Instrukcja obsługi Unicol TBM1

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Unicol TBM1 (4 stron) w kategorii Niet gecategoriseerd. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/4
WARNING
Please carefully inspect the product before assembling. If you notice any apparent damage, call your
carrier claims agent and do not continue the installation until it has been reviewed. Please watch for pinch
points. Do not put your fingers between moveable parts. Do not tamper with or disassemble any spring
loaded parts. Before installing, make sure that the supporting surface will support five times the combined
load of the solution and the hardware. Never exceed the maximum load capacity. Please also layout all
components to ensure that you have all of the required parts before proceeding (see BOM list on following
page). Use of this product for anything other than its specified use may result in failure or personal
injury. This product is intended for indoor use only. We recommend using a qualified trades person for
installation. Use an assistant or lifting equipment to lift and position products.
For support, please call: +44 (0)1865 767676 or email: sales@unicol.com
Revised 15/12/23
01865 767676
sales@unicol.com
www.unicol.com
*Please check model specific details before installing*
TBM1 / TBM2
Screen Size: Guide Max. Weight: 7 - 15” 10kg
2Revised 15/12/23
COMPONENTS
01865 767676
sales@unicol.com
www.unicol.com
INSTALLERS REQUIRED
1
# DESCRIPTION QTY
1Backing Plate 1
2Front Cover 1
3M4 x 12mm Button Head Screws 2
#TOOLS REQUIRED
14mm Allen Keys
2Pozi Head Screwdriver
1
2
01865 767676
sales@unicol.com
www.unicol.com
3
Revised 15/12/23
STEP 1
Fix backing plate onto wall by bolting through the
4 central fixings highlighted above. Once fitted,
please fit any cabling, power, PoE or any other small
devices.
STEP 2
Place the tablet into the backing plate and cable up
as required.
STEP 4
Secure the front cover by tightening the top and
bottom screws using an allen key.
STEP 3
Once cabled up and resting in place, fit the front
cover over the tablet and backing plate, lining up the
fixing holes with the holes at the top and bottom of
the backing plate.

Specyfikacje produktu

Marka: Unicol
Kategoria: Niet gecategoriseerd
Model: TBM1

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Unicol TBM1, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niet gecategoriseerd Unicol

Unicol

Unicol TBM1 Instrukcja

9 Października 2024

Instrukcje Niet gecategoriseerd

Najnowsze instrukcje dla Niet gecategoriseerd

Teka

Teka FS 602 4GG Instrukcja

9 Października 2024
Teka

Teka FS 902 5GG Instrukcja

9 Października 2024
Neewer

Neewer X14 III Instrukcja

9 Października 2024
Teka

Teka TR 750 Instrukcja

9 Października 2024
Teka

Teka TR 550 Instrukcja

9 Października 2024
Teka

Teka RSL 41150 BU Instrukcja

9 Października 2024
Danby

Danby WFF176W Instrukcja

9 Października 2024
Bartscher

Bartscher 500387 Instrukcja

9 Października 2024
Hartke

Hartke Chorus HC33 Instrukcja

9 Października 2024