Instrukcja obs艂ugi Ultimaker 2+
Przeczytaj poni偶ej 馃摉 instrukcj臋 obs艂ugi w j臋zyku polskim dla Ultimaker 2+ (46 stron) w kategorii Printer. Ta instrukcja by艂a pomocna dla 8 os贸b i zosta艂a oceniona przez 2 u偶ytkownik贸w na 艣rednio 4.5 gwiazdek
Strona 1/46
Ultimaker 2+
Installation and user manual
Original manual v2.0 2019
2
Disclaimer
Please read and understand the contents of this installation and user manual carefully. Failure to read the manual
may lead to personal injury, inferior results or damage to the Ultimaker 2+. Always make sure that anyone who
uses the 3D printer knows and understand the contents of the manual and makes the most out of the Ultimaker 2+
or Ultimaker 2 Extended+.
The conditions or methods used for assembling, handling, storage, use or disposal* of the device are beyond our control
and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim
liability for loss, injuries, damage, or expense arising out of or in any way connected with the assembly, handling, storage,
use or disposal of the product.*
The information in this document was obtained from sources which we believe are reliable. However, the information is
provided without any warranty, express or implied, regarding its correctness.
Intended use Ultimaker 2+
Ultimaker 3D printers are designed and built for fused deposition modeling with Ultimaker engineering thermoplastics
within a commercial/business environment. The mixture of precision and speed makes the Ultimaker 3D printers the
perfect machine for concept models, functional prototypes and the production of small series. Although we achieved a
very high standard in the reproduction of 3D models with the usage of Ultimaker Cura, the user remains responsible to
qualify and validate the application of the printed object for its intended use, especially critical for applications in strictly
regulated areas like medical devices and aeronautics. While being an open material platform the best results will be
achieved with Ultimaker certified material, while effort has been made to match material properties with machine settings.
* We comply to the WEEE-directive.
Copyright 漏 2019 Ultimaker. All rights reserved worldwide.
This language version of the manual is verified by the manufacturer (Original manual).
No part of this publication, including pictures may be reproduced and/or made public, whether by printing, photocopying, microfilm or by
any other means whatsoever, without the prior written permission of Ultimaker.
3
Table of Contents
1. Safety and compliance 6
Safety messages 7
Hazards 8
2. Introduction 9
Main components Ultimaker 2 or Ultimaker 2 Extended+ 10
Specifications 11
3. Unpack and install the hardware 12
Unboxing 13
Installing the hardware accessories 15
4. Set up for 顮俽st use 17
Build plate leveling 18
Loading material 19
Installing Ultimaker Cura 20
5. Operation 21
Control and display 22
Material 23
Preparing a print with Ultimaker Cura 24
Starting a print 25
Removing the print 26
Changing the material and nozzle 27
6. Maintenance 28
Update the firmware 29
Build plate calibration 30
Storage and handling of materials 31
Hardware maintenance 32
Clean the printer 33
Lubricate the axles 36
Check for play on axles 37
Check for tension of short belts 38
Lubricate the lead screw of the Z motor 39
Retighten the hot-end isolator 40
Clean the feeder and replace the Bowden tube 41
7. Troubleshooting 42
Error messages 43
Clogged nozzle 44
Print quality issues 46
Specyfikacje produktu
Marka: | Ultimaker |
Kategoria: | Printer |
Model: | 2+ |
Kolor produktu: | Czarny |
Szeroko艣膰 opakowania: | 134 mm |
Wysoko艣膰 opakowania: | 650 mm |
G艂臋boko艣膰 opakowania: | 420 mm |
Certyfikat 艣rodowiskowy (zr贸wnowa偶onego rozwoju): | ENERGY STAR |
Wbudowane g艂o艣niki: | Nie |
Typ HD: | Full HD |
Typ ekranu: | LED |
D艂ugo艣膰 przek膮tnej ekranu: | 24 " |
Rozdzielczo艣膰: | 1920 x 1080 px |
Wsp贸艂czynnik kontrastu (typowy): | 1000:1 |
Natywne proporcje obrazu: | 16:9 |
Ekran dotykowy: | Nie |
Przewody: | VGA |
Pob贸r mocy w trybie czuwania: | - W |
Kompatybilno艣膰 3D: | Nie |
Pob贸r mocy: | 34 W |
Waga wraz z opakowaniem: | 5600 g |
Ilo艣膰 port贸w DVI-D: | 1 |
Jasno艣膰 wy艣wietlacza (typowa): | 250 cd/m虏 |
Wsp贸艂czynik kontrastu (dynamiczny): | 12000000:1 |
K膮t widzenia (poziomy): | 170 掳 |
K膮t widzenia (pionowy): | 160 掳 |
Kolory wy艣wietlacza: | 16.78 million贸w kolor贸w |
Czas odpowiedzi (typowy): | 5 ms |
Rozmiar plamki: | 0.276 x 0.276 mm |
Rozmiar obrazu (w poziomie): | 531.36 mm |
Rozmiar obrazu (w pionie): | 298.89 mm |
Wbudowana kamera/aparat: | Nie |
Standard VESA: | Tak |
Interfejs do monta偶u panelu: | 100 x 100 mm |
Kensington Lock: | Tak |
Zakres k膮ta nachylenia: | -5 - 15 掳 |
Liczba port贸w VGA (D-Sub): | 1 |
HDCP: | Tak |
Zu偶ycie energii w trybie energooszcz臋dnym: | 0.3 W |
Szeroko艣膰 (bez podstawy): | 579.39 mm |
G艂臋boko艣膰 (bez podstawy): | 179.12 mm |
Wysoko艣膰 (bez podstawy): | 436.49 mm |
Waga (bez podstawy): | 4100 g |
Zasi臋g skanowania w poziomie: | 30 - 83 kHz |
Zasi臋g skanowania (d艂ugo艣膰): | 50 - 76 Hz |
Obs艂ugiwane rozdzielczo艣ci grafiki: | 1920 x 1080 (HD 1080) |
Wbudowany tuner tv: | Nie |
Port DVI: | Tak |
Liczba j臋zyk贸w OSD: | 17 |
Powierzchnia wy艣wietlacza: | Po艂ysk |
Format obrazu: | 16:9 |
Zainstalowano Thin Client: | Nie |
Potrzebujesz pomocy?
Je艣li potrzebujesz pomocy z Ultimaker 2+, zadaj pytanie poni偶ej, a inni u偶ytkownicy Ci odpowiedz膮
Instrukcje Printer Ultimaker
14 Sierpnia 2024
13 Sierpnia 2024
Instrukcje Printer
- Printer Sony
- Printer Samsung
- Printer Sharp
- Printer Epson
- Printer Roland
- Printer Panasonic
- Printer Canon
- Printer Fujifilm
- Printer Toshiba
- Printer Citizen
- Printer HP
- Printer Brother
- Printer Honeywell
- Printer Kodak
- Printer Primera
- Printer Xerox
- Printer Godex
- Printer Olivetti
- Printer Zebra
- Printer Dell
- Printer Digitus
- Printer Kyocera
- Printer Ricoh
- Printer Seiko
- Printer Thomson
- Printer Panduit
- Printer Olympus
- Printer OKI
- Printer Mitsubishi
- Printer Intermec
- Printer NEC
- Printer Polaroid
- Printer Konica Minolta
- Printer Bixolon
- Printer Pantum
- Printer Datamax O'Neil
- Printer DNP
- Printer TSC
- Printer HiTi
- Printer Lexmark
- Printer Sagem
- Printer Nilox
- Printer Royal Sovereign
- Printer Oce
- Printer Paxar
- Printer Metapace
- Printer Toshiba TEC
- Printer Frama
- Printer Star Micronics
- Printer Posiflex
- Printer Dascom
Najnowsze instrukcje dla Printer
19 Wrze艣nia 2024
19 Wrze艣nia 2024
19 Wrze艣nia 2024
19 Wrze艣nia 2024
19 Wrze艣nia 2024
18 Wrze艣nia 2024
17 Wrze艣nia 2024
16 Wrze艣nia 2024
16 Wrze艣nia 2024
16 Wrze艣nia 2024