Instrukcja obsługi Tripp Lite PDUMH16HV

Tripp Lite Listwa zasilająca PDUMH16HV

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Tripp Lite PDUMH16HV (36 stron) w kategorii Listwa zasilająca. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/36
Owner’s Manual
Metered Rack PDU
Model: PDUMH16HV
(Series Number: AG-00D9)
Important Safety Instructions 2
Installation 3
Features 5
Warranty & Product Registration 7
Español 8
Français 15
Русский 22
Deutsch 29
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2019 Tripp Lite. All rights reserved.
PROTECT YOUR INVESTMENT!
Register your product for quicker service
and ultimate peace of mind.
You could also win an
ISOBAR6ULTRA surge protector—
a $100 value!
www.tripplite.com/warranty
18-11-319-93331C.indb 1 2/20/2019 4:44:40 PM
2
Important Safety Instructions
SAVE THESE INSTRUCTIONS
This manual contains instructions and warnings that should be
followed during the installation, operation and storage of this
product. Failure to heed these instructions may affect your
warranty.
Important Warnings
• Operate the PDU at indoor temperatures between 32°F and 104°F (between 0°C and 40°C)
only.
• Provide adequate protection against excess currents, short circuits, and ground faults in
accordance with local and national electrical code, such as NEC in the U.S.
• The mains socket that supplies the PDU should be near the PDU and easily accessible.
• The PDU provides convenient multiple outlets but it DOES NOT provide surge or line noise
protection for connected equipment.
• The PDU is designed for indoor use only in a controlled environment away from excess
moisture, temperature extremes, conductive contaminants, dust or direct sunlight.
• Do not connect the PDU to an ungrounded outlet or extension cords or adapters that
eliminate the connection to ground.
• The power requirement for each piece of equipment connected to the PDU must not exceed
the individual outlet's load rating.
• The total power requirement for equipment connected to the PDU must not exceed the
maximum load rating for the PDU.
• Do not drill into or attempt to open any part of the PDU housing. There are no user-serviceable
parts inside.
• Do not attempt to modify the PDU, including the input plugs and power cables.
• Do not attempt to use the PDU if any part of it becomes damaged.
• Do not attempt to mount the PDU to an insecure or unstable surface.
• Never attempt to install electrical equipment during a thunderstorm.
• Use of this equipment in life support applications where failure of this equipment can
reasonably be expected to cause the failure of the life support equipment or to significantly
affect its safety or effectiveness is not recommended. Do not use this equipment in the
presence of a flammable anesthetic mixture with air, oxygen or nitrous oxide.
• The PDU must be installed by a qualified technician only.
• Install in accordance with local electrical codes. Be sure to use the proper over current
protection for the installation, in accordance with the plug rating/equipment rating.
• The electrical sockets supplying power to the equipment shall be installed near the equipment
and be easily accessible.
18-11-319-93331C.indb 2 2/20/2019 4:44:40 PM
3
Installation
Note: Regardless of installation configuration, the user must determine the fitness of hardware
and procedures before mounting. The PDU and included hardware are designed for common
rack and rack enclosure types and may not be appropriate for all applications. Exact mounting
configurations may vary.
1-1 1U Rack Installation. Attach the PDU to
the rack by inserting four user-supplied
screws A through the PDU mounting
brackets B and into the mounting holes of
the rack rail as shown.
1-2 0U Rack Installation. Part 1: Remove the
screws C attaching the mounting brackets
to the PDU, change the orientation of the
brackets as shown and reattach the
brackets. Use only the screws supplied by
the manufacturer or their exact equivalent
(#6-32, 1/4” flat head). Attach the Part 2:
PDU vertically by inserting two or more user-
supplied screws A through the PDU
mounting brackets B and into mounting
points in the rack or rack enclosure.
1-3 Wall Installation. After repeating Part 1
above, attach the PDU to a stable mounting
surface by inserting two or more user-
supplied screws A through the PDU
mounting brackets B and into secure
mounting points on the mounting surface.
1-4 Under-Counter Installation. After repeating
Part 1 above, attach the PDU to a stable
mounting surface by inserting four user-
supplied screws A through the PDU
mounting brackets B and into secure
mounting points on the mounting surface.
1-1
1-4
1-2
1-3
A
A
B
B
A
A
B
B
C
C
C
18-11-319-93331C.indb 3 2/20/2019 4:44:41 PM

Specyfikacje produktu

Marka: Tripp Lite
Kategoria: Listwa zasilająca
Model: PDUMH16HV

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Tripp Lite PDUMH16HV, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Listwa zasilająca Tripp Lite

Tripp Lite

Tripp Lite Metered PDUMH20-6 Instrukcja

21 Września 2024
Tripp Lite

Tripp Lite PDUV20-60 Instrukcja

14 Września 2024
Tripp Lite

Tripp Lite PDUH32HV Instrukcja

13 Września 2024
Tripp Lite

Tripp Lite PDU3EVS6L2130 Instrukcja

11 Września 2024
Tripp Lite

Tripp Lite PDU3XMV6G32 Instrukcja

10 Września 2024
Tripp Lite

Tripp Lite PDUMH32HVATNET Instrukcja

9 Września 2024
Tripp Lite

Tripp Lite PS480806 Instrukcja

9 Września 2024
Tripp Lite

Tripp Lite PDU3V20D354A Instrukcja

9 Września 2024
Tripp Lite

Tripp Lite NSU-G24C2P08 Instrukcja

8 Września 2024
Tripp Lite

Tripp Lite PDU3VN6H50B Instrukcja

7 Września 2024

Instrukcje Listwa zasilająca

Najnowsze instrukcje dla Listwa zasilająca

Furman

Furman Merit M-8DX Instrukcja

14 Stycznia 2025
Brennenstuhl

Brennenstuhl 9+2m H07RN-F3G1,5 Instrukcja

12 Stycznia 2025
Sven

Sven SF-08E-16 Instrukcja

31 Grudnia 2025
Brennenstuhl

Brennenstuhl Estilo Instrukcja

29 Grudnia 2024
Huslog

Huslog EMX-190224 Instrukcja

24 Grudnia 2024
Vivanco

Vivanco EPLS 6ALU Instrukcja

7 Grudnia 2024
Vivanco

Vivanco EPLS 4USB_ALU Instrukcja

7 Grudnia 2024
Vivanco

Vivanco EPLS 4ALU Instrukcja

7 Grudnia 2024
Vivanco

Vivanco EPLS 3_1ALU2M Instrukcja

7 Grudnia 2024
Vivanco

Vivanco EBLS 3W2USB Instrukcja

7 Grudnia 2024