Instrukcja obsługi Tripp Lite PDUMH32HVATNET


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Tripp Lite PDUMH32HVATNET (88 stron) w kategorii Listwa zasilająca. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/88
Owner’s Manual
Automatic Transfer Switch PDU
Models:
PDUMH30AT, PDUMH30ATNET, PDUMNH30AT2, PDUMH30HVAT,
PDUMH30HVATNET, PDUMNH30HVAT2, PDUMH32HVAT,
PDUMH32HVATNET, PDUMNH32HVAT2
Agency Model Numbers:
AGAC8033 AGAC8034 AGAC8110 AGAC8073 AG-0150 AG-0151
Important Safety Instructions 2
Feature Set Overview 4
Installation 4
Mounting the PDU 4
Connecting the PDU 7
Features 8
LED Diagrams 15
Configuration and Operation 19
Automatic Transfer Switch 19
Service 21
Warranty and Product Registration 22
Español 23
Français 45
Русский 67
WARRANTY REGISTRATION
Register your product today and be
automatically entered to win an ISOBAR®
surge protector in our monthly drawing!
tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support
Copyright © 2021 Tripp Lite. All rights reserved.
2
Important Safety Instructions
This manual contains information concerning the proper
installation and use of Tripp Lite’s Rackmount Power Strips.
SAVE THESE INSTRUCTIONS.
Do not connect your power strip to an ungrounded outlet. Do not
use it with extension cords or adapters that eliminate its
connection to ground. Your power strip is designed for indoor use
only. Install it away from heat emitting devices such as radiators
and heat registers. Do not install where excessive moisture or
other conductive contaminants are present. Never install
electrical wiring during a lightning storm.
The power requirement of each device connected to an outlet of
your power strip must not exceed the Outlet Power Rating of your
power strip (see Specifications). The total power requirements of
all devices connected to your power strip must not exceed the
Maximum Load Rating of your power strip (see Specifications).
CAUTION Only those who are properly trained or qualified to use
this device should do so. Anyone who is not trained or qualified
should not use this device unless it is under the supervision of
someone who is properly trained or qualified to do so.
Children must be supervised to ensure that they do not use the
device as a toy.
Never use the device if the cord and plug are damaged; if it is not
working properly, or if it has been dropped or damaged, take it to
an authorized service center for inspection and repair.
If the power cord is damaged, it must be replaced by the
manufacturer, its authorized service agent, or by qualified
personnel in order to avoid a danger.
The PDU provides the convenience of multiple outlets, but DOES NOT provide surge
or line noise protection for connected equipment.
The PDU is designed for indoor use only, in a controlled environment, away from
excess moisture, temperature extremes, conductive contaminants, dust or direct
sunlight.
Keep indoor ambient temperature between 32°F and 104°F (C and 40°C).
The PDU must be installed by a qualified technician only.
Only those who are properly trained or qualified to use this device should do so.
Anyone who is not trained or qualified should not use this device unless it is under
the supervision of someone who is properly trained or qualified to do so.
Do not attempt to mount the PDU to an insecure or unstable surface.
Install in accordance with National Electrical Code standards. Be sure to use the
proper overcurrent protection for the installation, in accordance with the plug/
equipment rating.
Important Safety Instructions
3
Connect the PDU to an outlet that is in accordance with your local building codes
and that is adequately protected against excess currents, short circuits and earth
faults.
The electrical outlets supplying power to the equipment should be installed near the
equipment and easily accessible.
Do not connect the PDU to an ungrounded outlet or to extension cords or adapters
that eliminate the connection to ground.
Be sure to provide a local disconnect device on any models that are permanently
installed without a plug that is easily accessible.
Never attempt to install electrical equipment during a thunderstorm.
Individual equipment connected to the PDU should not draw more current than the
individual PDU’s outlet’s rating.
The total load connected to the PDU must not exceed the maximum load rating for
the PDU.
Do not attempt to modify the PDU, input plugs or power cables.
Do not drill into or attempt to open any part of the PDU housing. There are no user-
serviceable parts inside.
Do not attempt to use the PDU if any part of it becomes damaged.
This equipment is not suitable for use in locations where children are likely to be
present.
Use of this equipment in life support applications where failure of this equipment
can reasonably be expected to cause the failure of the life support equipment or to
significantly affect its safety or effectiveness is not recommended.
The AC Main tolerance of this equipment is +6/-10%.


Specyfikacje produktu

Marka: Tripp Lite
Kategoria: Listwa zasilająca
Model: PDUMH32HVATNET

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Tripp Lite PDUMH32HVATNET, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Listwa zasilająca Tripp Lite

Instrukcje Listwa zasilająca

Najnowsze instrukcje dla Listwa zasilająca

Bauhn

Bauhn AP5W-0624 Instrukcja

15 Października 2024
Bauhn

Bauhn AP6W-0324 Instrukcja

15 Października 2024
Hama

Hama PowerCube 00223195 Instrukcja

9 Października 2024
CyberPower

CyberPower P0420SUD0-DE Instrukcja

9 Października 2024
CyberPower

CyberPower B0520SC0-DE Instrukcja

9 Października 2024
GoGen

GoGen SP16A5 Instrukcja

7 Października 2024
Bachmann

Bachmann Desk 2 Instrukcja

1 Października 2024