Instrukcja obsługi Universal Audio 6176


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Universal Audio 6176 (20 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/20
Model 6176
Channel Strip
Universal Audio Manual Number 65-0013
Revision 1.2
Universal Audio, Inc.
www.uaudio.com
2125 Suite A, Delaware Ave.
Santa Cruz, CA 95060
(831) 466-3737 voice
(831) 466-3775 fax
www.uaudio.com
The 6176 Channel Strip
Thank you for purchasing the 6176 Channel Strip. This unit brings together 1 channel of
our 2-610 Mic Pre with an 1176 Limiter. The 610B was inspired by the microphone
preamp section of the 610 console designed by my father, M.T. “Bill” Putnam, in the
1950s. The 610 was a rotary-control console and was the first console of the modular
design. Although technologically simple compared to modern consoles, the 610
possessed a warmth and character that kept it in demand for decades. As a prominent part
of my father’s United/Western studios, the 610 was used on many classic recordings by
Frank Sinatra and Sarah Vaughan. The Beach Boys , the Doors ,Pet Sounds LA Woman
and Van Halen’s debut album were all recorded on the 610. The legendary Wally Heider
used the 610 in his remote truck for many of his best-known live recordings. At Ocean
Way Studios (formerly United), the 610 is lovingly preserved and still used in Studio B.
You may be familiar with the fact that there were many versions of the 1176 produced
throughout the years. We patterned our reproduction on the D/E versions. These versions
were characterized by the transformer input stage, LN circuitry, and the class A (1108
style) output stage. Later versions replaced the class-A output stage with a push-pull
class-AB output stage, and eventually replaced the transformer input with a differential
op-amp circuit. That highly recognizable blackface 1176 sound was best captured by the
version that we are reproducing.
In addition to the 1176LN and 2-610, Universal Audio has released reproductions of the
classic Teletronix LA-2A Leveling Amplifier and the 2108 microphone preamplifier
which is based on the 1108 line amps that were used in my father’s studios. Universal
Audio also creates software emulation’s of our vintage hardware that run on our UAD-1
DSP card as well as Digidesign’s Pro Tools platform. All of these products are designed
to meet the demands of the modern recording studio, yet retain the character of vintage
equipment.
These products have been quite an enjoyable adventure to develop and we’re sure the
next phase will be even more fun! We thank you for your support and we thank my
father, Bill Putnam.
Thank you,
Bill Putnam
IMPORTANT SAFETY INSTRUCTIONS
Before using this unit, be sure to carefully read the applicable items of these operating instructions and the
safety suggestions. Afterwards keep them handy for future reference. Take special care to follow the
warnings indicated on the unit itself, as well as in the operating instructions.
1. Water and Moisture – Do not use the unit near
any source of water or in excessively moist
environments.
2. Object and Liquid Entry Care should be
taken so that objects do not fall, and liquids are
not spilled, into the enclosure through openings.
3. Ventilation – When installing the unit in a rack
or any other location, be sure there is adequate
ventilation. Improper ventilation will cause
overheating, and can damage the unit.
4. Heat The unit should be situated away from
heat sources, or other equipment that produce
heat.
5. Power Sources – The unit should be connected
to a power supply only of the type described in
the operating instructions, or as marked on the
unit.
6. Power Cord ProtectionAC power supply
cords should be routed so that they are not likely
to be walked on or pinched by items placed upon
or against them. Pay particular attention to cords
at plugs, convenience receptacles, and the point
where they exit from the unit. Never take hold of
the plug or cord if your hand is wet. Always
grasp the plug body when connecting or
disconnecting it.
7. Grounding of the Plug – This unit is equipped
with a 3-wire grounding type plug, a plug having
a third (grounding) pin. This plug will only fit
into a grounding-type power outlet. This is a
safety feature. If you are unable to insert the plug
into the outlet, contact your electrician to replace
your obsolete outlet. Do not defeat the purpose of
the grounding-type plug.
8. Carts and Stands The unit should be used only
with a cart or stand that is recommended by the
manufacturer. The unit and cart combination
should be moved with care. Quick stops,
excessive force and uneven surfaces may cause
the unit and cart combination to overturn.
9. Wall Or Ceiling Mount – The unit should be
mounted to a wall or ceiling only as
recommended by the manufacturer.
10. Cleaning – The unit should be cleaned only as
recommended by the manufacturer.
11. Nonuse Periods – The AC power supply cord of
the unit should be unplugged from the AC outlet
when left unused for a long period of time.
12. Damage Requiring Service – The unit should be
serviced by a qualified service personnel when:
a) The AC power supply cord or the plug has
been damaged: or
b) Objects have fallen or liquid has been
spilled into the unit; or
c) The unit has been exposed to rain; or
d) The unit does not operate normally or
exhibits a marked change in performance; or
e) The unit has been dropped, or the enclosure
damaged.
13. – The user should not attempt toServicing
service the unit beyond that described in the
operating instructions. All other servicing should
be referred to qualified service personnel.


Specyfikacje produktu

Marka: Universal Audio
Kategoria: nieskategoryzowany
Model: 6176

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Universal Audio 6176, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje nieskategoryzowany Universal Audio

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Meec Tools

Meec Tools 010-084 Instrukcja

6 Października 2024
Outwell

Outwell Scenic Road 250 Instrukcja

5 Października 2024
Impact

Impact QuikBalance Instrukcja

4 Października 2024
Impact

Impact CA-112 Instrukcja

4 Października 2024
Impact

Impact LS-BHA Instrukcja

4 Października 2024
Impact

Impact LKB-5C Instrukcja

4 Października 2024
Impact

Impact RST-001 Instrukcja

4 Października 2024