Instrukcja obsługi Ubiquiti Networks EdgeRouter Lite

Ubiquiti Networks router EdgeRouter Lite

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ubiquiti Networks EdgeRouter Lite (20 stron) w kategorii router. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/20
3-Port Router
Model: ERLite-3
Introduction
Thank you for purchasing the Ubiquiti Networks® EdgeRouter
Lite. This Quick Start Guide is designed to guide you through
installation and also includes warrantyterms.
Package Contents
et h0 et h1 et h2
EdgeRouter Lite
Screws
(M2.9x20, Qty. 2)
Screw Anchors
(M2.9, Qty. 2)
3-Port Router
Model: ERLite-3
Power Adapter
(12V, 1A)
Power Cord Quick Start Guide
TERMS OF USE: All Ethernet cabling runs must use CAT5 (or above). It is the customer’s
responsibility to follow local country regulations and indoor cabling requirements.
Hardware Overview
Front Panel Ports
et h 0 et h1 et h 2
Console ResetEthernet (eth0-eth2)
Interface Description
Console
RJ45 serial console port for Command
Line Interface (CLI) management. Use a
RJ45‑to‑DB9, serial console cable, also
known as a rollover cable, to connect the
Console port to your computer. (If your
computer does not have a DB9 port, then
you will also need a DB9 adapter.) Then
configure the following settings as needed:
Baud rate 115200
8Data bits
NONEParity
1Stop bits
NONEFlow control
Ethernet
(eth0‑eth2) 10/100/1000 Mbps Ethernet ports.


Specyfikacje produktu

Marka: Ubiquiti Networks
Kategoria: router
Model: EdgeRouter Lite

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Ubiquiti Networks EdgeRouter Lite, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje router Ubiquiti Networks

Instrukcje router

Najnowsze instrukcje dla router