Instrukcja obsługi Uni-T LM570LD-II
Uni-T
wskaźnik laserowy
LM570LD-II
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Uni-T LM570LD-II (2 stron) w kategorii wskaźnik laserowy. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/2
1
23
4
5
P N 110401109312X/ :
PREFACE
Thank you for purchasing this brand new product. In order to use this product
safely and correctly, please read this manual thoroughly, especially the safety
notes.
After reading this manual, it is recommended to keep the manual at an easily
accessible place, preferably close to the device, for future reference.
LIMITED WARRANTY AND LIABILITY
Uni-Trend guarantees that the product is free from any defect in material and
workmanship within one year from the purchase date. This warranty does not
apply to damages caused by accident, negligence, misuse, modification,
contamination or improper handling. The dealer shall not be entitled to give any
other warranty on behalf of Uni-Trend. If you need warranty service within the
warranty period, please contact your seller directly.
Uni-Trend will not be responsible for any special, indirect, incidental or
subsequent damage or loss caused by using this device.
PRODUCT APPEARANCE
1. Laser emission window
2. Power/lock switch
3. Battery compartment
4. 1/4 inch adapter screw hole
5. Laser switch
SAFETY INSTRUCTION
To use the product properly, please read the user manual and safety information
thoroughly before use. Users must fully understand and observe all the
instructions.
Notes:
Do not expose eyes to the laser beam during operation. Prolonged exposure
to the laser beam may cause eye damage.
Some product set provide with accessory glasses. Please note that this kind
of glasses is not safety glasses. It only helps user to easily identify the laser
beam in strong ambient light or far away from the laser meter source.
Warnings:
The following print (or label) shown on the product describes safety and
related disposal information.
Never stare into at the laser beam directly or observing it by any optical
instrument. Do not set the meter at a visual height (to avoid injury caused by
exposing eyes to laser beam).
Do not disassemble or modify the laser meter in any way. No inner parts can
be repaired by users. Unauthorized modifications may emit harmful laser
radiation.
Keep the laser meter away from children or danger may occur. Class II laser
should not be observed for more than 2s.
OPERATION MODE
Tap the laser switch on the top or toggle the power/lock switch to turn on the
meter and the laser line.
only when the meter's pendulum is locked, tap the laser switch can Note:
turn off the meter and laser line.
Manual Mode
After the meter is turned on, manual mode will be enabled when the pendulum
is in locked position. The laser line can set to different angles as needed. Note:
In the manual mode, the laser line cannot be horizontal/vertical reference.
In the manual mode, self-leveling mode is turned off. The laser line flashes
every 5s to indicate that manual mode has been turned on.
MAINTENANCE
The meter has been carefully calibrated and packaged according to various
precise specifications before leaving the factory. It is recommended to
perform accuracy test before the first-time use and perform test regularly,
especially during high precision requirements.
Turn the meter off and make sure the pendulum is locked when it is not in use.
In the manual mode, the self-leveling mode is off, which means the laser
beam cannot be horizontal/vertical reference.
Do not short-circuit the battery contacts, charge the alkaline battery, or throw
the battery into fire, these actions may cause dangerous accidents.
Do not use old and new batteries simultaneously. Be sure to replace all of
them with the same type of batteries in same brand.
Keep the battery out of the reach of children.
Remove the batteries if the meter is not in use for long period.
Do not expose the meter to sunlight or high
temperatures. The meter shell and some parts are made of plastic, which
may be damaged in high temperature environments.
Clean the outer plastic parts with a damp cloth. It is not recommended to
clean it with dissolvent. Wipe away moisture with a dry soft cloth before
putting the meter into the box.
Store the meter properly in its carrying bag or package. Remove the batteries
during long-time storage to avoid battery leakage.
Do not dispose the meter into household trash. Dispose the battery or related
electronic waste according to local laws and WEEE (Waste Electrical and
Electronic Equipment) rules.
Model
Laser type
Laser wave length
Laser power
Laser class
Number of laser lines
Horizontal/Vertical accuracy
Laser line width
Horizontal/Vertical emission angle
Working distance (Line)
Operating temperature range
Storage temperature range
Self-leveling time
Self-leveling range
Battery type
Product size
Net weight
Operating time
Standard accessories
LM570LD-II
Green laser LD
520nm±5nm
20mW
Class II
2
≤±3mm @ 10m
<4mm/10m (at 80~100lux indoor)
≥120°
10m (at 30~100lux indoor)
-10°C~+40°C
-20°C~+70°C
3s
3°±1°
2*1.5V AA (LR6)
85.5mm x 62mm x 90.3mm
0.24kg ±5%
4h (all lasers on)
Device, wall mount, manual,
carrying bag, package, batteries
Self-leveling Mode
Self-leveling mode can only be turned on when the meter pendulum is unlocked.
The laser line will flash quickly at a frequency of 2Hz to indicate its operating
mode/state when the meter exceeds self-leveling working range (3°±1°).
In the self-leveling mode, its full-time pulse function can be used normally with
the laser receiver.
TECHNICAL SPECIFICATIONS
Specyfikacje produktu
| Marka: | Uni-T |
| Kategoria: | wskaźnik laserowy |
| Model: | LM570LD-II |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Uni-T LM570LD-II, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje wskaźnik laserowy Uni-T
2 Października 2024
2 Października 2024
2 Października 2024
2 Października 2024
2 Października 2024
2 Października 2024
2 Października 2024
2 Października 2024
2 Października 2024
2 Października 2024
Instrukcje wskaźnik laserowy
- wskaźnik laserowy Leica
- wskaźnik laserowy Milwaukee
- wskaźnik laserowy SilverCrest
- wskaźnik laserowy Bosch
- wskaźnik laserowy Parkside
- wskaźnik laserowy Toolcraft
- wskaźnik laserowy Nedis
- wskaźnik laserowy Stanley
- wskaźnik laserowy Black & Decker
- wskaźnik laserowy Speed-Link
- wskaźnik laserowy DeWalt
- wskaźnik laserowy Makita
- wskaźnik laserowy Nikon
- wskaźnik laserowy Hilti
- wskaźnik laserowy Carson
- wskaźnik laserowy Hama
- wskaźnik laserowy Cameo
- wskaźnik laserowy Kaiser
- wskaźnik laserowy Stabila
- wskaźnik laserowy Klip Xtreme
- wskaźnik laserowy PowerPlus
- wskaźnik laserowy Stairville
- wskaźnik laserowy Skil
- wskaźnik laserowy Laserliner
- wskaźnik laserowy GPO
- wskaźnik laserowy ADA
- wskaźnik laserowy Tacklife
- wskaźnik laserowy Kensington
- wskaźnik laserowy Connect IT
- wskaźnik laserowy Steren
- wskaźnik laserowy Melinera
- wskaźnik laserowy Laserworld
- wskaźnik laserowy Kreator
- wskaźnik laserowy Meopta
- wskaźnik laserowy Perfect Choice
- wskaźnik laserowy Prexiso
- wskaźnik laserowy Picotronic
Najnowsze instrukcje dla wskaźnik laserowy
9 Października 2024
9 Października 2024
7 Października 2024
7 Października 2024
7 Października 2024
7 Października 2024
7 Października 2024
7 Października 2024
5 Października 2024
5 Października 2024