Instrukcja obsługi Trust DC-4700 PowerCam

Trust Aparat cyfrowy DC-4700 PowerCam

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Trust DC-4700 PowerCam (25 stron) w kategorii Aparat cyfrowy. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/25
Quick Start for using camera
1) Identifying the parts
- Knowing your camera and its features
Rear Elevation
z Mode Dial
z Optical Viewfinder
z Zoom Key
z Strap Holder ringlet
z AF & Flash LEDs
z Menu Key
z Rubber grip
z Control Pad
z Display Key
z LCD panel
z Mode Dial
z Flash
z AF assisted LED
z Optical ViewFinder
z Self-Timer LED
z Zoom Lens
Front Elevation
SD and Battery Compartment
z Strap holder ringlet
z USB rubber cover
Mini USB interface
z SD MemoryCard and
Battery compartment
door
End Elevation
2) Install the battery pack
- Be sure to turn off your camera when open the battery/SD compartment cover
1. Open the battery/SD compartment cover by sliding the cover in the direction of the arrow
2. Insert the battery card from battery bay
3. Close the battery/SD compartment cover
Open battery compartment
cover on the digital camera
side.
Insert the Battery pack
Close battery compartment
cover.
3
2
1
Push In
3) Taking Pictures
1. Turn the Mode Dial to (Still Image Capturing mode), and LCD will
be automatically turned on with a red focus cursor in the center.
2. Frame your subject in your preferred pose and hold the camera steadily with
both hands Shutter button
3. Ensure the lens and flash are not blocked by your finger or strap.
4. Press and hold the shutter button halfway down to lock the focusing on the subject. When the
focus cursor turned to green, the focus has been adjusted and is ready for image capturing.
5. Press the shutter button fully to capture the image.
4) Replay recorded image/video
1. Turn the Mode Dial at the top to Playback mode, and LCD will be turned on and display
9-index of stored pictures
2. Press cdef to select the picture/video, and then press OK to enlarge the picture/video, and
then can use ef to scroll the pictures or press to return to 9-index
Note: denotes there is voice memo recorded with the image file
denotes this is a video file
5) Installing USB Driver Software (For Windows 98SE only)
-Install the software only if you are using Windows 98SE. If you are using Windows ME/2000/XP, you
do not need to install it.
- Do not connect the Camera to your Computer before installing the Camera Driver.
1. Turn on your computer and start Windows
2. Insert the Driver CD-ROM supplied into the
CD-ROM drive. To USB
Connector on PC
3. The installation program will start automatically. If
the installation program does not start automatically,
go to your desktop and double click on My
Computer Æ CD-ROM to start it.
4. Click the “Camera Driver” to start installing the driver.
5. Reboot your computer after the installation completes.
6. After restarting, connect the camera and PC using the USB cable supplied and turn on the camera.
Windows will locate the driver and complete the installation.


Specyfikacje produktu

Marka: Trust
Kategoria: Aparat cyfrowy
Model: DC-4700 PowerCam

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Trust DC-4700 PowerCam, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Aparat cyfrowy Trust

Trust

Trust 1210k Instrukcja

26 Września 2024
Trust

Trust dc-4200 Instrukcja

24 Września 2024
Trust

Trust 970z Instrukcja

24 Września 2024
Trust

Trust 350ft Instrukcja

23 Września 2024
Trust

Trust 350fs Instrukcja

23 Września 2024
Trust

Trust dc-3500 Instrukcja

17 Września 2024
Trust

Trust 1290z Instrukcja

16 Września 2024
Trust

Trust 97oz Powercam Instrukcja

16 Września 2024
Trust

Trust 1220s Instrukcja

16 Września 2024

Instrukcje Aparat cyfrowy

Najnowsze instrukcje dla Aparat cyfrowy