inside the warm house out to the cold exterior. In
such a case, there will be a big change in temperature. The
transmitter will record this change in temperature much quicker
than it is able to transmit the data to the receiver (which is done
once every minute). Therefore, you will temporarily get a
difference in reading between the remote transmitter and receiver.
The solution is to allow the remote transmitter some time to sit in
its new location to reach equilibrium. This may take several
minutes. Once the data is stable, the data displayed on the
remote transmitter should match that displayed on the receiver.
PROBLEM SOLUTION
SPECIFICATIONS
WD633 - WEATHER STATION RECEIVER
- Battery Type: 2 X 1.5V AA batteries
- Operating Temperature: -5
- Temperature Range: -9.9
-
°C °C
°C t °C
°C °C °C
Resolution: 0.1°C
to 50
o55
- Measurement Accuracy: Max. +/- 1 within measuring range of 0 to 40
WT440H - WEATHER STATION TRANSMITTER
-Battery Type: 2 X 1.5V AA batteries
- Operating Temperature: -20°C to 60°C
- Temperature Range: -30°C to 70°C
- Temperature Resolution: 0.1°C for above -10°C / 1°C for below -10°C
- Measurement Accuracy: Max. +/- 1°C within measuring range of 0°C to 40°C
- Humidity Range: 25% to 90% RH (resolution 0.5%)
- Transmission Frequency: 433.92 MHz
- Transmission Range: up to 40 metres in open area
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
1. THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
2. THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
FCC COMPLIANCE LIMITED TWO-YEAR WARRANTY
UPM warrants this product, excluding battery, to be free from defects in the materials or workmanship, under normal
use and service, for a period of two years from the date of purchase by the consumer.
If, at any time during the warranty period, the product is defective or malfunctions, UPM shall repair or replace it (at
UPM's discretion) within a reasonable period of time.
If the product is defective,
(i) return it, with a dated proof of purchase, to the retailer from which you purchased it, or
(ii) package it carefully, along with a dated proof of purchase and a short description of the malfunction, and mail it,
postage prepaid, to the following address:
UPM Marketing Inc.
Return Goods
Unit 10B - 250 Shields Court
Markham, Ontario
L3R 9W7
This warranty does not cover removal or reinstallation costs. This warranty shall not apply if it is shown by UPM that
the defect or malfunction was caused by damage which occurred while the product was in the possession of the
consumer.
UPM's sole responsibility shall be to repair or replace the product within the terms stated above. UPM SHALL NOT BE
LIABLE FOR ANY LOSS OR DAMAGE OF ANY KIND, INCLUDING ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
RESULTING, DIRECTLY OR INDIRECTLY, FROM ANY BREACH OF ANY WARRANTY, EXPRESS OR IMPLIED, OR ANY
OTHER FAILURE OF THIS PRODUCT. Some states do not allow the exclusion or limitation of incidental or
consequential damages, so this limitation may not apply to you.
THIS WARRANTY IS THE ONLY EXPRESS WARRANTY UPM MAKES ON THIS PRODUCT. THE DURATION OF ANY
IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, IS HEREBY LIMITED TO THE TWO YEAR DURATION OF THIS WARRANTY. Some states do not allow
limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
This warranty gives you specific legal rights, and you may have other rights which may vary from state to state.
If you have any questions concerning this warranty, please write to:
UPM Marketing Inc.
Customer Service Department
Unit 10B - 250 Shields Court
Markham, Ontario
L3R 9W7
Or call 1-888-GO-TO-UPM (1-888-468-6876), Monday to Friday, from 9:00am to 5:00pm eastern.
(2)
CUSTOMER SUPPORT HOTLINE: 1-888-468-6876
2
1
6
1
4
2
5
3
3
MOON PHASE
MOON PHASE
MOON PHASE
MOON PHASE
MOON PHASE
MOON PHASE
MOON PHASE
MOON PHASE
MOON PHASE
Moon Phase Display
MOON PHASE DISPLAY
The moon phase is automatically updated according to the calendar setting.
New Moon
9
New Moon
1
Young Crescent
2
First Quarter
Waxing Gibbous
Full Moon
Waning Gibbous
Last Quarter
Old Crescent
8
7
6
5
4
3
ALARM 1
MONDAY
CLOCK1
MONDAY
CLOCK1
Alarm 1 Setting
Clock Display
PAGE 7
PAGE 16
PAGE 8
PAGE 17
PAGE 9
PAGE 18
Specyfikacje produktu
| Marka: | UPM |
| Kategoria: | Stacja pogodowa |
| Model: | WT440H Weerstation |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z UPM WT440H Weerstation, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Stacja pogodowa UPM
24 Września 2024
23 Września 2024
22 Września 2024
7 Września 2024
31 Sierpnia 2024
22 Sierpnia 2024
6 Lipca 2024
6 Lipca 2024
6 Lipca 2024
6 Lipca 2024
Instrukcje Stacja pogodowa
- Stacja pogodowa PeakTech
- Stacja pogodowa Livoo
- Stacja pogodowa Theben
- Stacja pogodowa Muse
- Stacja pogodowa Adler
- Stacja pogodowa Marquant
- Stacja pogodowa Majestic
- Stacja pogodowa Blaupunkt
- Stacja pogodowa Hyundai
- Stacja pogodowa ECG
- Stacja pogodowa Krontaler
- Stacja pogodowa TFA
- Stacja pogodowa Chauvin Arnoux
- Stacja pogodowa Minox
- Stacja pogodowa Auriol
- Stacja pogodowa Tanita
- Stacja pogodowa Vimar
- Stacja pogodowa Techno Line
- Stacja pogodowa Emos
- Stacja pogodowa Renkforce
- Stacja pogodowa Perel
- Stacja pogodowa Thomson
- Stacja pogodowa La Crosse Technology
- Stacja pogodowa Velleman
- Stacja pogodowa Pyle
- Stacja pogodowa Setti+
- Stacja pogodowa Camry
- Stacja pogodowa Greisinger
- Stacja pogodowa National Geographic
- Stacja pogodowa GoGen
- Stacja pogodowa Brandson
- Stacja pogodowa Rocktrail
- Stacja pogodowa Clatronic
- Stacja pogodowa Telefunken
- Stacja pogodowa Oregon Scientific
- Stacja pogodowa Bresser
- Stacja pogodowa Elro
- Stacja pogodowa Hama
- Stacja pogodowa Taylor
- Stacja pogodowa Netatmo
- Stacja pogodowa Optex
- Stacja pogodowa Extech
- Stacja pogodowa Denver
- Stacja pogodowa Orion
- Stacja pogodowa Levenhuk
- Stacja pogodowa Trevi
- Stacja pogodowa Lexibook
- Stacja pogodowa Eurochron
- Stacja pogodowa Sencor
- Stacja pogodowa Alecto
- Stacja pogodowa JUNG
- Stacja pogodowa Daewoo
- Stacja pogodowa ADE
- Stacja pogodowa Elgato
- Stacja pogodowa Profile
- Stacja pogodowa Ascot
- Stacja pogodowa Cresta
- Stacja pogodowa Brigmton
- Stacja pogodowa GlobalTronics
- Stacja pogodowa Jacob Jensen
- Stacja pogodowa Soehnle
- Stacja pogodowa AcuRite
- Stacja pogodowa Ventus
- Stacja pogodowa Technoline
- Stacja pogodowa Davis
- Stacja pogodowa Chacon
- Stacja pogodowa Irox
- Stacja pogodowa Konig
- Stacja pogodowa Gira
- Stacja pogodowa Day
- Stacja pogodowa ELV
- Stacja pogodowa Dexford
- Stacja pogodowa EQ3
- Stacja pogodowa Buienradar
- Stacja pogodowa Solar
- Stacja pogodowa Saxon
- Stacja pogodowa IT
- Stacja pogodowa Garni
- Stacja pogodowa HomeMatic
- Stacja pogodowa La Crosse
- Stacja pogodowa Durabase
- Stacja pogodowa Meade
- Stacja pogodowa Sempre
- Stacja pogodowa Digi-tech
- Stacja pogodowa Unitec
- Stacja pogodowa TFA Dostmann
- Stacja pogodowa Inovalley
- Stacja pogodowa Ease Electronicz
- Stacja pogodowa Mebus
- Stacja pogodowa Saphir
- Stacja pogodowa Paget Trading
- Stacja pogodowa YONO
- Stacja pogodowa Ytora
- Stacja pogodowa JDC
- Stacja pogodowa Greenure
- Stacja pogodowa PCE Instruments
- Stacja pogodowa Nasa
- Stacja pogodowa Thierry Mugler
- Stacja pogodowa ChiliTec
- Stacja pogodowa Global Water
- Stacja pogodowa Uzoli
- Stacja pogodowa Xeecom ApS
- Stacja pogodowa Marathon
- Stacja pogodowa Ea2 LABS
- Stacja pogodowa Hesdo
- Stacja pogodowa Weinberger
- Stacja pogodowa EMOS SELECT
- Stacja pogodowa Prologue
- Stacja pogodowa Gewiss
- Stacja pogodowa Browin
- Stacja pogodowa ClimeMET
- Stacja pogodowa Otio
- Stacja pogodowa Baldr
Najnowsze instrukcje dla Stacja pogodowa
15 Października 2024
9 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
7 Października 2024
7 Października 2024
7 Października 2024
6 Października 2024