Instrukcja obsługi Trust VibraForce Feedback Sight Fighter 850F

Trust Kontroler VibraForce Feedback Sight Fighter 850F

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Trust VibraForce Feedback Sight Fighter 850F (5 stron) w kategorii Kontroler. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/5

TRUST 850F VIBRAFORCE FEEDBACK SIGHTFIGHTER

U K

Instructions when using for the first time Chapter

1. Uninstalling old drivers and devices (3.1)

2. Installing the driver in Windows (3.2)

3. Installing DirectX 8.1 in Windows (3.3)

4. Connecting the gamepad (3.4)

5. Use (4)

1 Introduction

This instruction manual is for users of the TRUST 850F VIBRAFORCE FEEDBACK

SIGHTFIGHTER. The TRUST 850F VIBRAFORCE FEEDBACK SIGHTFIGHTER

can be used to play games. The built-in Vibration Feedback function gives the

gamepad increased realism and better control over the games.

2 Safety

Carefully read the following instructions before use:

- The TRUST 850F VIBRAFORCE FEEDBACK SIGHTFIGHTER does not

require any special maintenance. Use a slightly damp, soft cloth to clean the

gamepad.

- Do not use aggressive substances, such as petrol or white spirit, to clean the

device. These may harm the material.

- Do not submerge the device in liquid. This may be dangerous and will

damage the device. Do not use this device near water.

- Make sure nothing is placed on the cable. Do not use this device in an area

where the cable can become worn or damaged as a result of people walking

over it.

- Do not repair this device yourself. If you open this device, you may touch live

components.

- Under the following circumstances, have the device repaired by qualified

personnel:

- The cable or plug is damaged or worn.

- The device has come into contact with rain, water or another liquid.

2.1 Vibration Feedback

Note: Playing games using the Vibration Feedback function for long

periods of time may eventually lead to physical injury. It is

strongly recommended to take a break after playing for no

longer than one hour or to temporarily turn off the Vibration

Feedback function. The Vibration Feedback function can be

turned off in the ‘Game Controller’ settings in the Windows

Control Panel. See chapter 4.2 for more information concerning

turning off the vibration.

TRUST 850F VIBRAFORCE FEEDBACK SIGHTFIGHTER

3 Installation

3.1 Uninstalling old drivers and devices

The most common cause of faults during installation is the presence of a driver for a

similar, old device. The best solution is to first remove all drivers related to old

devices before installing the new driver. Make sure you only delete programs for old,

unused (similar) devices.

1. Enter the Windows ‘Safe Mode’. (Press F8 when starting Windows before the

Windows start screen is displayed and select ‘Safe Mode’.)

2. Click on ‘Start – Settings – Control Panel’ and double-click on the

‘Add/Remove Programs’ icon.

3. Find all the programs for similar, old devices and remove these by clicking on

the ‘Add/Remove’ button. When in the ‘Safe Mode’, it is possible for some

programs to appear twice. In that case, remove all the programs which

appear twice.

4. Restart the computer.

3.2 Installing the driver in Windows 98 / Windows ME /

Windows 2000 / Windows XP

Note: The latest driver can be downloaded from www.trust.com/13017.

Check whether a new driver is available and use this for the

installation.

Note: Make sure all other programs (except Windows) are closed

during the installation.

Note: During installation in Windows 2000 and Windows XP, you may

receive a message saying that the driver has not been signed.

This does not cause a problem for the functionality. Continue

with the installation.

1. Start Windows.

2. Insert the CD-ROM containing the drivers and applications into your CD-ROM

drive.

3. The Trust Software Installer will start automatically (see figure 1). If it does

not start automatically, click on ‘Start – Run’, type [D:\SETUP.EXE] and click

on ‘OK’.

Note: In the example, ‘D’ is used to indicate the CD-ROM drive. Check

which letter is used to indicate your CD-ROM drive.

4. Click on ‘TRUST 850F DRIVER 3.0’ to start the installation of the driver (see

figure 1).

5. The installation window will appear (see figure 2). Click on ‘Next’ and follow

the on-screen instructions.

6. Restart your system after the driver has been installed.

3.3 Installing Microsoft DirectX 8.1

Note: The latest version of DirectX can be downloaded from

www.microsoft.com/directx.

Note: DirectX 8.1 is included as standard in Windows XP. You,

therefore, do not have to install this in Windows XP.

TRUST 850F VIBRAFORCE FEEDBACK SIGHTFIGHTER

U K

Installing DirectX 8.1 will give you the best support for the Vibration Feedback

functions in games. Follow the instructions given below to do this.

1. Follow points 1 to 3 in chapter 3.2 to start the Trust Software Installer (see

figure 1).

2. Click on ‘MICROSOFT DIRECTX 8.1’ to start the installation.

3. Follow the on-screen instructions.

4. Restart your computer after the installation.

3.4 Connecting the Trust 850F gamepad

You can connect the 850F VibraForce Feedback SightFighter to your computer after

installing the driver and DirectX 8.1. Follow the instructions given below.

1. Start Windows.

2. Connect the gamepad’s USB cable to a free USB port on your computer.

3. Windows will detect new hardware and automatically install the correct driver.

In Windows 2000 and Windows XP, select the option to automatically search

for the best driver.

Note: During installation in Windows 2000 and Windows XP, you may

receive a message saying that the driver has not been signed.

This does not cause a problem for the functionality. Continue

with the installation.

Your Trust 850F VibraForce Feedback SightFighter has now been installed. See the

next chapter for instructions on how to test the gamepad.

4 Use

4.1 Gamepad functions

See the table below and figure 3 for a description of the various gamepad functions.

Function Description

ADirection pad for steering in 8 different directions (operates the

x-axis and the y-axis in game controllers).

BThrottle (operates the 3rd axis in game controllers).

CRudder (operates the 4th axis in game controllers).

DAction button 1

EAction button 2

FAction button 3

GAction button 6

HAction button 5

IAction button 4

JAction button 8

KAction button 7

Two motors are built into the gamepad for the Vibration Feedback function. The

vibration can be adjusted via the ‘Game Controller’ settings in the Windows Control

Panel. See chapter 4.2 for more information.

Specyfikacje produktu

Marka:	Trust
Kategoria:	Kontroler
Model:	VibraForce Feedback Sight Fighter 850F
Długość kabla:	2.5 m
Technologia łączności:	Przewodowa
Liczba przycisków:	8
System operacyjny:	Win 98 / ME / 2000 / XP
Typ napędu:	Gamepad
Minimalne wymagania systemowe:	CD ROM
Minimalna ilość pamięci RAM:	32 MB
Minimalna ilość miejsca w pamięci komputerowej:	60 MB
Minimalny procesor:	Pentium 166 MMX
Wibracje:	Tak
D-pad (krzyżak):	Tak