Instrukcja obsługi Tunturi Platinum Cross Sprinter

Tunturi rower elektryczny Platinum Cross Sprinter

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Tunturi Platinum Cross Sprinter (76 stron) w kategorii rower elektryczny. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/76
U S E R M A N U A L
2
English
Contents
Installation -
Important safety instructions 2
Console 3
Assembly 4
Moving and storage 9
Fitness -
Basics on exercising 9
Heart rate 9
Maintenance -
Maintenance 9
Management mode 10
Troubleshoot 10
Technical data 10
Product information -
Exploded view 74
Parts list 75
Welcome to the world of Tunturi exercising!
Your choice shows that you really want to invest in your
well being and condition; it also shows you really value
high quality, safe and motivating product as your training
partner. Whatever your goal in training, we are certain
this is the training equipment to get you there. You’ll find
information about using your exercise equipment and
what makes for efficient training at Tunturi’s website at
WWW.TUNTURI.COM
Important Safety Instructions
This owner’s manual is an essential part of your training
equipment: reading all instructions in this manual before
you start using this appliance. The following precautions
must always be followed.
Note about your health
• Before you start any training, consult a physician to
check your state of health.
• If you experience nausea, dizziness or other abnor-
mal symptoms while exercising, stop your workout at
once and consult a physician.
• To avoid muscular pain and strain, begin each
workout by warming up and end it by cooling down
(slow pedaling at low resistance). Don’t forget to
stretch at the end of the workout.
Note about the exercise environment
• The equipment is not to be used outdoors.
• Place the equipment on a firm, level surface. Place
the equipment on a protective base to avoid any
damages to the floor beneath the equipment.
• Make sure that the exercising environment has
adequate ventilation. To avoid catching cold, do not
exercise in a draughty place.
• In training, the equipment tolerates an environment
measuring +10°C to +35°C. The equipment can
be stored in temperatures ranging between -15°C
and +40°C. Air humidity in the training or storage
environment must never exceed 90%.
• Keep hands away from all moving parts.
Note about the equipment
• If children are allowed to use the equipment, they
should be supervised and taught to use the equipment
properly, keeping in mind the child’s physical and
mental development and their personality.
• Before you start using the equipment, make sure that
it functions correctly in every way. Do not use faulty
equipment.
• Press the keys with the tip of the finger; your nails may
damage the key membrane.
• Never lean on the interface.
• Never remove the side covers. Do not step on the
frame casing.
• Only one person may use the equipment at a time.
• Hold the stationary handlebar for support when get-
ting on or off the equipment.
• Wear appropriate clothing and shoes when exerci-
sing.
• Protect the meter from sunlight and always dry the
surface of the meter if there are any drops of sweat
on it.
• Further information on warranty terms can be found in
the warranty booklet included with the product.
• Please note that the warranty does not cover damage
due to shipping or negligence of adjustment or main-
tenance instructions described in this manual.
• The equipment must not be used by persons weighing
over 150 kg.
• Make sure the equipment is unplugged before car-
rying out any assembly or maintenance procedures.
• Do not attempt any servicing or adjustments other
than those described in this guide. Everything else
must be left to someone familiar with the maintenance
of electromechanical equipment and authorized
under the laws of the country in question to carry out
maintenance and repair work.
• Never drop or insert any object into any openings.
SAVE THIS INSTRUCTION MANUAL
3
Cross sprinter
Operation
• Power the console on by pressing any key.
• Enter Quick start operation by simply pressing the
start key. The time will count up from zero.
• You may set a workout time by using the Time up
and down keys. When you press the Start key the
time will count down to zero from the set time. After
pressing start you can use the up and down keys to
switch the time to count up or count down.
• Press the start/stop button to Pause the timer and also
to resume the timer when it is in Pause mode.
• Press the Reset key to reset all the data.
• For Heart Rate readings you must wear a heart rate
transmitter. The console will pick up the transmitter
signal and display your heart rate automatically.
Console
The power for the console is provided by 3 AA alkaline
batteries (provided) and will operate on rechargeable
NiCd AA batteries. Once the batteries are installed the
console will power on, the Time window will display the
total usage time, the Distance window will display the
total usage distance reading and the RPM window will
display the software version. The usage time shows how
long the elliptical has been in use and the distance shows
how many virtual miles the elliptical has gone.
If the console does not detect a speed signal, or key
activations, it will go to sleep to protect battery life. To
wake the console up you can press any key.
Function keys
1. Start/Stop: Starts and stops the program timer.
2. Time - (Down): Used to set workout time before the
start key is pressed. The down key will decrease the
time setting by 1 minute for each key press. The time
will change more rapidly when the key is held down
for 2 seconds. The key is also used to switch the time
reading to count down (remaining time).
3. Reset: Performs a complete reset of the console.
4. Time + (up): Used to set workout time before the start
key is pressed. The up key will increase the time
setting by 1 minute for each key press. The time will
change more rapidly when the key is held down for
2 seconds. The key is also used to switch the time
reading to count up (elapsed time).
Display
5. Time: Displays workout time two ways; either count
up (accumulated time) or count down (remaining
time), depending on your preference selected before
starting the timer.
6. RPM: Displays the current pedaling speed as Revoluti-
ons Per Minute.
7. Distance: Displays virtual distance traveled in miles
or kilometers (units selected through Management
Mode, see page 9 for details).
8. Heart Rate: Displays heart rate in beats per minute
when a heart rate chest belt transmitter is worn and
detected by the console. The heart rate receiver is
compatible with Polar coded transmitters.

Specyfikacje produktu

Marka: Tunturi
Kategoria: rower elektryczny
Model: Platinum Cross Sprinter

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Tunturi Platinum Cross Sprinter, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje rower elektryczny Tunturi

Tunturi

Tunturi Platinum Cross Sprinter Instrukcja

26 Sierpnia 2024

Instrukcje rower elektryczny

Najnowsze instrukcje dla rower elektryczny

Cecotec

Cecotec Flexy Instrukcja

25 Grudnia 2024
Cecotec

Cecotec Mountain Millor Instrukcja

25 Grudnia 2024
Nilox

Nilox City SL5 Instrukcja

11 Grudnia 2024
Nilox

Nilox Iren City Instrukcja

11 Grudnia 2024
Scott

Scott Axis 20 Wave Instrukcja

10 Grudnia 2024
Scott

Scott Axis 10 Wave Instrukcja

10 Grudnia 2024
Hiboy

Hiboy EX7 Instrukcja

9 Października 2024
Qwic

Qwic MD11 Speed Instrukcja

8 Października 2024
EMG

EMG Speedy Instrukcja

7 Października 2024
EMG

EMG Rebel Instrukcja

7 Października 2024